期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
红外加热器电-热辐射转换效率与辐射面温度相互关系的探讨
1
作者 余永良 《红外技术》 CSCD 1991年第6期37-40,共4页
从实验测试与理论分析两方面对金属管状红外辐射加热器的电-热辐射转换效率与辐射面温度之间的关系进行了探讨,指出两者之间不存在一一对应的关系,要获得理想的电-热转换效率,达到最佳加热效果,必须做大量的试验研究。
关键词 红外加热器 电-热辐射 转换效率
在线阅读 下载PDF
Synthesis and thermoelectric properties of Mg_2Si_(1-x)Sn_x solid solutions by microwave irradiation 被引量:4
2
作者 周书才 白晨光 《Journal of Central South University》 SCIE EI CAS 2012年第9期2421-2424,共4页
In order to reduce the oxidizing and volatilizing caused by Mg element in the traditional methods for synthesizing Mg2Sil-xSnx (x=0.2, 0.4, 0.6, 0.8) solid solutions, microwave irradiation techniques were used in pr... In order to reduce the oxidizing and volatilizing caused by Mg element in the traditional methods for synthesizing Mg2Sil-xSnx (x=0.2, 0.4, 0.6, 0.8) solid solutions, microwave irradiation techniques were used in preparing them as thermoelectric materials. Structure and phase composition of the obtained materials were investigated by X-ray diffraction (XRD). The electrical conductivity, Seebeck coefficient and thermal conductivity were measured as a function of temperature from 300 to 750 K. It is found that Mg2Si1-xSnx solid solutions are well formed with excessive content of 5% (molar fraction) Mg from the stoichiometric MgESil.xSnx under microwave irradiation. A maximum dimensionless figure of merit, ZT, of about 0.26 is obtained for Mg2Si1-xSnx solid solutions at about 500 K for x=0.6. 展开更多
关键词 Mg2Si1-xSnx thermoelectric material solid solution microwave synthesis
在线阅读 下载PDF
半导体制热实木复合地板的传热性能评价
3
作者 刘霄 于志明 +2 位作者 张扬 郭晋 曾广琛 《北京林业大学学报》 CAS CSCD 北大核心 2023年第5期155-162,共8页
【目的】以物理力学性能达标为前提,研究不同材料与结构组成的半导体制热多层实木复合地板的电热性能,为电热地板的优化设计提供理论依据。【方法】从电热地板的构效关系角度出发,以地板断面密度为核心,采用材种优选、正交组坯和结构对... 【目的】以物理力学性能达标为前提,研究不同材料与结构组成的半导体制热多层实木复合地板的电热性能,为电热地板的优化设计提供理论依据。【方法】从电热地板的构效关系角度出发,以地板断面密度为核心,采用材种优选、正交组坯和结构对称等方式设计出4种不同的电热地板结构方案。通过分析不同结构地板断面密度对传热效果的影响,比较评价其电热性能和使用能耗。【结果】为保证传热效率,半导体电热层应置于基材和面板之间,功率密度应设置在200~300 W/m^(2)的范围内,更为科学合理。经综合评价电热地板的传热效率、保温性能和能耗等指标,基材为混合树种的C结构,即表层为2层桦木,芯层为3层桉木的对称结构为设计方案中的最优结构。C结构电热地板在功率密度为300 W/m^(2)时表面平衡温度达到47.3℃,电-热辐射转换效率为76.7%,平均自然降温幅度为29.3%。达到目标温度45.4℃所消耗的电量为1 877.4×10^(-3) kW·h。【结论】不同材种与结构的地板断面密度差异较大,对导热系数、传热过程与电热性能有显著影响。在制备电热地板基材时,采用密度高、导热系数高、强度大的材种作外层,密度低、导热系数低、强度小的材种作芯层,形成“夹芯”结构可在保证电热地板尺寸稳定性等物理力学性能的基础上有效改善电热性能与能耗。 展开更多
关键词 半导体制热 实木复合地板 结构设计 热性能 能耗 电-热辐射转换效率
在线阅读 下载PDF
Application of micro/nanoscale thermal radiation to thermophotovoltaic system 被引量:1
4
作者 王爱华 蔡九菊 《Journal of Central South University》 SCIE EI CAS 2011年第6期2176-2184,共9页
Thermophotovoltaic (TPV) system has been regarded as one promising means to alleviate current energy demand because it can directly generate electricity from radiation heat via photons. However, the presently availa... Thermophotovoltaic (TPV) system has been regarded as one promising means to alleviate current energy demand because it can directly generate electricity from radiation heat via photons. However, the presently available TPV systems suffer from low conversion efficiency and low throughput. A viable solution to increase their efficiency is to apply micro/nanoscale radiation principles in the design of different components to utilize the characteristics ~f thermal radiation at small distances and in microstructures. Several critical issues are reviewed, such as photovoltaic effect, quantum efficiency and efficiency of TPV system. Emphasis is given to the development of wavelength-selective emitters and filters and the aspects of micro/nanoscale heat transfer. Recent progress, along with the challenges and opportunities for future development of TPV systems are also outlined. 展开更多
关键词 thermophotovoltaic system micro/nanoscale radiation quantum efficiency EMITTER filter photon tunneling
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部