[SiO2/FePt]5/Ag thin films were deposited by RF magnetron sputtering on the glass substrates and post annealing at 550 ℃ for 30 min in vacuum. Vibrating sample magnetometer and X-ray diffraction analyser were applied...[SiO2/FePt]5/Ag thin films were deposited by RF magnetron sputtering on the glass substrates and post annealing at 550 ℃ for 30 min in vacuum. Vibrating sample magnetometer and X-ray diffraction analyser were applied to study the magnetic properties and microstructures of the films. The results show that without Ag underlayer [SiO2/FePt]5 films deposited onto the glass are FCC disordered; with the addition of Ag underlayer [SiO]FePt]5/Ag films are changed into L10 and （111） mixed texture. The variation of the SiO2 nonmagnetic layer thickness in [SiO2/FePt]5/Ag films indicates that SiO2-doping plays an important role in improving the order parameter and the perpendicular magnetic anisotropy, and reducing the grain size and intergrain interactions. By controlling SiO2 thickness the highly perpendicular magnetic anisotropy can be obtained in the [SiO2 （0.6 nm）/FePt （3 nm）]5/Ag （50 nm） films and highly （001）-oriented films can be obtained in the [SiO2 （2 nm）/FePt （3 nm）]5/Ag （50 nm） films.展开更多
The structural changes of silicate anions in the desilication process with the addition of calcium hydrate alumino-carbonate were studied by measuring Raman spectra, infrared spectra and corresponding second derivativ...The structural changes of silicate anions in the desilication process with the addition of calcium hydrate alumino-carbonate were studied by measuring Raman spectra, infrared spectra and corresponding second derivative spectra. The results show that the desilication ratio in the solution prepared by the addition of sodium silicate(solution-SS) is much greater than that in the solution by the addition of green liquor(solution-GL), and low alumina concentration in the sodium aluminate solutions facilitates the desilication process. It is also shown that alumino-silicate anions in the solution-GL, and Q^3 polymeric silicate anions in solution-SS are predominant, respectively. In addition, increasing the concentration of silica favors respectively the formation of the alumino-silicate or the Q^3 silicate anions in the solution-GL or the solution-SS. Therefore, it can be inferred that the low desilication ratio in the silicate-bearing aluminate solution is mainly attributed to the existence of alumino-silicate anions.展开更多
In the present work,samples of Al-Si-Cu piston alloy after T6 heat treatment were exposed for 2 h at temperatures ranging from 400 to 550°C.The evolution of surface roughness and microstructure of the alloy durin...In the present work,samples of Al-Si-Cu piston alloy after T6 heat treatment were exposed for 2 h at temperatures ranging from 400 to 550°C.The evolution of surface roughness and microstructure of the alloy during thermal exposure was studied by combination methods of roughness profiles,optical and scanning electron microscopy as well as XRD analysis.It is found that the roughness and mass of the alloy increase with the raise of the thermal exposure temperature,and the increasing rates of them are slow as the exposure temperature is below 500°C,but accelerates abruptly when the temperature is higher than 500°C.The variation of surface roughness of the alloy is closely related to phase transformation and oxidation during the thermal exposure.展开更多
Low-temperature sintering and properties of LTCC （low temperature co-fired ceramics） materials based on CaO-BaO-Al2O3-B2O3-SiO2 glass and various fillers such as Al2O3, silica glass, christobalite, AlN, ZrO2, MgO-Si...Low-temperature sintering and properties of LTCC （low temperature co-fired ceramics） materials based on CaO-BaO-Al2O3-B2O3-SiO2 glass and various fillers such as Al2O3, silica glass, christobalite, AlN, ZrO2, MgO-SiO2, TiO2 were investigated. The results show that densification, crystallization, microstructures and dielectric properties of the composites are found to strongly depend on the type of filler. The densification process of glass/ceramic composites with various fillers is mainly from 600 ℃ to 925 ℃, and the initial compacting temperature of samples is 600 ℃. The initial rapid densification of samples starts at its glass softening temperature. LTCC compositions containing Al2O3, silica glass, AlN and MgO-SiO2 fillers start to have the crystallization peaks at 890, 903, 869 and 844 ℃, respectively. The crystallization peaks are believed as correlated to the crystallization of CaAl2SiO8, β-SiO2, Ca2Al2SiO7 and β-SiO2. The composite ceramic with Al2O3, silica glass and TiO2 ceramic have a better dense structure and better smooth fracture surface. Sample for Al2O3 has the lowest dielectric loss tanδ value of 0.00091, whereas the sample for MgO.SiO, has the highest dielectric loss tanδ value of 0.02576. The sample for TiO2 has the highest dielectric constant value of 14.46, whereas the sample for AIN has the lowest dielectric constant value of 4.61.展开更多
The one-dimensional photonic crystals of Ag/SiO_(2) system are studied to investigate the photonic band gaps (PBG). The samples were prepared by the ultra-high vacuum electron beam evaporation. The clear band gaps wer...The one-dimensional photonic crystals of Ag/SiO_(2) system are studied to investigate the photonic band gaps (PBG). The samples were prepared by the ultra-high vacuum electron beam evaporation. The clear band gaps were observed. Satisfactory agreement between experimental and calculated results was obtained without fitting. The thickness of SiO_(2 )film has influence on the photonic band gap, as well as it awfully affects the transmittance of Ag. More layers can get clearer PBG.展开更多
基金Project(10574085) supported by the National Natural Science Foundation of ChinaProject(207020) supported by the Science Technology Key Project of the Ministry of Education, China
文摘[SiO2/FePt]5/Ag thin films were deposited by RF magnetron sputtering on the glass substrates and post annealing at 550 ℃ for 30 min in vacuum. Vibrating sample magnetometer and X-ray diffraction analyser were applied to study the magnetic properties and microstructures of the films. The results show that without Ag underlayer [SiO2/FePt]5 films deposited onto the glass are FCC disordered; with the addition of Ag underlayer [SiO]FePt]5/Ag films are changed into L10 and （111） mixed texture. The variation of the SiO2 nonmagnetic layer thickness in [SiO2/FePt]5/Ag films indicates that SiO2-doping plays an important role in improving the order parameter and the perpendicular magnetic anisotropy, and reducing the grain size and intergrain interactions. By controlling SiO2 thickness the highly perpendicular magnetic anisotropy can be obtained in the [SiO2 （0.6 nm）/FePt （3 nm）]5/Ag （50 nm） films and highly （001）-oriented films can be obtained in the [SiO2 （2 nm）/FePt （3 nm）]5/Ag （50 nm） films.
