期刊文献+
共找到26篇文章
< 1 2 >
每页显示 20 50 100
SF6高压电器设计(第5版)简介 被引量:1
1
《高压电器》 CAS CSCD 北大核心 2019年第9期260-260,共1页
SF6高压/特高压电器设计、使用帮手环保气体高压电器探索、研发的思路输配电同行后来着创新、攀登的梯石由机械工业出版的《SF6高压电器设计》(第5版)又与读者见面了。第5版保留了SF6高压电器的基本理论和经典的结构设计方法,对SF6电器... SF6高压/特高压电器设计、使用帮手环保气体高压电器探索、研发的思路输配电同行后来着创新、攀登的梯石由机械工业出版的《SF6高压电器设计》(第5版)又与读者见面了。第5版保留了SF6高压电器的基本理论和经典的结构设计方法,对SF6电器某些尚未处理好的遗留问题作了深入的探讨并提出了解决方案。在第5版中作者从产品设计者的角度对SF6混合气体和替代气体的研究和应用作了综述与点评,对环保气体高压电器的研发思路进行了梳理,拉开了我国高压电器制造行业研发环保高压器的序幕。第5版主要的调整和增补简介如下。 展开更多
关键词 SF6电器 电器设计 特高压 SF6混合气体 高压电器 结构设计方法 机械工业 遗留问题
在线阅读 下载PDF
《SF6高压电器设计》修订版即将出版发行
2
作者 黎斌 《高压电器》 CAS CSCD 北大核心 2007年第4期321-321,共1页
《SF6高压电器设计》自2003年初版与高压电器制造、运行与科研技术人员见面后,受到热烈的欢迎。该书初版早已售完,不少读者关注着再版的信息。
关键词 电器设计 SF6 出版发行 高压 修订 电器制造 技术人员
在线阅读 下载PDF
《SF_6高压电器设计》第三版问世
3
《高压电器》 CAS CSCD 北大核心 2010年第1期48-48,共1页
深受高压电器行业和电力部门关注的《SF6高压电器设计》自2002年出版以来,因再次脱销,作者再次修改补充.该书第三版于2010年1月与读者见面了。
关键词 电器设计 第三版 SF6 高压 电力部门 电器行业
在线阅读 下载PDF
对住宅电器设计的几点建议
4
作者 徐宏 《林业科技情报》 1995年第4期49-49,共1页
由于家用电器的增多,使用电量增加,现结合本地区住宅电器设计中的一些做法,说几点个人的看法。 一、线路敷设及导线选择 现今住宅建筑的楼板多为空心板,故配线多采用沿墙、板缝、板孔暗配线。选用一般半硬塑料管施工方便,造价也低,但不... 由于家用电器的增多,使用电量增加,现结合本地区住宅电器设计中的一些做法,说几点个人的看法。 一、线路敷设及导线选择 现今住宅建筑的楼板多为空心板,故配线多采用沿墙、板缝、板孔暗配线。选用一般半硬塑料管施工方便,造价也低,但不利于防止火灾发生;选用钢管配线则工程造价高也不如半硬塑料管施工方便;从工程造价。 展开更多
关键词 电器设计 工程造价 硬塑料管 开关箱 住宅建筑 防止火灾 导线选择 保护接地线 电度表 施工方便
在线阅读 下载PDF
计算机辅助CAXA在电力继电器设计的应用
5
作者 张茂松 《电气制造》 2011年第6期83-84,共2页
介绍了计算机辅助CAXA实体设计软件及电力继电器应用CAXA实体设计的技术和方法。建立了一套电力继电器三维实体零件和装配图库。采用CAXA实体设计软件作动画演示,模拟继电器动作过程。
关键词 CAXA实体设计 电力继电器 计算机辅助 电器设计 应用 三维实体 动画演示 动作过程
在线阅读 下载PDF
开关电器现代设计方法 被引量:1
6
作者 刘志远 纽春萍 《高压电器》 CAS CSCD 北大核心 2019年第1期107-107,共1页
