Considering the self-excited and forced vibrations in high-speed milling processes, a novel method for dynamic optimization of system stability is used to determine the cutting parameters and structural parameters by ...Considering the self-excited and forced vibrations in high-speed milling processes, a novel method for dynamic optimization of system stability is used to determine the cutting parameters and structural parameters by increasing the chatter free material removal rate （CF-MRR） and surface finish. The method is hased on the theory of the chatter stability and the semi-bandwidth of the resonant region. The objective function of the method is material removal rate（MRR）,the constraints are chatter stability and surface finish, and the optimizing variables are cutting and structural parameters. The optimization procedure is stated. The method is applied to a milling system and CF-MRR is increased 18.86%. It is shown that the influences of the chatter stability and the resonance are simultaneously considered in the dynamic optimization of the milling system for increasing CF-MRR and the surface finish.展开更多
Based on a shallow roadway with weakly cemented soft strata in western China, this paper studies the range and degree of plastic zones in soft strata roadways with weak cementation. Geological radars were used to moni...Based on a shallow roadway with weakly cemented soft strata in western China, this paper studies the range and degree of plastic zones in soft strata roadways with weak cementation. Geological radars were used to monitor the loose range and level of surrounding rocks. A mechanical model of weakly cemented roadway was established, including granular material based on the measured results. The model was then used to determine the plastic zone radium. The predicted results agree well with measured results which provide valuable theoretical references for the analysis of surrounding rock stability and support reinforcing design of weakly cemented roadways. Finally, a combined supporting scheme of whole section bolting and grouting was proposed based on the original supporting scheme. It is proved that this support plan can effectively control the deformation and plastic zone expansion of the roadway surrounding rock and thus ensure the long-term stable and safe mining.展开更多
Optimization of machining parameters is of great importance for multi-pass end milling because machining parameters adversely or positively affect the time and quality of production.This paper develops a second-order ...Optimization of machining parameters is of great importance for multi-pass end milling because machining parameters adversely or positively affect the time and quality of production.This paper develops a second-order fulldiscretization method(2ndFDM)-based 3-D stability prediction model for simultaneous optimization of spindle speed,axial cutting depth and radial cutting depth.The optimal machining parameters in each pass are obtained to achieve the minimum production time comprehensive considering constraints of 3-D stability,machine tool performance,tool life and machining requirements.A cloud drop-enabled particle swarm optimization(CDPSO)algorithm is proposed to solve the developed machining parameter optimization,and 13 benchmark problems are used to evaluate CDPSO algorithm.Numerical results show that CDPSO algorithm has a certain advantage in computational cost as well as comparable search quality and robustness.A demonstrative example is provided.展开更多
In this paper, the stability of a concave spherical stem bulkhead under the pumping load when still lying at the slipway is analyzed. The stability of the spherical stem bulkhead with different shell thickness and rei...In this paper, the stability of a concave spherical stem bulkhead under the pumping load when still lying at the slipway is analyzed. The stability of the spherical stem bulkhead with different shell thickness and reinforcing forms is discussed. According to the results of stability analysis, the optimization design of the spherical stem bulkhead stability is performed. On the basis of considering the machining technical requirements of the bulkhead, a rational design of the spherical stem bulkhead structure is obtained. This paper has a certain value to the design of submarine's spherical stem bulkhead.展开更多
In recent years, sinmlated annealing algo-rithms have been extensively developed and uti-lized to solve nmlti-objective optimization problems. In order to obtain better optimization perfonmnce, this paper proposes a N...In recent years, sinmlated annealing algo-rithms have been extensively developed and uti-lized to solve nmlti-objective optimization problems. In order to obtain better optimization perfonmnce, this paper proposes a Novel Adaptive Simulated Annealing （NASA） algorithm for constrained multi-objective optimization based on Archived Multi-objective Simulated Annealing （AMOSA）. For han-dling multi-objective, NASA makes improverrents in three aspects： sub-iteration search, sub-archive and adaptive search, which effectively strengthen the stability and efficiency of the algorithnm For handling constraints, NASA introduces corresponding solution acceptance criterion. Furtherrrore, NASA has also been applied to optimize TD-LTE network perform-ance by adjusting antenna paranleters; it can achieve better extension and convergence than AMOSA, NS-GAII and MOPSO. Analytical studies and simulations indicate that the proposed NASA algorithm can play an important role in improving multi-objective optimi-zation performance.展开更多
