期刊文献+
共找到11篇文章
< 1 >
每页显示 20 50 100
耐热、耐电压性离子性液体
1
《现代化工》 CAS CSCD 北大核心 2002年第12期64-64,共1页
关键词 日本日清纺织公司 开发成功 有机盐 离子性液体电解质 耐电压 离子性液体
在线阅读 下载PDF
工业规模的离子性液体替代有机溶剂
2
《现代化工》 CAS CSCD 北大核心 2003年第1期65-66,共2页
关键词 工业规模 离子性液体 替代 有机溶剂 德国创新溶剂公司
在线阅读 下载PDF
离子性液体能溶解纤维素
3
《现代化工》 CAS CSCD 北大核心 2002年第10期64-65,共2页
关键词 离子性液体 溶解纤维素 阿拉巴马大学 有机溶剂
在线阅读 下载PDF
室温离子性液体提高聚合物性能
4
《现代化工》 CAS CSCD 北大核心 2002年第12期64-64,共1页
关键词 室温离子性液体 聚合物 美国新墨西哥州首府圣大非科学与技术公司
在线阅读 下载PDF
芳香性季铵型离子液体催化Friedel-Crafts酰基化反应 被引量:1
5
作者 严正星 孙羽 +1 位作者 段晓晓 尹大学 《化学与生物工程》 CAS 2017年第11期49-51,共3页
以合成的芳香性季铵型离子液体为催化剂,以叔丁基苯和乙酰氯为原料合成了对叔丁基苯乙酮,并与无水三氯化铝催化反应进行了对比,考察了催化剂用量、反应时间、溶剂等因素对反应的影响。结果表明:以季铵型离子液体作催化剂,以二氯甲烷为溶... 以合成的芳香性季铵型离子液体为催化剂,以叔丁基苯和乙酰氯为原料合成了对叔丁基苯乙酮,并与无水三氯化铝催化反应进行了对比,考察了催化剂用量、反应时间、溶剂等因素对反应的影响。结果表明:以季铵型离子液体作催化剂,以二氯甲烷为溶剂,叔丁基苯为0.3mol,n(叔丁基苯)∶n(乙酰氯)∶n(离子液体)=1∶1∶2.5,反应温度为10℃,反应时间为2h时,对叔丁基苯乙酮产率可达87.9%。 展开更多
关键词 芳香离子液体 对叔丁基苯乙酮 三氯化铝 叔丁基苯 乙酰氯 FRIEDEL-CRAFTS反应
在线阅读 下载PDF
离子液体[BMIM]_3[CB3GA]萃取溶菌酶的影响因素分析 被引量:1
6
作者 娄本浊 《应用化工》 CAS CSCD 2012年第3期417-419,423,共4页
以离子液体[BMIM]3[CB3GA]作为萃取剂在不同操作条件下进行溶菌酶萃取实验。结果表明,[BMIM]3[CB3GA]离子液体的浓度为4 mmol/L、萃取时间为30 min及溶液呈酸性时,对溶菌酶的萃取效果最佳,可达90%以上;多次回收离子液体进行重复萃取时,[... 以离子液体[BMIM]3[CB3GA]作为萃取剂在不同操作条件下进行溶菌酶萃取实验。结果表明,[BMIM]3[CB3GA]离子液体的浓度为4 mmol/L、萃取时间为30 min及溶液呈酸性时,对溶菌酶的萃取效果最佳,可达90%以上;多次回收离子液体进行重复萃取时,[BMIM]3[CB3GA]对溶菌酶的萃取率无明显下降,也可维持在90%以上。 展开更多
关键词 亲和离子液体 溶菌酶 萃取率 影响因素
在线阅读 下载PDF
用Aliquat 336提取裂解钯及从离子性液相中直接回收钯的电化学研究
7
作者 张丽霞(摘译) 《湿法冶金》 CAS 2006年第1期42-42,共1页
为从硝酸溶液中将钯萃取到有机相然后直接电积金属,P.Giridhar,等研究了室温离子性液体的电化学和离子变换性能。用工业Aliquat 336离子性液体,三-n-辛基甲基氯化铵(TOMAC)和三-n-辛基甲基硝酸铵(TOMAN)研究了钯的萃取。钯在TO... 为从硝酸溶液中将钯萃取到有机相然后直接电积金属,P.Giridhar,等研究了室温离子性液体的电化学和离子变换性能。用工业Aliquat 336离子性液体,三-n-辛基甲基氯化铵(TOMAC)和三-n-辛基甲基硝酸铵(TOMAN)研究了钯的萃取。钯在TOMAN中的分配比随硝酸浓度的升高而升高,在硝酸浓度为1.0mol/L时有最大值。相反,钯在TOMAC中的分配比随硝酸浓度的升高而连续下降。少量水和硝酸也随钯一起被萃入到有机相。 展开更多
关键词 室温离子性液体 电化学研究 直接回收 甲基氯化铵 液相 裂解 提取 硝酸溶液 TOMAC
在线阅读 下载PDF
有多种工业用途的纳米结晶性硅
8
《现代化工》 CAS CSCD 北大核心 2003年第4期63-63,共1页
关键词 纳米结晶 室温离子性液体 稳定聚合物 组成
在线阅读 下载PDF
Molecular simulation study of the microstructures and properties of pyridinium ionic liquid[HPy][BF_(4)]mixed with acetonitrile
9
作者 XU Jian-Qiang MA Zhao-Peng +2 位作者 CHENG Si LIU Zhi-Cong ZHU Guang-Lai 《原子与分子物理学报》 CAS 北大核心 2025年第4期27-32,共6页
The microstructures and thermodynamic properties of mixed systems comprising pyridinium ionic liquid[HPy][BF_(4)]and acetonitrile at different mole fractions were studied using molecular dynamics simulation in this wo... The microstructures and thermodynamic properties of mixed systems comprising pyridinium ionic liquid[HPy][BF_(4)]and acetonitrile at different mole fractions were studied using molecular dynamics simulation in this work.The following