This work proposed a strategy to improve the caking index of polyethylene terephthalate(PET)waste,in which low-temperature pyrolysis treatment(LTPT)was used to depolymerize PET waste.The mechanism of G modification wa...This work proposed a strategy to improve the caking index of polyethylene terephthalate(PET)waste,in which low-temperature pyrolysis treatment(LTPT)was used to depolymerize PET waste.The mechanism of G modification was revealed combining thermogravimetric(TG)analysis,Fourier transform infrared spectroscopy,pyrolysis-gas chromatography with mass spectrometric detection,and solid-state 13C nuclear magnetic resonance spectroscopy.Furthermore,crucible coking experiments were also conducted using industrial coal mixture and treated PET with the optimum G(PET300)or raw PET to evaluate the applicability of PET waste in coal-blending coking.According to characterization results of coke reactivity(CR),coke strength after reaction(CSR)indices,TG-related curves,pore volumes,and Raman spectra of the resultant cokes,LTPT could greatly increase the G of PET,and the optimum temperature was 300℃.Specifically,compared with the coke obtained from the blend with PET,the CR of the coke produced from the blend with PET300 decreased by 4.9%,whereas the CSR of the increased by 7.4%,suggesting that LTPT could increase the proportion of PET used for coal-blending coking.The improvement in G is attributed to the changes in C-O/C=O ratio,aliphatic H and aromaticity caused by LTPT.展开更多
Process control is an effective approach to reduce the NO_(x) emission from sintering flue gas.The effects of different materials adhered on coke breeze on NO_(x) emission characteristics and sintering performance wer...Process control is an effective approach to reduce the NO_(x) emission from sintering flue gas.The effects of different materials adhered on coke breeze on NO_(x) emission characteristics and sintering performance were studied.Results showed that the coke breeze adhered with the mixture of CaO and Fe_(2)O_(3) or calcium ferrite significantly lowers the NO_(x) emission concentration and conversion ratio of fuel-N to NO_(x).Pretreating the coke with the mixture of lime slurry and iron ore fines helped to improve the granulation effect,and optimize the carbon distribution in granules.When the mass ratio of coke breeze,quick lime,water and iron ore fines was 2:1:1:1,the average NO_(x) emission concentration was decreased from 220 mg/m^(3) to 166 mg/m^(3),and the conversion ratio of fuel-N was reduced from 54.2%to 40.9%.展开更多
基金supported by the National Natural Science Foundation of China(22308006,22278001)the Natural Science Foundation of Anhui Provincial Education Department(KJ2021A0407).
文摘This work proposed a strategy to improve the caking index of polyethylene terephthalate(PET)waste,in which low-temperature pyrolysis treatment(LTPT)was used to depolymerize PET waste.The mechanism of G modification was revealed combining thermogravimetric(TG)analysis,Fourier transform infrared spectroscopy,pyrolysis-gas chromatography with mass spectrometric detection,and solid-state 13C nuclear magnetic resonance spectroscopy.Furthermore,crucible coking experiments were also conducted using industrial coal mixture and treated PET with the optimum G(PET300)or raw PET to evaluate the applicability of PET waste in coal-blending coking.According to characterization results of coke reactivity(CR),coke strength after reaction(CSR)indices,TG-related curves,pore volumes,and Raman spectra of the resultant cokes,LTPT could greatly increase the G of PET,and the optimum temperature was 300℃.Specifically,compared with the coke obtained from the blend with PET,the CR of the coke produced from the blend with PET300 decreased by 4.9%,whereas the CSR of the increased by 7.4%,suggesting that LTPT could increase the proportion of PET used for coal-blending coking.The improvement in G is attributed to the changes in C-O/C=O ratio,aliphatic H and aromaticity caused by LTPT.
基金Project(2017YFC0210302)supported by the National Key R&D Program of ChinaProjects(U1660206,U1760107)supported by the National Natural Science Foundation of China
文摘Process control is an effective approach to reduce the NO_(x) emission from sintering flue gas.The effects of different materials adhered on coke breeze on NO_(x) emission characteristics and sintering performance were studied.Results showed that the coke breeze adhered with the mixture of CaO and Fe_(2)O_(3) or calcium ferrite significantly lowers the NO_(x) emission concentration and conversion ratio of fuel-N to NO_(x).Pretreating the coke with the mixture of lime slurry and iron ore fines helped to improve the granulation effect,and optimize the carbon distribution in granules.When the mass ratio of coke breeze,quick lime,water and iron ore fines was 2:1:1:1,the average NO_(x) emission concentration was decreased from 220 mg/m^(3) to 166 mg/m^(3),and the conversion ratio of fuel-N was reduced from 54.2%to 40.9%.
