期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
含能材料热分解动力学求解及热安全性理论评估的进展 被引量:8
1
作者 李陈 马凤国 +3 位作者 睢贺良 于谦 银颖 孙杰 《含能材料》 EI CAS CSCD 北大核心 2020年第8期798-809,共12页
近年,热分解动力学评价含能材料热安全性的方法受到了广泛的关注,并逐渐发展成为传统实验方法的重要补充。综述了以热分解动力学为基础的模拟方法评估热安全性的研究进展,介绍了获得热分解动力学参数的三种方法,包括简单线性拟合法、等... 近年,热分解动力学评价含能材料热安全性的方法受到了广泛的关注,并逐渐发展成为传统实验方法的重要补充。综述了以热分解动力学为基础的模拟方法评估热安全性的研究进展,介绍了获得热分解动力学参数的三种方法,包括简单线性拟合法、等转化率法和基于反应机理函数的动力学参数求解方法,讨论了不同求解方法的适用条件,并重点分析了模型拟合法的建模过程及其特点;在此基础上,结合热安全性评估中几种重要的安全性参数,介绍了基于热分解动力学对含能材料及其他危险物热安全进行评价的实际应用;最后对该方法中仍存在的争议性问题,如热分解参数求解的具体选择(等转化率法或模型拟合法)、以及针对熔融分解反应的实验方案实施等进行了讨论,提出在未来研究中应更加重视样品状态、实验技术、评价目标之间的匹配性。 展开更多
关键词 含能材料 热分解动力学模型 热安全性 理论评估方法
在线阅读 下载PDF
三聚氰胺氰脲酸阻燃尼龙66热降解行为及动力学 被引量:14
2
作者 罗典 范敬辉 +1 位作者 黄浩 刘渊 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2019年第6期35-39,共5页
在对三聚氰胺氰脲酸(MCA)阻燃尼龙66(PA66)热降解及热释放行为分析基础上,采用包括Kissinger和Horowitz-Metzger2种数学模型对其热降解动力学进行研究,通过热重分析(TG)、微型燃烧量热(MCC)揭示MCA与PA66的相互作用机理。结果表明,尽管... 在对三聚氰胺氰脲酸(MCA)阻燃尼龙66(PA66)热降解及热释放行为分析基础上,采用包括Kissinger和Horowitz-Metzger2种数学模型对其热降解动力学进行研究,通过热重分析(TG)、微型燃烧量热(MCC)揭示MCA与PA66的相互作用机理。结果表明,尽管不同数学模型获得的热降解活化能数值有较大差异,但MCA阻燃PA66与纯PA66相比均表现出前者活化能明显下降,由于MCA分解的三嗪化合物可与尼龙分子链氢键网络发生作用改变其电子云密度,促进其α和β-断链而形成低聚物及低分子挥发物,因此MCA会导致PA66分解温度前移,使其呈现两阶热分解特征。 展开更多
关键词 三聚氰胺氰脲酸 阻燃剂 尼龙66 热分解动力学模型
在线阅读 下载PDF
Experimental study on co-pyrolysis characteristics of typical medical waste compositions 被引量:6
3
作者 邓娜 崔文谦 +3 位作者 王维维 张强 张于峰 马洪亭 《Journal of Central South University》 SCIE EI CAS 2014年第12期4613-4622,共10页
Thermal decomposition of 21 kinds of binary mixtures between typical medical compositions was investigated under nitrogen conditions by dynamic thermogravimetric analysis(TGA) at 25–800 °C. The weighed sum metho... Thermal decomposition of 21 kinds of binary mixtures between typical medical compositions was investigated under nitrogen conditions by dynamic thermogravimetric analysis(TGA) at 25–800 °C. The weighed sum method(WSM) coupled with thermal analysis was applied to study the interaction between components. Then, co-pyrolysis kinetic model of the binary mixtures(tube for transfusion(TFT) and gauze) was established to verify the reliability of conclusions. The results show the follows. 1) Strong or weak interactions are shown between binary mixtures containing polyvinyl chloride(PVC), the main ingredient of TFT. The addition of other medical waste could enhance first stage decomposition of TFT. While, the secondary stage pyrolysis may be suppressed or enhanced or not affected by the addition. 2) There exists no interaction between catheter and other component, the DTG peak temperature representing Ca CO3 decomposition in catheter fraction is obviously lower than that of pure catheter; while,the shape of DTG peak keeps unchanged. 3) No evident reaction occurs between the other mix-samples, it is considered that their co-pyrolysis characteristics are linear superposition of mono-component pyrolysis characteristics. 展开更多
关键词 co-pyrolysis medical waste tube for transfusion(TFT) catheter interaction
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部