期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
基于F-K滑移流模型的柱面微槽气浮密封浮升能力分析 被引量:5
1
作者 陆俊杰 张炜 马浩 《化工学报》 EI CAS CSCD 北大核心 2021年第8期4267-4278,共12页
由于气浮密封薄膜引发的滑移流现象频发,本文针对一种新型柱面螺旋槽气浮密封,基于线性化Boltzmann方程(F-K模型),引入流量因子,建立稀薄气体润滑的F-K滑移流模型。采用高精度八点差分法和Newton-Raphson迭代法求解气膜压力,解决了表面... 由于气浮密封薄膜引发的滑移流现象频发,本文针对一种新型柱面螺旋槽气浮密封,基于线性化Boltzmann方程(F-K模型),引入流量因子,建立稀薄气体润滑的F-K滑移流模型。采用高精度八点差分法和Newton-Raphson迭代法求解气膜压力,解决了表面槽-台阶跃、径向偏心与极薄气膜三者耦合下对求解发散和计算精度的影响。将计算结果与现有研究对比,并考察了气体滑移流效应与运行参数的内在关联,研究结果验证了新型柱面螺旋槽气浮密封在高速、低压、小膜厚和大偏心下具有较为明显的滑移流效应;此外,虽然槽深、槽数和槽长的增加提高了气膜浮力,但是增强了槽内滑移流动的响应。研究结果为拓宽动压密封应用范围提供理论了基础。 展开更多
关键词 滑移流模型 螺旋槽 气膜 柱面密封 润滑性能
在线阅读 下载PDF
基于滑移流模型的微型箔片轴承倾斜性能研究 被引量:3
2
作者 宋国强 伍林 《组合机床与自动化加工技术》 北大核心 2019年第6期12-16,共5页
针对传统连续模型未考虑气流滑移效应的影响,而无法准确描述微小间隙下气膜压力分布的问题,在一阶滑移和Wu滑移速度边界条件基础上建立微型气体止推箔片轴承在倾斜状态下的修正雷诺方程,并使用有限体积法求解获得在不同倾斜角度、不同... 针对传统连续模型未考虑气流滑移效应的影响,而无法准确描述微小间隙下气膜压力分布的问题,在一阶滑移和Wu滑移速度边界条件基础上建立微型气体止推箔片轴承在倾斜状态下的修正雷诺方程,并使用有限体积法求解获得在不同倾斜角度、不同箔片变形柔度系数、不同转速和不同最小气膜间隙条件下的微型止推箔片轴承的气膜压力分布和轴向承载力,同时分析各种模型在不同结构参数下的差异。计算结果表明:微小间隙倾斜条件下气流滑移对轴承承载力影响较大。一阶滑移修正及Wu新滑移修正模型获得的承载力明显低于连续模型。模型间的结果偏差随倾斜角度、轴承转速和轴承最小间隙的减小而逐渐增大。因此连续模型已不适用于此条件下的分析,为得到更精确的精密磨削机床设备的参量特性,应使用更贴合实际的滑移修正模型进行计算。 展开更多
关键词 气体止推箔片轴承 滑移流模型 克努森数 止推盘倾斜 轴向承载力
在线阅读 下载PDF
Numerical simulation and analysis of solid-liquid two-phase threedimensional unsteady flow in centrifugal slurry pump 被引量:17
3
作者 吴波 汪西力 +1 位作者 LIU Hui 徐海良 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第8期3008-3016,共9页
Based on RNG k-ε turbulence model and sliding grid technique, solid-liquid two-phase three-dimensional(3-D) unsteady turbulence of full passage in slurry pump was simulated by means of Fluent software. The effects of... Based on RNG k-ε turbulence model and sliding grid technique, solid-liquid two-phase three-dimensional(3-D) unsteady turbulence of full passage in slurry pump was simulated by means of Fluent software. The effects of unsteady flow characteristics on solid-liquid two-phase flow and pump performance were researched under design condition. The results show that clocking effect has a significant influence on the flow in pump, and the fluctuation of flow velocity and pressure is obvious, particularly near the volute tongue, at the position of small sections of volute and within diffuser. Clocking effect has a more influence on liquid-phase than on solid-phase, and the wake-jet structure of relative velocity of solid-phase is less obvious than liquid-phase near the volute tongue and the impeller passage outlet. The fluctuation of relative velocity of solid-phase flow is 7.6% smaller than liquid-phase flow at the impeller outlet on circular path. Head and radial forces of the impeller are 8.1% and 85.7% of fluctuation, respectively. The results provide a theoretical basis for further research for turbulence, improving efficient, reducing the hydraulic losses and wear. Finally, field tests were carried out to verify the operation and wear of slurry pump. 展开更多
关键词 slurry pump solid-liquid two-phase flow unsteady flow 3-D full passage numerical simulation
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部