期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
井身结构对射孔段油管柱强度安全性影响分析 被引量:10
1
作者 窦益华 李明飞 +1 位作者 张福祥 杨向同 《石油机械》 北大核心 2012年第3期27-29,共3页
以某超深复杂井L101井射孔工程为例,通过改变射孔段长度、"口袋"长度和射孔比参数值,进行对比分析和研究,得出如下规律:(1)射孔段的长度对井底管柱的强度安全性产生的影响非常小,可不考虑其影响;(2)"口袋"长度对井... 以某超深复杂井L101井射孔工程为例,通过改变射孔段长度、"口袋"长度和射孔比参数值,进行对比分析和研究,得出如下规律:(1)射孔段的长度对井底管柱的强度安全性产生的影响非常小,可不考虑其影响;(2)"口袋"长度对井底管柱的强度安全性产生的影响不可忽视,应将其作为主要影响参数来考虑;(3)射孔比小于1.5,随着射孔比的增大,油套管峰值应力及封隔器处峰值压力呈减小趋势,有利于管柱安全;射孔比大于1.5,为了射孔管柱安全而继续扩展井下空间没有意义。 展开更多
关键词 聚能射孔 井身结构 射孔比 管柱强度 安全性影响
在线阅读 下载PDF
充填射孔枪的射孔液压力脉动及管柱应力分析
2
作者 窦益华 饶一伍 +3 位作者 李明飞 张伟 朱松青 梁经纬 《石油机械》 北大核心 2025年第4期56-63,共8页
射孔液充填射孔枪时的负压使射孔段管柱产生很大的下曳力,影响管柱和封隔器中心管的强度安全,但负压的量化一直是难点。建立射孔液压力脉动数值分析模型,分析射孔液充填射孔枪的压力脉动和负压及负压下的管柱安全。研究结果表明:16孔/m... 射孔液充填射孔枪时的负压使射孔段管柱产生很大的下曳力,影响管柱和封隔器中心管的强度安全,但负压的量化一直是难点。建立射孔液压力脉动数值分析模型,分析射孔液充填射孔枪的压力脉动和负压及负压下的管柱安全。研究结果表明:16孔/m、10 mm孔径,射孔液压力在1 ms达到最大值226.70 MPa,5 ms达到最小值24.80 MPa,随后做振幅减小的往复波动;孔密(16孔/m)不变,8、10、12 mm孔径时,最小压力分别为26.25、24.80、22.79 MPa,压差分别为214.23、201.9、189.2 MPa,说明孔径与负压呈负相关,最小降低到22.79 MPa;孔径10 mm不变,孔密为16、20、24孔/m时,最小压力分别为24.80、24.19、23.23 MPa,最大压差分别为201.9、211.81、215.19 MPa,说明孔密与负压呈负相关,最小降低到23.23 MPa。根据负压和鼓胀效应,得到了射孔段管柱和封隔器中心管的安全系数为1.43和1.24,说明射孔负压引起的下曳力可能是引发封隔器中心管损伤的主要因素。研究结果可为射孔段管柱安全强度分析提供新思路。 展开更多
关键词 射孔参数 射孔液 气液耦合 压力脉动 负压 管柱强度安全
在线阅读 下载PDF
高温高压井APR试油测试管柱中伸缩管作用机理分析 被引量:5
3
作者 贺秋云 黄靖富 吴军 《钻采工艺》 CAS 北大核心 2022年第5期75-79,共5页
高温高压井APR试油测试作业在储层改造、放喷测试等工况下井筒压力、温度会改变,APR试油测试管柱的长度会随着井筒环境的变化而发生改变,为了保障管柱在作业期间受力稳定,有时需要在管柱中设置伸缩管来补偿管柱的长度变化,因此,有必要... 高温高压井APR试油测试作业在储层改造、放喷测试等工况下井筒压力、温度会改变,APR试油测试管柱的长度会随着井筒环境的变化而发生改变,为了保障管柱在作业期间受力稳定,有时需要在管柱中设置伸缩管来补偿管柱的长度变化,因此,有必要对伸缩管在管柱中的工作机理进行系统的分析总结。文章从RTTS封隔器工作原理、性能包络线等方面阐释了伸缩管对封隔器保持有效坐封的影响,计算了伸缩管设置对管柱三轴应力强度安全系数的影响,最后分析了伸缩管对液压旁通阀工作的影响。通过现场实例分析,验证了伸缩管的设置应主要以液压旁通在井下的工作和提高管柱三轴应力强度安全系数为出发点,而以保持RTTS封隔器有效初始坐封压重为目的的做法不符合实际情况。分析结论对优化高温高压APR试油测试管柱中伸缩管的数量和下入深度、保持管柱的强度安全和井下测试工具的可靠性具有很好的指导作用。 展开更多
关键词 APR试油测试管柱 伸缩管 RTTS封隔器 完井设计 管柱长度 管柱强度 应力分析
在线阅读 下载PDF
Behavior of concrete and concrete-filled circular steel tubular stub columns at constant high temperatures 被引量:8
4
作者 丁发兴 余志武 《Journal of Central South University of Technology》 EI 2006年第6期726-732,共7页
Based on reanalyzing test results of uniaxial compressive behavior of concrete at constant high temperatures in China, with the compressive cube strength of concrete from 20 to 80 MPa, unified formulas for uniaxial co... Based on reanalyzing test results of uniaxial compressive behavior of concrete at constant high temperatures in China, with the compressive cube strength of concrete from 20 to 80 MPa, unified formulas for uniaxial compressive strength, elastic modulus, strain at peak uniaxial compression and mathematical expression for unaxial compressive stress-strain relations for the concrete at constant high temperatures were studied. Furthermore, the axial stress-axial strain relations between laterally confined concrete under axial compression and multiaxial stress-strain relations for steel at constant high temperatures were studied. Finally, based on continuum mechanics, the mechanics model for concentric cylinders of circular steel tube with concrete core of entire section loaded at constant high temperatures was established. Applying elasto-plastic analysis method, a FORTRAN program was developed, and the concrete-filled circular steel tubular (CFST) stub colunms at constant high temperatures were analyzed. The analysis results are in agreement with the experiment ones from references. 展开更多
关键词 CONCRETE concrete-filled steel tubular colunm BEHAVIOR high temperature
在线阅读 下载PDF
Experimental investigation of axially loaded steel fiber reinforced high strength concrete-filled steel tube columns 被引量:10
5
作者 卢亦焱 李娜 +1 位作者 李杉 梁鸿骏 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第6期2287-2296,共10页
An experimental study on the compressive behavior of steel fiber reinforced concrete-filled steel tube columns is presented. Specimens were tested to investigate the effects of the concrete strength, the thickness of ... An experimental study on the compressive behavior of steel fiber reinforced concrete-filled steel tube columns is presented. Specimens were tested to investigate the effects of the concrete strength, the thickness of steel tube and the steel fiber volume fraction on the ultimate strength and the ductility. The experimental results indicate that the addition of steel fibers in concrete can significantly improve the ductility and the energy dissipation capacity of the concrete-filled steel tube columns and delay the local buckling of the steel tube, but has no obvious effect on the failure mode. It has also been found that the addition of steel fibers is a more effective method than using thicker steel tube in enhancing the ductility, and more advantageous in the case of higher strength concrete. An analytical model to estimate the load capacity is proposed for steel tube columns filled with both plain concrete and steel fiber reinforced concrete. The predicted results are in good agreement with the experimental ones obtained in this work and literatures. 展开更多
关键词 concrete-filled steel tube (CFST) zolumns steel fiber high strength concrete axial load DUCTILITY load capacity
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部