properties were determined:density,self-diffusion coefficient,excess molar volume,and radial distribution function.The results show that with an increase in the mole fraction of[HPy][BF_(4)],the self-diffusion coefficient decreases.Additionally,the excess molar volume initially decreases,reaches a minimum,and then increases.The rules of radial distribution functions(RDFs)of characteristic atoms are different.With increasing the mole fraction of[HPy][BF_(4)],the first peak of the RDFs of HA1-F decreases,while that of CT6-CT6 rises at first and then decreases.This indicates that the solvent molecules affect the polar and non-polar regions of[HPy][BF_(4)]differently. 展开更多
关键词 Pyridinium ionic liquids Thermodynamic properties Molecular dynamics simulation Radial distribution functions
在线阅读 下载PDF
太阳电池用新凝胶
10
《现代化工》 CAS CSCD 北大核心 2003年第4期63-63,共1页
关键词 太阳电池 凝胶 室温离子性液体 稳定聚合物 组成
在线阅读 下载PDF
Influence of alkylpyridinium ionic liquids on copper electrodeposition from acidic sulfate electrolyte 被引量:3
11
作者 张启波 华一新 +1 位作者 任艳旭 陈立源 《Journal of Central South University》 SCIE EI CAS 2013年第8期2096-2102,共7页
The effect of two alkylpyridinium ionic liquids (py-iLs) including N-butylpyridinium hydrogen sulfate (BpyHSO4) and N-hexylpyridinium hydrogen sulfate (HpyHSO4) on the kinetics of copper electrodeposition from a... The effect of two alkylpyridinium ionic liquids (py-iLs) including N-butylpyridinium hydrogen sulfate (BpyHSO4) and N-hexylpyridinium hydrogen sulfate (HpyHSO4) on the kinetics of copper electrodeposition from acidic sulfate solution was investigated by cyclic voltammetry and potentiodynamic polarization measurements. Results from cyclic voltammetry indicate that these py-iLs have a pronounced inhibiting effect on CuE+ electroreduction and there exists a typical nucleation and growth process. Kinetic parameters such as Tafel slope, transfer coefficient and exchange current density obtained from Tafel plots, lead to the conclusion that py-iLs inhibit the charge transfer by slightly changing the copper electrodeposition mechanism through their adsorption on the cathodic surface. In addition, scanning electron microscope (SEM) and X-ray diffraction analyses reveal that the presence of these additives leads to more leveled and fine-grained cathodic deposits without changing the crystal structure of the electrodeposited copper but strongly affects the crystallographic orientation by significantly inhibiting the growth of (111), (200) and (311) planes. 展开更多
关键词 copper electrodeposition ADDITIVES ionic liquids electrokinetic parameter ADSORPTION
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部