为研究COREX预还原竖炉内煤气流动特性,利用数值模拟方法研究了炉内煤气停留时间分布(RTD),考察了AGD(Areal Gas Distribution)梁对COREX预还原竖炉炉内RTD的影响以及不同熔炼率下COREX预还原竖炉的RTD变化规律.模拟结果表明,随着2#CORE...为研究COREX预还原竖炉内煤气流动特性,利用数值模拟方法研究了炉内煤气停留时间分布(RTD),考察了AGD(Areal Gas Distribution)梁对COREX预还原竖炉炉内RTD的影响以及不同熔炼率下COREX预还原竖炉的RTD变化规律.模拟结果表明,随着2#COREX预还原竖炉AGD梁的安装,其整体时间密度分布函数变宽,平均停留时间变短,无量纲方差变大.AGD梁的安装增大了炉内的死区体积分数,2#COREX预还原竖炉炉内死区体积分数达到了26.81%.随着竖炉熔炼率的增加,炉内平均停留时间逐渐减小,无量纲方差逐渐增大.当熔炼率从150 t/h增长到180 t/h时,1#COREX竖炉死区体积分数降幅为68.1%,2#COREX竖炉降幅仅为15.52%.展开更多
文章利用数值模拟方法研究了COREX预还原竖炉内煤气停留时间分布(RTD)特性,分析了CGD (central gas distribution)装置对炉内煤气RTD分布特性的影响,并对不同熔炼率下炉内煤气RTD规律进行了研究。模拟结果表明,安装CGD后,增加了竖炉底...文章利用数值模拟方法研究了COREX预还原竖炉内煤气停留时间分布(RTD)特性,分析了CGD (central gas distribution)装置对炉内煤气RTD分布特性的影响,并对不同熔炼率下炉内煤气RTD规律进行了研究。模拟结果表明,安装CGD后,增加了竖炉底部中心供气,提高了煤气平均停留时间。此外,CGD的安装降低了炉内平均停留时间的无量纲方差,且有效减少了炉内死区体积分数,有利于炉内气固相间的还原反应及传质、传热。随着熔炼率增加,炉内煤气平均停留时间缩短,死区体积分数减小。展开更多
In order to reduce the materials cost of COREX ironmaking process,sinter has been introduced into the composite burden in China.This work explored the reducing process of sinter in COREX shaft furnace to clarify its r...In order to reduce the materials cost of COREX ironmaking process,sinter has been introduced into the composite burden in China.This work explored the reducing process of sinter in COREX shaft furnace to clarify its reduction properties change and then the effect of sinter proportion on metallurgical performance of composite burden was investigated.The results show that the reducing process of sinter in COREX shaft furnace was basically same with that in blast furnace but sinter seems like breaking faster.Under reducing condition simulated COREX shaft furnace,sinter possessed the worst reduction degradation index(RDI)and undifferentiated reduction index(RI)compared with pellet and iron ore lumps.Macroscopic and microscopic mineralogy changes indicated that sinter presents integral cracking while pellet and lump ore present surface cracking,and no simple congruent relationship exists between cracks of the burden and its ultimate reduction degradation performance.The existence of partial metallurgical performance superposition between composite and single ferrous burden was confirmed.RDI_(+6.3)≥70%and RDI_(+3.15)≥80%were speculated as essential requirements for the composite burden containing sinter in COREX shaft furnace.展开更多
文摘为研究COREX预还原竖炉内煤气流动特性,利用数值模拟方法研究了炉内煤气停留时间分布(RTD),考察了AGD(Areal Gas Distribution)梁对COREX预还原竖炉炉内RTD的影响以及不同熔炼率下COREX预还原竖炉的RTD变化规律.模拟结果表明,随着2#COREX预还原竖炉AGD梁的安装,其整体时间密度分布函数变宽,平均停留时间变短,无量纲方差变大.AGD梁的安装增大了炉内的死区体积分数,2#COREX预还原竖炉炉内死区体积分数达到了26.81%.随着竖炉熔炼率的增加,炉内平均停留时间逐渐减小,无量纲方差逐渐增大.当熔炼率从150 t/h增长到180 t/h时,1#COREX竖炉死区体积分数降幅为68.1%,2#COREX竖炉降幅仅为15.52%.
文摘文章利用数值模拟方法研究了COREX预还原竖炉内煤气停留时间分布(RTD)特性,分析了CGD (central gas distribution)装置对炉内煤气RTD分布特性的影响,并对不同熔炼率下炉内煤气RTD规律进行了研究。模拟结果表明,安装CGD后,增加了竖炉底部中心供气,提高了煤气平均停留时间。此外,CGD的安装降低了炉内平均停留时间的无量纲方差,且有效减少了炉内死区体积分数,有利于炉内气固相间的还原反应及传质、传热。随着熔炼率增加,炉内煤气平均停留时间缩短,死区体积分数减小。
基金Project(2019JJ51007)supported by the Natural Science Foundation of Hunan Province,China。
文摘In order to reduce the materials cost of COREX ironmaking process,sinter has been introduced into the composite burden in China.This work explored the reducing process of sinter in COREX shaft furnace to clarify its reduction properties change and then the effect of sinter proportion on metallurgical performance of composite burden was investigated.The results show that the reducing process of sinter in COREX shaft furnace was basically same with that in blast furnace but sinter seems like breaking faster.Under reducing condition simulated COREX shaft furnace,sinter possessed the worst reduction degradation index(RDI)and undifferentiated reduction index(RI)compared with pellet and iron ore lumps.Macroscopic and microscopic mineralogy changes indicated that sinter presents integral cracking while pellet and lump ore present surface cracking,and no simple congruent relationship exists between cracks of the burden and its ultimate reduction degradation performance.The existence of partial metallurgical performance superposition between composite and single ferrous burden was confirmed.RDI_(+6.3)≥70%and RDI_(+3.15)≥80%were speculated as essential requirements for the composite burden containing sinter in COREX shaft furnace.