Centrifugal forces are commonly created when ships turn, which may cause a ship to capsize in a critical situation. A mathematical model has been developed to optimize the stability coefficients for ship, with the aim...Centrifugal forces are commonly created when ships turn, which may cause a ship to capsize in a critical situation. A mathematical model has been developed to optimize the stability coefficients for ship, with the aim to prevent capsizing and to increase ship maneuverability in high-speed water craft. This model can be used to develop algorithms for control system improvement. The mathematical model presented in this paper optimized the use of multipurpose hydrofoils to reduce heeling and the trimming moment, maintaining an upright ship’s position and lessening the resistance via transverse force. Conventionally, the trimming and heeling of a ship are controlled using ballast water;however, under variable sea conditions it is sometimes difficult to control a ship’s motion using ballast water. In this case, a hydrofoil would be more stable and maneuverable than a ballast tank controlled vessel. A movable hydrofoil could theoretically be adapted from moveable aerofoil technology. This study proves the merit of further investigation into this possibility.展开更多
A nonlinear model predictive control problem based on pseudo-linear neural network (PNN) is discussed, in which the second order on-line optimization method is adopted. The recursive computation of Jacobian matrix is ...A nonlinear model predictive control problem based on pseudo-linear neural network (PNN) is discussed, in which the second order on-line optimization method is adopted. The recursive computation of Jacobian matrix is investigated. The stability of the closed loop model predictive control system is analyzed based on Lyapunov theory to obtain the sufficient condition for the asymptotical stability of the neural predictive control system. A simulation was carried out for an exothermic first-order reaction in a continuous stirred tank reactor.It is demonstrated that the proposed control strategy is applicable to some of nonlinear systems.展开更多
基金Supported by the National Key Basic Research Program of China("973"Project)(2009CB724401)the China Postdoctoral Science Foundation(20070420208)the Postdoctoral Innovation Foundation of Shandong Province(200702023)~~
文摘Considering the self-excited and forced vibrations in high-speed milling processes, a novel method for dynamic optimization of system stability is used to determine the cutting parameters and structural parameters by increasing the chatter free material removal rate （CF-MRR） and surface finish. The method is hased on the theory of the chatter stability and the semi-bandwidth of the resonant region. The objective function of the method is material removal rate（MRR）,the constraints are chatter stability and surface finish, and the optimizing variables are cutting and structural parameters. The optimization procedure is stated. The method is applied to a milling system and CF-MRR is increased 18.86%. It is shown that the influences of the chatter stability and the resonance are simultaneously considered in the dynamic optimization of the milling system for increasing CF-MRR and the surface finish.
基金provided by the National 973 Programs(No.2014CB046905)the National Natural Science Foundation of China(Nos.51274191 and 51404245)+1 种基金the Doctoral Fund of Ministry of Education(No.20130095110018)China Postdoctoral Science Foundation(No.2014M551699)
文摘Based on a shallow roadway with weakly cemented soft strata in western China, this paper studies the range and degree of plastic zones in soft strata roadways with weak cementation. Geological radars were used to monitor the loose range and level of surrounding rocks. A mechanical model of weakly cemented roadway was established, including granular material based on the measured results. The model was then used to determine the plastic zone radium. The predicted results agree well with measured results which provide valuable theoretical references for the analysis of surrounding rock stability and support reinforcing design of weakly cemented roadways. Finally, a combined supporting scheme of whole section bolting and grouting was proposed based on the original supporting scheme. It is proved that this support plan can effectively control the deformation and plastic zone expansion of the roadway surrounding rock and thus ensure the long-term stable and safe mining.
