期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
UV/Fe(Ⅲ)工艺对络合态重金属的去除效果及机理
1
作者 丁语馨 杨正恒 +3 位作者 马晓明 余瑾 金青海 何頔 《土木与环境工程学报(中英文)》 北大核心 2025年第1期213-220,共8页
UV/Fe(Ⅲ)工艺是一种处理络合态重金属的新型组合工艺,该工艺先通过Fe(Ⅲ)的置换作用释放游离重金属离子,然后通过UV辐照对有机配体进行降解,最后通过碱性沉淀去除络合态重金属。以Cu(Ⅱ)-EDTA、Ni(Ⅱ)-EDTA为目标污染物,采用UV/Fe(Ⅲ)... UV/Fe(Ⅲ)工艺是一种处理络合态重金属的新型组合工艺,该工艺先通过Fe(Ⅲ)的置换作用释放游离重金属离子,然后通过UV辐照对有机配体进行降解,最后通过碱性沉淀去除络合态重金属。以Cu(Ⅱ)-EDTA、Ni(Ⅱ)-EDTA为目标污染物,采用UV/Fe(Ⅲ)工艺对其进行去除,通过去除效果对比和机理分析,对组合工艺去除效果差异的内部机理进行阐述,并提出相应的优化方案。结果表明,UV/Fe(Ⅲ)工艺对Cu(Ⅱ)-EDTA、Ni(Ⅱ)-EDTA的去除效果存在较大差异,对两种络合态重金属中Cu、Ni的去除率分别为70%和41%。通过高效液相色谱(HPLC)、分光光度法、苯甲酸(BA)探针实验,确定Cu(Ⅱ)-EDTA、Ni(Ⅱ)-EDTA去除效果差异的主要原因是Fe(Ⅲ)对Cu(Ⅱ)、Ni(Ⅱ)的置换效果有明显差异,置换率分别是85%、22%。对Ni(Ⅱ)-EDTA置换过程分别进行Fe(Ⅲ)投加量和反应温度优化,结果表明,反应温度优化可以显著提升Fe(Ⅲ)对Ni(Ⅱ)-EDTA的置换效率。将反应温度提升至35℃,Ni去除率从41%提升至60%。反应温度在UV/Fe(Ⅲ)工艺中对Ni(Ⅱ)-EDTA的去除至关重要,适当升温有助于提高置换率,进而提升去除率。 展开更多
关键词 络合态重金属 三价铁置换 UV辐照 碱性沉淀 反应温度
在线阅读 下载PDF
复合工艺处理电镀综合废水 被引量:5
2
作者 童祯恭 李玉山 鲁秀国 《环境科学与技术》 CAS CSCD 北大核心 2009年第4期170-172,共3页
利用二氧化氯氧化破氰-铁屑内电解降铬-碱性沉淀复合工艺对某一电镀综合废水进行了处理,处理后的污水水质达到了《污水综合排放标准》(GB8978-1996)一级排放标准的要求。文章从电镀废水的水质水量、工艺流程、流程说明、主要构筑物以及... 利用二氧化氯氧化破氰-铁屑内电解降铬-碱性沉淀复合工艺对某一电镀综合废水进行了处理,处理后的污水水质达到了《污水综合排放标准》(GB8978-1996)一级排放标准的要求。文章从电镀废水的水质水量、工艺流程、流程说明、主要构筑物以及投资和运行结果等几方面对此工程进行了说明,对同类型污水处理具有一定的指导意义。 展开更多
关键词 二氧化氯氧化 铁屑内电解 碱性沉淀 电镀综合废水
在线阅读 下载PDF
Production and characterization of alkaline extracellular lipase from newly isolated strain Aspergillus awamori HB-03 被引量:1
3
作者 夏金兰 黄斌 +1 位作者 聂珍媛 王威 《Journal of Central South University》 SCIE EI CAS 2011年第5期1425-1433,共9页
A strain HB-03 to produce alkaline extracellular lipase was isolated from oil-rich soil samples and identified as Aspergillus awamori. The growth conditions and nutritional factors for lipase production by strain HB-0... A strain HB-03 to produce alkaline extracellular lipase was isolated from oil-rich soil samples and identified as Aspergillus awamori. The growth conditions and nutritional factors for lipase production by strain HB-03 were optimized, and the maximum lipase production of (45.9±2.3) U/mL was obtained at 30 ℃ and pH 7.0 after 36 h using olive oil (1%) and sucrose (0.5%) as carbon sources and combination of peptone (2%), yeast extract (0.5%) and ammonium sulfate (0.1%) as nitrogen sources. The lipase was purified to homogeneity with 10.6-fold, 18.84% yield and a specific activity of 1 862.2 U/mg using ammonium sulfate precipitation followed by SephadexG-75 gel filtration chromatography. The purified lipase with molecular mass of 68 ku was estimated by SDS-PAGE. The optimum pH and temperature for the purified lipase were found to be 8.5 and 40 ℃, respectively. The lipase kept more than 80% of activity in pH 7.0-10.0 and temperatures up to 45 ℃. The metal ions of Mn2+, Ba2+ significantly enhanced the lipase activity, whereas Cu2+, Fe3+ and Mg2+ strongly reduced the lipase activity. The Km and Vmax values of the purified enzyme for p-nitrophenyl palmitate were 0.13 mrnol/L and 60.6 mmol/(L.min), respectively. The results show that this novel lipase has potential industrial applications. 展开更多
关键词 alkaline lipase Aspergillus awamori PURIFICATION CHARACTERIZATION
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部