Nanoparticles are increasingly being used to improve the friction and wear performance of polymers. In this study, we investigated the tribological behavior and energy dissipation characteristics of nano-Al_2O_3-reinf...Nanoparticles are increasingly being used to improve the friction and wear performance of polymers. In this study, we investigated the tribological behavior and energy dissipation characteristics of nano-Al_2O_3-reinforced polytetrafluoroethylenepolyphenylene sulfide(PTFE-PPS) composites in a sliding system. The tribological behaviors of the composites were evaluated under different normal loads(100–300 N) at a high linear velocity(2 m/s) using a block-on-ring tester. Addition of the nano-Al_2O_3 filler improved the antiwear performance of the PTFE-PPS composites, and the friction coefficient increased slightly. The lowest wear rate was obtained when the nano-Al_2O_3 content was 3%(volume fraction). Further, the results indicated a linear correlation between wear and the amount of energy dissipated, even though the wear mechanism changed with the nano-Al_2O_3 content, independent of the normal load applied.展开更多
For the drum of hot rolling coiler is prone to be easily destroyed, the type of MMU-5G abrasion tester was applied to revealing the friction and wear behavior. The morphology observation by scanning electron microscop...For the drum of hot rolling coiler is prone to be easily destroyed, the type of MMU-5G abrasion tester was applied to revealing the friction and wear behavior. The morphology observation by scanning electron microscope (SEM) demonstrates the wear mechanism of the drum, and the test data of the influence coefficient of the normal pressure, relative sliding speed and surface lubrication conditions acted on the linear rate of the wear could be obtained by the regression method. A calculation model, which considers the factors of the structure of the drum, coiling tension and coiling strip specifications, was established by the combination method to predict the wear life of the drum. Then the practical production data was applied into this model and the analysis result was in good accordance with that of actual production.展开更多
基金Project(51165022)supported by the National Natural Science Foundation of ChinaProject(20122117)supported by the Lanzhou Science and Technology Bureau Foundation,ChinaProject(1310RJZA036)supported by the Natural Science Foundation of Gansu Province,China
文摘Nanoparticles are increasingly being used to improve the friction and wear performance of polymers. In this study, we investigated the tribological behavior and energy dissipation characteristics of nano-Al_2O_3-reinforced polytetrafluoroethylenepolyphenylene sulfide(PTFE-PPS) composites in a sliding system. The tribological behaviors of the composites were evaluated under different normal loads(100–300 N) at a high linear velocity(2 m/s) using a block-on-ring tester. Addition of the nano-Al_2O_3 filler improved the antiwear performance of the PTFE-PPS composites, and the friction coefficient increased slightly. The lowest wear rate was obtained when the nano-Al_2O_3 content was 3%(volume fraction). Further, the results indicated a linear correlation between wear and the amount of energy dissipated, even though the wear mechanism changed with the nano-Al_2O_3 content, independent of the normal load applied.
基金Project(2009AA04Z143) supported by the National High Technology Research and Development Program of ChinaProject(E2006001038) supported by the Major Program of the Natural Science Foundation of Hebei Province, China
文摘For the drum of hot rolling coiler is prone to be easily destroyed, the type of MMU-5G abrasion tester was applied to revealing the friction and wear behavior. The morphology observation by scanning electron microscope (SEM) demonstrates the wear mechanism of the drum, and the test data of the influence coefficient of the normal pressure, relative sliding speed and surface lubrication conditions acted on the linear rate of the wear could be obtained by the regression method. A calculation model, which considers the factors of the structure of the drum, coiling tension and coiling strip specifications, was established by the combination method to predict the wear life of the drum. Then the practical production data was applied into this model and the analysis result was in good accordance with that of actual production.