基金supported partially by the National Science Foundation of China(No.51775279)National Defense Basic Scientific Research Program of China(No. JCKY201605B006)+1 种基金Fundamental Research Funds for the Central Universities(No. NT2021019)Jiangsu Industry Foresight and Common Key Technology (No. BE2018127)
文摘Optimization of machining parameters is of great importance for multi-pass end milling because machining parameters adversely or positively affect the time and quality of production.This paper develops a second-order fulldiscretization method(2ndFDM)-based 3-D stability prediction model for simultaneous optimization of spindle speed,axial cutting depth and radial cutting depth.The optimal machining parameters in each pass are obtained to achieve the minimum production time comprehensive considering constraints of 3-D stability,machine tool performance,tool life and machining requirements.A cloud drop-enabled particle swarm optimization(CDPSO)algorithm is proposed to solve the developed machining parameter optimization,and 13 benchmark problems are used to evaluate CDPSO algorithm.Numerical results show that CDPSO algorithm has a certain advantage in computational cost as well as comparable search quality and robustness.A demonstrative example is provided.
文摘In this paper, the stability of a concave spherical stem bulkhead under the pumping load when still lying at the slipway is analyzed. The stability of the spherical stem bulkhead with different shell thickness and reinforcing forms is discussed. According to the results of stability analysis, the optimization design of the spherical stem bulkhead stability is performed. On the basis of considering the machining technical requirements of the bulkhead, a rational design of the spherical stem bulkhead structure is obtained. This paper has a certain value to the design of submarine's spherical stem bulkhead.
基金supported by the Major National Science & Technology Specific Project of China under Grants No.2010ZX03002-007-02,No.2009ZX03002-002,No.2010ZX03002-002-03
文摘In recent years, sinmlated annealing algo-rithms have been extensively developed and uti-lized to solve nmlti-objective optimization problems. In order to obtain better optimization perfonmnce, this paper proposes a Novel Adaptive Simulated Annealing （NASA） algorithm for constrained multi-objective optimization based on Archived Multi-objective Simulated Annealing （AMOSA）. For han-dling multi-objective, NASA makes improverrents in three aspects： sub-iteration search, sub-archive and adaptive search, which effectively strengthen the stability and efficiency of the algorithnm For handling constraints, NASA introduces corresponding solution acceptance criterion. Furtherrrore, NASA has also been applied to optimize TD-LTE network perform-ance by adjusting antenna paranleters; it can achieve better extension and convergence than AMOSA, NS-GAII and MOPSO. Analytical studies and simulations indicate that the proposed NASA algorithm can play an important role in improving multi-objective optimi-zation performance.
文摘Centrifugal forces are commonly created when ships turn, which may cause a ship to capsize in a critical situation. A mathematical model has been developed to optimize the stability coefficients for ship, with the aim to prevent capsizing and to increase ship maneuverability in high-speed water craft. This model can be used to develop algorithms for control system improvement. The mathematical model presented in this paper optimized the use of multipurpose hydrofoils to reduce heeling and the trimming moment, maintaining an upright ship’s position and lessening the resistance via transverse force. Conventionally, the trimming and heeling of a ship are controlled using ballast water;however, under variable sea conditions it is sometimes difficult to control a ship’s motion using ballast water. In this case, a hydrofoil would be more stable and maneuverable than a ballast tank controlled vessel. A movable hydrofoil could theoretically be adapted from moveable aerofoil technology. This study proves the merit of further investigation into this possibility.
文摘A nonlinear model predictive control problem based on pseudo-linear neural network (PNN) is discussed, in which the second order on-line optimization method is adopted. The recursive computation of Jacobian matrix is investigated. The stability of the closed loop model predictive control system is analyzed based on Lyapunov theory to obtain the sufficient condition for the asymptotical stability of the neural predictive control system. A simulation was carried out for an exothermic first-order reaction in a continuous stirred tank reactor.It is demonstrated that the proposed control strategy is applicable to some of nonlinear systems.
