Based on the analysis of the properties of oily sludge samples,the effect of modification parameters,such as liquid to solid (L/S) ratio,agitation temperature,agitation intensity,agitation time and pH on the modificat...Based on the analysis of the properties of oily sludge samples,the effect of modification parameters,such as liquid to solid (L/S) ratio,agitation temperature,agitation intensity,agitation time and pH on the modification of oily sludge was investigated with the content of oil remnants in dry sludge as a reference index. Remixing experiments were carried out according to a simplex-lattice design,where Sx4056 was used as the demulsifier,petroleum sulfonate as the surfactant and sodium silicate (Na2SiO3) as the dispersant. The surface modification reagent formulation was optimized by a regression equation on the modified effect and based on the amounts of surface modification reagents. The results show that the content of the oil remaining in dry oily sludge is 0.28% of 10.15% oily sludge,when the reagent concentration rises to 3.5 g/L under the optimum experimental conditions.展开更多
In the interest of accelerating aniline degradation, Fe2+ and chelated Fe2+ activated persulfate oxidations were investigated in neutral pH condition. Three kinds of chelating agents were selected including citric aci...In the interest of accelerating aniline degradation, Fe2+ and chelated Fe2+ activated persulfate oxidations were investigated in neutral pH condition. Three kinds of chelating agents were selected including citric acid, oxalic acid and ethylenediamine tetraaceatate(EDTA) to maintain available Fe2+. The results indicate that the concentration of chelating agent and ferrous ion didn't follow a linear relationship with the degradation rate of aniline. A 1/1 ratio of chelating agent/Fe2+ results in a higher degradation rate compared to the results by other ratios. The oxidation enhancement factor using oxalic acid was found to be relatively low. In contrast, citric acid is more suitable chelating agent in the ferrous iron activated persulfate system and aniline exhibits a highest degradation with a persulfate/Fe2+/citric acid/aniline molar ratio of 50/25/25/1 compared to other molar ratios.展开更多
One-pot synthesis of cyclic aldol tetramer and α, β-unsaturated aldol from C3-C8 linear aldehydes using phase-transfer catalyst（PTC）, quaternary ammonium, combined with sodium hydroxide as catalysts was investigat...One-pot synthesis of cyclic aldol tetramer and α, β-unsaturated aldol from C3-C8 linear aldehydes using phase-transfer catalyst（PTC）, quaternary ammonium, combined with sodium hydroxide as catalysts was investigated. Butanal was subjected for detail investigations to study the effect of parameters. It was found that the selectivity of cyclic aldol tetramer depends greatly on the operating conditions of the reaction, especially the PTC/butanal molar ratio. The average selectivity of 2-hydroxy-6-propyl-l, 3, 5-triethyl-3-cyclohexene-1-carboxaldehyde（HPTECHCA） was 54.41% using tetrabutylammonium chloride combined with 14%（mass fraction） Na OH as catalysts at 60 ℃for 2 h with a PTC-to-butanal molar ratio of 0.09：1. Pentanal was more likely to generate cyclic aldol tetramer compared with other aldehydes under the optimum experimental conditions. Recovery of the PTC through water washing followed by adding enough sodium hydroxide from the washings was also demonstrated.展开更多
基金Project(50974119) supported by the National Natural Science Foundation of ChinaProject(2006A019) supported by the Science and Technology Fund of China University of Mining and Technology
文摘Based on the analysis of the properties of oily sludge samples,the effect of modification parameters,such as liquid to solid (L/S) ratio,agitation temperature,agitation intensity,agitation time and pH on the modification of oily sludge was investigated with the content of oil remnants in dry sludge as a reference index. Remixing experiments were carried out according to a simplex-lattice design,where Sx4056 was used as the demulsifier,petroleum sulfonate as the surfactant and sodium silicate (Na2SiO3) as the dispersant. The surface modification reagent formulation was optimized by a regression equation on the modified effect and based on the amounts of surface modification reagents. The results show that the content of the oil remaining in dry oily sludge is 0.28% of 10.15% oily sludge,when the reagent concentration rises to 3.5 g/L under the optimum experimental conditions.
基金Project(2010B050200007)supported by the Foundation of Science and Technology Planning Project of Guangdong Province,ChinaProject(2011ZM0054)supported by the Fundamental Research Funds for the Central Universities,China+1 种基金Project(2011K0013)supported by the Research Fund Program of Guangdong Provincial Key Laboratory of Environmental Pollution Control and Remediation Technology,ChinaProject(2012)supported by the Research Funds of Guangdong Provincial Key Laboratory of Atmospheric environment and Pollution Control,China
文摘In the interest of accelerating aniline degradation, Fe2+ and chelated Fe2+ activated persulfate oxidations were investigated in neutral pH condition. Three kinds of chelating agents were selected including citric acid, oxalic acid and ethylenediamine tetraaceatate(EDTA) to maintain available Fe2+. The results indicate that the concentration of chelating agent and ferrous ion didn't follow a linear relationship with the degradation rate of aniline. A 1/1 ratio of chelating agent/Fe2+ results in a higher degradation rate compared to the results by other ratios. The oxidation enhancement factor using oxalic acid was found to be relatively low. In contrast, citric acid is more suitable chelating agent in the ferrous iron activated persulfate system and aniline exhibits a highest degradation with a persulfate/Fe2+/citric acid/aniline molar ratio of 50/25/25/1 compared to other molar ratios.
基金Project(2013AA064102)supported by the National High-Tech Research Program of ChinaProject(11JJ6014)supported by the Hunan Provincial Natural Science Foundation of China
文摘One-pot synthesis of cyclic aldol tetramer and α, β-unsaturated aldol from C3-C8 linear aldehydes using phase-transfer catalyst（PTC）, quaternary ammonium, combined with sodium hydroxide as catalysts was investigated. Butanal was subjected for detail investigations to study the effect of parameters. It was found that the selectivity of cyclic aldol tetramer depends greatly on the operating conditions of the reaction, especially the PTC/butanal molar ratio. The average selectivity of 2-hydroxy-6-propyl-l, 3, 5-triethyl-3-cyclohexene-1-carboxaldehyde（HPTECHCA） was 54.41% using tetrabutylammonium chloride combined with 14%（mass fraction） Na OH as catalysts at 60 ℃for 2 h with a PTC-to-butanal molar ratio of 0.09：1. Pentanal was more likely to generate cyclic aldol tetramer compared with other aldehydes under the optimum experimental conditions. Recovery of the PTC through water washing followed by adding enough sodium hydroxide from the washings was also demonstrated.
