期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
冲击压缩下玻璃样品后自由表面速度的过冲现象 被引量:2
1
作者 赵剑衡 孙承纬 +3 位作者 赵峰 文尚刚 刘仓理 段祝平 《爆炸与冲击》 EI CAS CSCD 北大核心 2002年第1期72-78,共7页
实验发现当飞片碰撞玻璃样品产生的冲击载荷超过一定值后 ,玻璃样品后自由表面速度时程曲线上有“过冲现象” ,即速度上升到最大值后 ,立即开始下降 ,其时间的开始部分类似于三角波。通过高速摄影和VISAR等测试手段对这一现象进行了较... 实验发现当飞片碰撞玻璃样品产生的冲击载荷超过一定值后 ,玻璃样品后自由表面速度时程曲线上有“过冲现象” ,即速度上升到最大值后 ,立即开始下降 ,其时间的开始部分类似于三角波。通过高速摄影和VISAR等测试手段对这一现象进行了较系统的研究 ,发现其与玻璃样品后自由表面附近的破碎有关 ,建立了描述这一破坏现象的损伤演化方程 ,并进行了数值模拟。计算结果和实验结果吻合 ,表明对这个现象的解释是合理的。 展开更多
关键词 过冲现象 冲击波 破坏波 冲击压缩 玻璃样品 后自由表面速度 高速摄影 数值模拟
在线阅读 下载PDF
碱硅酸盐玻璃的电导率
2
作者 R.M.Hakim D.R.Vhlmann 宋学芬 《应用光学》 CAS CSCD 1990年第1期43-46,56,共5页
在Na<sub>2</sub>O-SiO<sub>2</sub>、K<sub>2</sub>O-SiO<sub>2</sub>和Cs<sub>2</sub>O-SiO<sub>2</sub>系统中,已在一定的温度和组成范围内测定过玻璃的... 在Na<sub>2</sub>O-SiO<sub>2</sub>、K<sub>2</sub>O-SiO<sub>2</sub>和Cs<sub>2</sub>O-SiO<sub>2</sub>系统中,已在一定的温度和组成范围内测定过玻璃的电导率。均质的Cs<sub>2</sub>O-SiO<sub>2</sub>和K<sub>2</sub>O-SiO<sub>2</sub>玻璃的激活能随着玻璃的成份不同而变化,并且,由于Na<sub>2</sub>O-SiO<sub>2</sub>玻璃分相作用的影响使其发生不连续的变化。在简单的碱硅酸盐玻璃中,早已发现等温的电导率总是随着碱浓度的增大而增高。电导激活能与成分的关系曲线形式还不太清楚。在某些情况下,根据在各个成分下记录下来的折断点,可用不同斜率的直线描述上述关系; 展开更多
关键词 硅酸盐玻璃 玻璃分相 激活能 玻璃转变温度 碱浓度 玻璃样品 不连续 曲线形式 玻璃 加料量
在线阅读 下载PDF
光学材料 光学玻璃
3
《中国光学》 CAS 2005年第3期84-86,共3页
TQ171.11 2005032247 Ag-Cu离子注入玻璃后不同气氛退火的光吸收研究=Op- tical absorption of nanoclusters by sequentially implanting into SiO2 glass and subsequently annealing in a selected at- mosphere[刊,中]/张丽(武汉... TQ171.11 2005032247 Ag-Cu离子注入玻璃后不同气氛退火的光吸收研究=Op- tical absorption of nanoclusters by sequentially implanting into SiO2 glass and subsequently annealing in a selected at- mosphere[刊,中]/张丽(武汉大学物理科学与技术学院. 湖北,武汉(430072)),蒋昌忠…∥物理学报.-2004,53 (9).-2910-2914 采用MEVVA(metal vapot vacuum arc ion source)引 出的强束流脉冲Ag,Cu离子先后注入到SiO2玻璃,X射 线光电子能谱仪(XPS)分析显示Ag,Cu大多仍为金属态, 展开更多
关键词 硅酸盐玻璃 长余辉发光玻璃 玻璃样品 光学玻璃 成核生长 热处理 钨酸盐 发射光谱 摩尔分数 荧光
在线阅读 下载PDF
光学材料
4
《中国光学与应用光学》 2007年第2期87-93,共7页
关键词 光子晶体薄膜 Eu 配合物 ZnO 晶体表面 量子电子学报 纳米晶 稀土高氯酸盐 武汉大学物理科学与技术学院 一维光子晶体 受激发射截面 玻璃样品 最佳晶体长度 点缺陷 晶体缺陷 纳米线 纳米结构 电子显微学 纳米棒 光学材料
在线阅读 下载PDF
Melting, sintering and wetting properties of ZnO–Bi_2O_3–B_2O_3 sealing glass 被引量:4
5
作者 何峰 何子君 +2 位作者 谢峻林 梅书霞 金明芳 《Journal of Central South University》 SCIE EI CAS CSCD 2016年第7期1541-1547,共7页
Glasses based on ZnO-Bi_2O_3-B_2O_3 system are expected to be a new kind of sealing glasses because of their low melting temperature and other properties.In order to reveal the effect of B_2O_3 on the rheological beha... Glasses based on ZnO-Bi_2O_3-B_2O_3 system are expected to be a new kind of sealing glasses because of their low melting temperature and other properties.In order to reveal the effect of B_2O_3 on the rheological behavior of ZnO-Bi_2O_3-B_2O_3 system glass melt,the properties of viscosity,thermal expansion,fluxion property and wetting process between cylinder samples and stainless steel were investigated with the rotating crucible viscometer,dilato meter and high-temperature microscope.The structure of sintered glass samples was investigated with scanning electron microscope.The results show that the B_2O_3 content increasing in B_1-B_3 at the given temperature between 400 ℃ and 500 ℃ leads to the increasing of the sample viscosity.When the amount of B_2O_3 increases from 5.24%to 9.24%(mass fraction),the coefficients of thermal expansion of glass samples decrease smoothly from 10.94×10^(-6) to10.71×10^(-6) and 10.38×10^(-6) ℃^(-1) respectively.In the case of sealing temperature,its value increases from 453 ℃ to 494 ℃.ZnO-Bi_2O_3-B_2O_3 system low-melting glass powder sintering was with viscous liquid to participate,which could make the densification of glass sample more effective and more efficient.With the content of B_2O_3 increasing,the wetting angle between the glasses samples and stainless steel could also increase,and the resulting appropriate sealing temperature range is 460-490 ℃. 展开更多
关键词 sintering Bi2O3 Melting wetting sealing glasses melting stainless rheological viscosity
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部