基金Project(51274242)supported by the National Natural Science Foundation of ChinaProject(2015CX001)supported by the Innovation-driven Plan in Central South University,China
文摘The structural changes of silicate anions in the desilication process with the addition of calcium hydrate alumino-carbonate were studied by measuring Raman spectra, infrared spectra and corresponding second derivative spectra. The results show that the desilication ratio in the solution prepared by the addition of sodium silicate(solution-SS) is much greater than that in the solution by the addition of green liquor(solution-GL), and low alumina concentration in the sodium aluminate solutions facilitates the desilication process. It is also shown that alumino-silicate anions in the solution-GL, and Q^3 polymeric silicate anions in solution-SS are predominant, respectively. In addition, increasing the concentration of silica favors respectively the formation of the alumino-silicate or the Q^3 silicate anions in the solution-GL or the solution-SS. Therefore, it can be inferred that the low desilication ratio in the silicate-bearing aluminate solution is mainly attributed to the existence of alumino-silicate anions.
基金Project(DLBF2018-KY-JS-066-J)supported by China North Engine Research InstituteProject(XAGDXJJ17008)supported by the Principal Fund of Xi’an Technological University,ChinaProjects(19JK0400,19JK0402)supported by the Education Fund of Shaanxi Province,China。
文摘In the present work,samples of Al-Si-Cu piston alloy after T6 heat treatment were exposed for 2 h at temperatures ranging from 400 to 550°C.The evolution of surface roughness and microstructure of the alloy during thermal exposure was studied by combination methods of roughness profiles,optical and scanning electron microscopy as well as XRD analysis.It is found that the roughness and mass of the alloy increase with the raise of the thermal exposure temperature,and the increasing rates of them are slow as the exposure temperature is below 500°C,but accelerates abruptly when the temperature is higher than 500°C.The variation of surface roughness of the alloy is closely related to phase transformation and oxidation during the thermal exposure.
基金Project supported by the Priority Academic Program Development(PAPD)of Jiangsu Higher Education Institutions ChinaProject(CXZZ12_0415) supported by Innovation Foundation for Graduate Students of Jiangsu Province ChinaProject(IRT1146) supported by Changjiang Scholars and Innovative Research Team in University(PCSIRT),China
文摘Low-temperature sintering and properties of LTCC （low temperature co-fired ceramics） materials based on CaO-BaO-Al2O3-B2O3-SiO2 glass and various fillers such as Al2O3, silica glass, christobalite, AlN, ZrO2, MgO-SiO2, TiO2 were investigated. The results show that densification, crystallization, microstructures and dielectric properties of the composites are found to strongly depend on the type of filler. The densification process of glass/ceramic composites with various fillers is mainly from 600 ℃ to 925 ℃, and the initial compacting temperature of samples is 600 ℃. The initial rapid densification of samples starts at its glass softening temperature. LTCC compositions containing Al2O3, silica glass, AlN and MgO-SiO2 fillers start to have the crystallization peaks at 890, 903, 869 and 844 ℃, respectively. The crystallization peaks are believed as correlated to the crystallization of CaAl2SiO8, β-SiO2, Ca2Al2SiO7 and β-SiO2. The composite ceramic with Al2O3, silica glass and TiO2 ceramic have a better dense structure and better smooth fracture surface. Sample for Al2O3 has the lowest dielectric loss tanδ value of 0.00091, whereas the sample for MgO.SiO, has the highest dielectric loss tanδ value of 0.02576. The sample for TiO2 has the highest dielectric constant value of 14.46, whereas the sample for AIN has the lowest dielectric constant value of 4.61.
基金Supported by the National High Technology Development Program of China(Grant No.2003AA32720)Shanghai Nanotechnology Promotion Center(0352nm016, 0359nm204,0252nm084)+2 种基金Science and Technology Council of Shanghai(03dz11009)Fore-research of basic research project(2001CCA02800)the special Foundation for State Major Basic Research Programmeof China(Grant No.001CB610408)
文摘The one-dimensional photonic crystals of Ag/SiO_(2) system are studied to investigate the photonic band gaps (PBG). The samples were prepared by the ultra-high vacuum electron beam evaporation. The clear band gaps were observed. Satisfactory agreement between experimental and calculated results was obtained without fitting. The thickness of SiO_(2 )film has influence on the photonic band gap, as well as it awfully affects the transmittance of Ag. More layers can get clearer PBG.
