Two-dimensional images of the granular ore media with different grain sizes were obtained from the X-ray computed tomography.Combined with the digital image processing and finite element techniques,the original graysc...Two-dimensional images of the granular ore media with different grain sizes were obtained from the X-ray computed tomography.Combined with the digital image processing and finite element techniques,the original grayscale images were transformed into the finite element models directly.By using these models,the simulations of pore scale fluid flow among particles were conducted with the COMSOL Multiphysics,and the distribution characteristics of fluid flow velocity and pressure were analyzed.The simulation results show that there exist obvious preferential flow and leaching blind zone in each granular medium.The flow velocity at pore throat is larger than that of pore body and the largest velocity reaches 0.22 m/s.The velocity decreases gradually from the center of pore throat and body to the surface of particles.The flow paths of granular media with larger grain size distribute equally,while the fluid flow velocities in most of areas of granular media with smaller grain size are lower,and some of them approach to zero,so the permeability is very low.There exist some pore clusters with different pressures,which is the basic reason for the uneven flow velocity distribution.展开更多
According to the recently developed single-trough floating machine with the world's largest volume(inflatable mechanical agitation flotation machine with volume of 320 m3) in China, the gas-fluid two-phase flow in...According to the recently developed single-trough floating machine with the world's largest volume(inflatable mechanical agitation flotation machine with volume of 320 m3) in China, the gas-fluid two-phase flow in flotation cell was simulated using computational fluid dynamics method. It is shown that hexahedral mesh scheme is more suitable for the complex structure of the flotation cell than tetrahedral mesh scheme, and a mesh quality ranging from 0.7 to 1.0 is obtained. Comparative studies of the standard k-ε, k-ω and realizable k-ε turbulence models were carried out. It is indicated that the standard k-ε turbulence model could give a result relatively close to the practice and the liquid phase flow field is well characterized. In addition, two obvious recirculation zones are formed in the mixing zones, and the pressure on the rotor and stator is well characterized. Furthermore, the simulation results using improved standard k-ε turbulence model show that surface tension coefficient of 0.072, drag model of Grace and coefficient of 4, and lift coefficient of 0.001 can be achieved. The research results suggest that gas-fluid two-phase flow in large flotation cell can be well simulated using computational fluid dynamics method.展开更多
A model for liquid-gas flow （MLGF）, considering the flee movement of liquid surface, was built to simulate the wastewater velocity field and gas distribution in a full-scale Caroussel oxidation ditch with surface ae...A model for liquid-gas flow （MLGF）, considering the flee movement of liquid surface, was built to simulate the wastewater velocity field and gas distribution in a full-scale Caroussel oxidation ditch with surface aeration. It was calibrated and validated by field measurement data, and the calibrated parameters and sections were selected based on both model analysis and numerical computation. The simulated velocities of MLGF were compared to that of a model for wastewater-sludge flow （MWSF）. The results show that the free liquid surface considered in MLGF improves the simulated velocity results of upper layer and surface. Moreover, distribution of gas volume fraction （GVF） simulated by MLGF was compared to dissolved oxygen （DO） measured in the oxidation ditch. It is shown that DO distribution is affected by many factors besides GVF distribution.展开更多
基金Projects(50934002,51074013) supported by the National Natural Science Foundation of China
文摘Two-dimensional images of the granular ore media with different grain sizes were obtained from the X-ray computed tomography.Combined with the digital image processing and finite element techniques,the original grayscale images were transformed into the finite element models directly.By using these models,the simulations of pore scale fluid flow among particles were conducted with the COMSOL Multiphysics,and the distribution characteristics of fluid flow velocity and pressure were analyzed.The simulation results show that there exist obvious preferential flow and leaching blind zone in each granular medium.The flow velocity at pore throat is larger than that of pore body and the largest velocity reaches 0.22 m/s.The velocity decreases gradually from the center of pore throat and body to the surface of particles.The flow paths of granular media with larger grain size distribute equally,while the fluid flow velocities in most of areas of granular media with smaller grain size are lower,and some of them approach to zero,so the permeability is very low.There exist some pore clusters with different pressures,which is the basic reason for the uneven flow velocity distribution.
基金Project(51074027)supported by the National Natural Science Foundation of China
文摘According to the recently developed single-trough floating machine with the world's largest volume(inflatable mechanical agitation flotation machine with volume of 320 m3) in China, the gas-fluid two-phase flow in flotation cell was simulated using computational fluid dynamics method. It is shown that hexahedral mesh scheme is more suitable for the complex structure of the flotation cell than tetrahedral mesh scheme, and a mesh quality ranging from 0.7 to 1.0 is obtained. Comparative studies of the standard k-ε, k-ω and realizable k-ε turbulence models were carried out. It is indicated that the standard k-ε turbulence model could give a result relatively close to the practice and the liquid phase flow field is well characterized. In addition, two obvious recirculation zones are formed in the mixing zones, and the pressure on the rotor and stator is well characterized. Furthermore, the simulation results using improved standard k-ε turbulence model show that surface tension coefficient of 0.072, drag model of Grace and coefficient of 4, and lift coefficient of 0.001 can be achieved. The research results suggest that gas-fluid two-phase flow in large flotation cell can be well simulated using computational fluid dynamics method.
基金Project supported by Visiting Scholar Foundation of Key Laboratory of the Resources Exploitation and Environmental Disaster Control Engineering in Southwest China (Chongqing University),Ministry of Education,China
文摘A model for liquid-gas flow （MLGF）, considering the flee movement of liquid surface, was built to simulate the wastewater velocity field and gas distribution in a full-scale Caroussel oxidation ditch with surface aeration. It was calibrated and validated by field measurement data, and the calibrated parameters and sections were selected based on both model analysis and numerical computation. The simulated velocities of MLGF were compared to that of a model for wastewater-sludge flow （MWSF）. The results show that the free liquid surface considered in MLGF improves the simulated velocity results of upper layer and surface. Moreover, distribution of gas volume fraction （GVF） simulated by MLGF was compared to dissolved oxygen （DO） measured in the oxidation ditch. It is shown that DO distribution is affected by many factors besides GVF distribution.