《开关电器现代设计方法》一书可作为高等学校电气工程专业本科生及研究生课程的教材,也可做为开关电器行业工程师的参考书。此书的目的是采用开关电器现代设计方法搭建一座桥梁,将开关电器产品的设计与相关的基础研究成果联系起来。传... 《开关电器现代设计方法》一书可作为高等学校电气工程专业本科生及研究生课程的教材,也可做为开关电器行业工程师的参考书。此书的目的是采用开关电器现代设计方法搭建一座桥梁,将开关电器产品的设计与相关的基础研究成果联系起来。传统的开关电器设计较多地依赖设计工程师的经验,对开关电器采用尝试法进行“定性”设计,试制出试品后,不断地通过实验对设计进行修正,因此传统的开关电器设计方法是一种“试错”型的经验积累方法。随着对开关电器涉及的各物理场认识的不断深入,人们开始采用科学的方法如数值仿真技术和先进测试技术设计开关电器产品,以获得更好的性能和更高的可靠性,开关电器现代设计方法应运而生。与传统设计方法相比,开关电器的现代设计方法更强调对物理场的“定量”掌握。 展开更多
关键词 现代设计方法 开关电器 数值仿真技术 电气工程专业 电器产品 电器设计 研究生课程 高等学校
在线阅读 下载PDF
强微电器标志设计
7
作者 林文周 《包装工程》 CAS 北大核心 2020年第8期340-340,共1页
设计说明:本作品以强微电器设计的"强微"拼音首字母为设计元素,对字母进行了图形化处理并解组重构,将"QW"两个字母重叠,企业辨识度高。整体标志采用青蓝色为主色调,体现其行业特征,并辅以红色点缀,意为强微在行业... 设计说明:本作品以强微电器设计的"强微"拼音首字母为设计元素,对字母进行了图形化处理并解组重构,将"QW"两个字母重叠,企业辨识度高。整体标志采用青蓝色为主色调,体现其行业特征,并辅以红色点缀,意为强微在行业内永征高峰的发展战略和决心。外轮廓采用方形包围,展现其严谨的企业态度。整体图形虚实结合,颜色搭配和谐统一。 展开更多
关键词 颜色搭配 设计说明 外轮廓 标志设计 图形化处理 虚实结合 电器设计 辨识度
在线阅读 下载PDF
家用电器变压器的设计计算与实践
8
作者 陈红亮 陈升芳 《现代电子技术》 2012年第18期192-194,共3页
变压器直接影响着家用电器的使用性能,因此,变压器的设计属于家用电器设计中重要的一个环节。在此提出家用电源变压器的设计方法,系统地叙述了变压器的变压器电路中电流、电动势及绕组每伏匝数的设计计算过程。并以某家用电器公司实际... 变压器直接影响着家用电器的使用性能,因此,变压器的设计属于家用电器设计中重要的一个环节。在此提出家用电源变压器的设计方法,系统地叙述了变压器的变压器电路中电流、电动势及绕组每伏匝数的设计计算过程。并以某家用电器公司实际使用的变压器为例做了验证。实践证明该方法切实有效,为从事家用电器设计工作人员、或者售后维修服务人员提供参考材料。 展开更多
关键词 家用电器 变压器 家用电器设计 售后服务
在线阅读 下载PDF
动态神经网络法及在多变量电器优化设计中的研究 被引量:16
9
作者 曹云东 刘晓明 +1 位作者 刘冬 王尔智 《中国电机工程学报》 EI CSCD 北大核心 2006年第8期112-116,共5页
将人工神经网络优化方法引入电器优化设计的研究中,提出动态神经网络的新方法。在充分利用人工神经网络强大的非线形逼近能力和较高效率的优势同时,研究了逼近性能与优化空间、样本采集、计算精度提高等动态有序变化的策略。通过对非线... 将人工神经网络优化方法引入电器优化设计的研究中,提出动态神经网络的新方法。在充分利用人工神经网络强大的非线形逼近能力和较高效率的优势同时,研究了逼近性能与优化空间、样本采集、计算精度提高等动态有序变化的策略。通过对非线形振荡函数寻优和500kVGIS盆式绝缘子电器产品的结构优化设计,证明文中提出的动态神经网络方法是可行、有效的。为复杂结构、多变量电气产品的优化设计提供了一种新的高效优化设计方法。 展开更多
