期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
仿生疏液表面对浇注PBX药浆的低黏附性能研究 被引量:1
1
作者 祝青 蒋全萍 +3 位作者 王德海 郑保辉 李尚斌 罗观 《含能材料》 EI CAS CSCD 北大核心 2020年第1期71-75,共5页
降低浇注高聚物粘接炸药(PBX)药浆与接触材料的黏附作用是提高浇注固化PBX制备工艺水平和效率的关键因素之一。采用溶液刻蚀方法在接触容器金属表面构筑微米-纳米多级复合仿生结构,使高黏液端羟基聚丁二烯(HTPB)和浇注PBX药浆在金属表... 降低浇注高聚物粘接炸药(PBX)药浆与接触材料的黏附作用是提高浇注固化PBX制备工艺水平和效率的关键因素之一。采用溶液刻蚀方法在接触容器金属表面构筑微米-纳米多级复合仿生结构,使高黏液端羟基聚丁二烯(HTPB)和浇注PBX药浆在金属表面的静态接触角均大于130°,表面具有良好的疏液性能,且通过调整刻蚀时间为120 min时,在金属表面形成仿花状的微纳米复合结构,可使金属表面与HTPB、HTPB/Al和HTPB/1,1-二氨基-2,2-二硝基乙烯(Fox-7)药浆间的黏附作用力分别降低至29.4,46.0μN和12.7μN,下降幅值达57%~82%。同时将仿生结构涂覆于模具内表面,宏观实现对PBX药浆不黏附特性。 展开更多
关键词 浇注高聚物粘接炸药(PBX)药浆 仿生表面 微纳米多级结构 疏液表面 黏附性
在线阅读 下载PDF
疏液壁面上亲液杂质对滑移特性的影响 被引量:1
2
作者 鲍路瑶 罗凯 +1 位作者 文俊 胡海豹 《力学学报》 EI CSCD 北大核心 2017年第4期811-817,共7页
纳米流动系统具有高效、经济等优势,在众多领域具有广泛的应用前景.因该类系统具有极高的表面积体积比,致使界面滑移效应对流动具有显著影响.论文采用非平衡分子动力学模拟方法,研究了疏液壁面表层混入少量亲液原子时纳米通道内液体的... 纳米流动系统具有高效、经济等优势,在众多领域具有广泛的应用前景.因该类系统具有极高的表面积体积比,致使界面滑移效应对流动具有显著影响.论文采用非平衡分子动力学模拟方法,研究了疏液壁面表层混入少量亲液原子时纳米通道内液体的滑移特性,并基于分子动理论解释了其影响机制.研究发现,亲液杂质(均布或集中)对液体法向密度振荡程度影响较弱,但会显著改变壁面附近类固体层的分布和液体滑移规律;随亲液杂质占比增加,液体类固体现象更趋明显,壁面处液体接触密度也线性增大,但通道内液体平均速度逐渐降低,滑移长度也迅速减小;相比于集中的亲液杂质,均匀分布亲液杂质对滑移的弱化效应更强.如当亲液杂质占比为28%时,其滑移长度比单纯疏液表面的降低率从50%扩大至56%.基于分子动理论的分析发现,亲液杂质会导致杂质原子附近第一液体层内的原子发生跃迁的能垒加大,即弱化了液体原子的流向跃迁行为,从而降低了滑移量;相比于集中杂质,均匀分布的杂质还会降低固液间的非公度性,致使滑移特性破坏更严重. 展开更多
关键词 疏液表面 杂质 滑移 分子动力学
在线阅读 下载PDF
Transition of super-hydrophobic states of droplet on rough surface 被引量:2
3
作者 叶霞 周明 +2 位作者 蒋大林 李健 蔡兰 《Journal of Central South University》 SCIE EI CAS 2010年第3期554-559,共6页
Twelve samples with periodic array square pillars microstructure were prepared on the silicon wafer by plasma etching techniques, on which space b of the square pillars increased from 5 to 60 μm. In order to study th... Twelve samples with periodic array square pillars microstructure were prepared on the silicon wafer by plasma etching techniques, on which space b of the square pillars increased from 5 to 60 μm. In order to study the effect ofb on the wettability of the rough surface, the effects of apparent contact angle (CA) and sliding angle (a) of the droplet on the rough surface were measured with the contact angle meter. The results show that the experimental values of CA well agree with the classical wetting theory and a decreases with the increase of b. Two drop shapes exist on the samples' surface, corresponding to the Cassie state and the Wenzel state respectively. The contact state in which a drop would settle depends typically on the size of b. On the role of gravitation, the irreversible transition of a drop from Cassie state to Wenzel state should occur at a certain space of the square pillars. Since the transition has implications on the application of super-hydrophobic rough surfaces, theoretically, the prediction of wetting state transition on square pillar array micro-structured surfaces provides an intuitionistic guidance for the design of steady superhydrophobic surfaces. 展开更多
关键词 square pillar microstructure wetting mode transition apparent contact angle sliding angle
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部