关键词 人工神经网络 电器优化设计 盆式绝缘子 电场
在线阅读 下载PDF
液压系统的电器优化设计 被引量:1
10
作者 赵童力 李维亮 贾永峰 《机床与液压》 北大核心 2019年第20期78-82,共5页
针对现有数控机床液压系统发生各种故障时无任何直接判断手段的现状进行改进,加入一套自我检测的电器线路设计,发生故障时能够直接通过相应灯光显示给予直观提示,便于人员判断问题和及时修复。
关键词 液压系统 自我检测 电器设计
在线阅读 下载PDF
10 kW低浓铀月表反应堆电源系统概念设计与分析 被引量:1
11
作者 高兴 姜硕 +2 位作者 关则钏 赵泽龙 胡古 《电源技术》 CAS 北大核心 2024年第3期527-535,共9页
针对未来月球科研站所面临的能源需求问题,提出一种采用低浓化U-Mo合金燃料和热管冷却的月球表面反应堆电源系统的新型概念设计。低浓化U-Mo合金燃料技术成熟,在RERTR项目中被作为主要燃料而得到广泛使用。采用低浓化U-Mo合金燃料,能够... 针对未来月球科研站所面临的能源需求问题,提出一种采用低浓化U-Mo合金燃料和热管冷却的月球表面反应堆电源系统的新型概念设计。低浓化U-Mo合金燃料技术成熟,在RERTR项目中被作为主要燃料而得到广泛使用。采用低浓化U-Mo合金燃料,能够有效降低核扩散的风险和简化相关部门的监管流程。反应堆的额定热功率为180 kW,输出电功率≥10 kW,设计寿命为10年。反应堆为Na热管冷却的快中子反应堆,采用控制鼓对堆芯反应性进行控制,堆芯热量通过Na热管传递到半Heusler型温差发电模块,废热由Hg热管辐射器翅片辐射到太空。基于蒙特卡洛程序RMC和CFD软件对反应堆堆芯物理及热工进行了初步计算和分析,针对温差发电器件的热电转换性能进行了优化设计,对热管失效等假想事故进行了分析评价。结果表明,该反应堆设计能够满足中子物理设计和临界安全的要求,在稳态工况下温差发电器件的热电转换效率能够达到7.60%,系统能够有效输出≥10 kW电功率,热管级联失效时能够满足热工安全要求。 展开更多
关键词 月表反应堆电源系统 热管反应堆 中子物理特性 温差发电器结构设计 热管失效事故
在线阅读 下载PDF
单相电压型PWM整流器交流侧电感的设计 被引量:8
12
作者 张兴 杨孝志 +1 位作者 刘正之 张崇巍 《合肥工业大学学报(自然科学版)》 CAS CSCD 2004年第1期31-34,共4页
文章在分析稳态条件下单相电压型PWM整流器(VSR)交流侧矢量关系的基础上,提出了一种基于矢量关系的单相VSR4象限运行时的交流侧电感参数的设计方案,给出了忽略交流侧电阻且只考虑基波分量时交流侧电感的计算公式,并论证了交流侧电阻对... 文章在分析稳态条件下单相电压型PWM整流器(VSR)交流侧矢量关系的基础上,提出了一种基于矢量关系的单相VSR4象限运行时的交流侧电感参数的设计方案,给出了忽略交流侧电阻且只考虑基波分量时交流侧电感的计算公式,并论证了交流侧电阻对电感参数取值的影响可以忽略。仿真结果验证了设计方案的正确性。 展开更多
关键词 单相电压型 PWM整流器 交流侧电感 电器设计 脉宽调制
在线阅读 下载PDF
提高带换向器式电动机家用电器的电磁兼容性能 被引量:7
13
作者 刘萍 沙斐 《北方交通大学学报》 CSCD 北大核心 2002年第6期64-68,共5页
带换向器式电动机的家用电器会产生严重的电磁骚扰.根据其产生电磁骚扰的原因及途径,阐述了抑制带换向器式电机的家用电器电磁骚扰的措施.并强调了在产品的设计初期就应该考虑其电磁兼容性能.
关键词 家用电器 换向器式电动机 电磁兼容性能 电磁骚扰 电磁屏蔽 电器设计
在线阅读 下载PDF
C6132普通车床数控化改造及电气控制设计 被引量:6
14
作者 徐良雄 《组合机床与自动化加工技术》 北大核心 2012年第4期60-64,68,共6页
以C6132型普通车床为研究对象,采用GSK928TE数控系统对C6132型普通车床进行数控技术改造的方法,成功地将C6132型普通车床改造成为C6132型数控车床。阐述了GSK928TE数控系统的系统配置、功能及GSK928TE数控系统在普通车床上的应用,讨论了... 以C6132型普通车床为研究对象,采用GSK928TE数控系统对C6132型普通车床进行数控技术改造的方法,成功地将C6132型普通车床改造成为C6132型数控车床。阐述了GSK928TE数控系统的系统配置、功能及GSK928TE数控系统在普通车床上的应用,讨论了C6132型普通车床电气控制设计的改造及其改造后的效果。改造后的数控车床系统分辨率纵向为0.001mm,横向为0.0005mm,大大提高了机械零件的加工精度。为企业技术改造提供了一种途径。 展开更多
关键词 车床改造 数控系统 电器控制设计
在线阅读 下载PDF
以弱电信号控制强电信号的电路设计
15
作者 张艳萍 孙振元 《电测与仪表》 北大核心 1999年第7期46-47,共2页
介绍了光发射器及光接收器的工作原理,
关键词 光发射器 光接收器 电路设计 信号传递 电器设计
在线阅读 下载PDF
Coordinated and uncoordinated design of LFO damping controllers with IPFC and PSS using ICA and SFLA 被引量:1
16
作者 Mahdi Toupchi Khosroshahi Farhad Mohajel Kazemi +1 位作者 Mohammad Reza Jannati Oskuee Sajad Najafi-Ravadanegh 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第9期3418-3426,共9页
A single machine-infinite-bus(SMIB) system including the interline power flow controllers(IPFCs) and the power system stabilizer(PSS) controller is addressed. The linearized system model is considered for investigatin... A single machine-infinite-bus(SMIB) system including the interline power flow controllers(IPFCs) and the power system stabilizer(PSS) controller is addressed. The linearized system model is considered for investigating the interactions among IPFC and PSS controllers. To improve the stability of whole system again different disturbances, a lead-lag controller is considered to produce supplementary signal. The proposed supplementary controller is implemented to improve the damping of the power system low frequency oscillations(LFOs). Imperialist optimization algorithm(ICA) and shuffled frog leaping algorithm(SFLA) are implemented to search for optimal supplementary controllers and PSS parameters. Moreover, singular value decomposition(SVD) method is utilized to select the most effective damping control signal of IPFC lead-lag controllers. To evaluate the system performance, different operating conditions are considered. Reponses of system in five modes including uncoordinated and coordinated modes of IPFC and PSS using ICA and SFLA are studied and compared. Considering the results, response of system without controller shows the highest overshoot and the longest settling time for rotor angel at the different operating conditions. In this mode of system, rotor speed has the highest overshoot. Rotor angel in the system with only PSS includes lower overshoot and oscillation than system without controller. When PSS is only implemented, rotor speed deviation has the longest settling time. Rotor speed deviation in the uncoordinated mode of IPFC and PSS shows lower overshoot than system with only PSS and without controller. It is noticeable that in this mode, rotor angel has higher overshoot than system with only PSS. The superiority of the suggested ICA-based coordinated controllers is obvious compared with SFLA-based coordinated controllers and other system modes. Responses of coordinated PSS and IPFC SFLA-based supplementary controllers include higher peak amplitude and longer settling time compared with coordinated IPFC and PSS ICA-based controllers. This comparison shows that overshoots, undershoots and the settling times are reduced considerably in coordinated mode of IPFC based controller and PSS using ICA. Analysis of the system performance shows that the proposed method has excellent response to different faults in power system. 展开更多
关键词 interline power flow controller(IPFC) controller imperialist competitive optimization algorithm power system stabilizer(PSS)
在线阅读 下载PDF
Design and application of electric oil pump in automatic transmission for efficiency improvement and start–stop function 被引量:1
17
作者 刘艳芳 董鹏 +1 位作者 刘洋 徐向阳 《Journal of Central South University》 SCIE EI CAS CSCD 2016年第3期570-580,共11页
For the purpose of improving efficiency and realizing start–stop function, an electric oil pump(EOP) is integrated into an 8-speed automatic transmission(AT). A mathematical model is built to calculate the transmissi... For the purpose of improving efficiency and realizing start–stop function, an electric oil pump(EOP) is integrated into an 8-speed automatic transmission(AT). A mathematical model is built to calculate the transmission power loss and the hydraulic system leakage. Based on this model, a flow-based control strategy is developed for EOP to satisfy the system flow requirement. This control strategy is verified through the forward driving simulation. The results indicate that there is a best combination for the size of mechanical oil pump(MOP) and EOP in terms of minimum energy consumption. In order to get a quick and smooth starting process, control strategies of the EOP and the on-coming clutch are proposed. The test environment on a prototype vehicle is built to verify the feasibility of the integrated EOP and its control strategies. The results show that the selected EOP can satisfy the flow requirement and a quick and smooth starting performance is achieved in the start–stop function. This research has a high value for the forward design of EOP in automatic transmissions with respect to efficiency improvement and start–stop function. 展开更多
关键词 automatic transmission electric oil pump mechanical oil pump start-stop function efficiency improvement forwarddriving simulation control strategy
在线阅读 下载PDF
Design of an 8 bit differential paired eFuse OTP memory IP reducing sensing resistance 被引量:1
18
作者 JANG Ji-Hye 金丽妍 +3 位作者 JEON Hwang-Gon KIM Kwang-Il HA Pan-Bong KIM Young-Hee 《Journal of Central South University》 SCIE EI CAS 2012年第1期168-173,共6页
For the conventional single-ended eFuse cell, sensing failures can occur due to a variation of a post-program eFuse resistance during the data retention time and a relatively high program resistance of several kilo oh... For the conventional single-ended eFuse cell, sensing failures can occur due to a variation of a post-program eFuse resistance during the data retention time and a relatively high program resistance of several kilo ohms. A differential paired eFuse cell is designed which is about half the size smaller in sensing resistance of a programmed eFuse link than the conventional single-ended eFuse cell. Also, a sensing circuit of sense amplifier is proposed, based on D flip-flop structure to implement a simple sensing circuit. Furthermore, a sensing margin test circuit is proposed with variable pull-up loads out of consideration for resistance variation of a programmed eFuse. When an 8 bit eFuse OTP IP is designed with 0.18 ~tm standard CMOS logic of TSMC, the layout dimensions are 229.04 μm ×100.15μm. All the chips function successfully when 20 test chips are tested with a program voltage of 4.2 V. 展开更多
关键词 eFuse differential paired efuse cell one time programmable memory sensing resistance D flip-flop based sense amplifier
在线阅读 下载PDF
Design of hybrid damping controller based on multi-target gravitational search optimization algorithm in a multi-machine power system with high penetration of PV park 被引量:1
19
作者 Y.Hashemi H.Shayeghi +1 位作者 M.Moradzadeh A.Safari 《Journal of Central South University》 SCIE EI CAS CSCD 2016年第5期1163-1175,共13页
A mathematical approach was proposed to investigate the impact of high penetration of large-scale photovoltaic park(LPP) on small-signal stability of a power network and design of hybrid controller for these units.A s... A mathematical approach was proposed to investigate the impact of high penetration of large-scale photovoltaic park(LPP) on small-signal stability of a power network and design of hybrid controller for these units.A systematic procedure was performed to obtain the complete model of a multi-machine power network including LPP.For damping of oscillations focusing on inter-area oscillatory modes,a hybrid controller for LPP was proposed.The performance of the suggested controller was tested using a 16-machine 5-area network.The results indicate that the proposed hybrid controller for LPP provides sufficient damping to the low-frequency modes of power system for a wide range of operating conditions.The method presented in this work effectively indentifies the impact of increased PV penetration and its controller on dynamic performance of multi-machine power network containing LPP.Simulation results demonstrate that the model presented can be used in designing of essential controllers for LPP. 展开更多
关键词 hybrid controller multi-objective optimization large-scale photovoltaic park small-signal scrutiny
在线阅读 下载PDF
Designing and implementation of variance-dependent Goldstein radar interferogram filtering 被引量:1
20
作者 王琪洁 张小虎 +1 位作者 朱建军 胡俊 《Journal of Central South University》 SCIE EI CAS 2014年第8期3295-3301,共7页
The variance-dependent Goldstein radar interferogram filter takes into account the information of both interferometric coherence and multilook factors,and can produce very consistent results for interferograms generat... The variance-dependent Goldstein radar interferogram filter takes into account the information of both interferometric coherence and multilook factors,and can produce very consistent results for interferograms generated under a wide variety of multilook factors and with very different noise level.However,the filter is a bit complicated and its application is still very limited.We present the designing and implementation of the variance-dependent Goldstein radar interferogram filtering,emphasizing on the logic flow,the generation of look-up table,the determination of filtering parameter,and the handling of edge information loss.Experiments with real interferograms are provided to demonstrate the applications of the designed filtering.Comparisons with the result of the coherence-dependent Goldstein filter show that improvements from 18.4% to 36.9% are achieved when the variance-dependent filter is used,and the noisier the interferogram,the greater the improvement. 展开更多
关键词 synthetic aperture radar interferometry (InSAR) Goldstein filter variance-dependent radar COHERENCE multilook factor
在线阅读 下载PDF
上一页 1 2 下一页 到第
使用帮助 返回顶部