A novel type of metal oxide/activated carbon catalyst was prepared by sol-gel method for the hydrolysis of carbonyl sulfide （COS）. The influences of the calcination temperature, additive content （2.5%-10.0% Fe2O3, ...A novel type of metal oxide/activated carbon catalyst was prepared by sol-gel method for the hydrolysis of carbonyl sulfide （COS）. The influences of the calcination temperature, additive content （2.5%-10.0% Fe2O3, mass fraction） and the basic density of the activation process were thoroughly investigated. The surface of catalysts was characterized by Boehm titration. The products were characterized by scanning electron microscopy （SEM）, X-ray diffractometry （XRD） and X-ray photoelectron spectroscopy （XPS）. The results show that catalysts with 2.5%-5.0% Fe2O3 after calcining at 500 ℃ have superior activity. The conversion rate of COS increases with increasing the relative density of basic capacity loaded onto activated carbon（AC）, and the activity follows the order： KOH〉Na2CO3 〉NaHCO3. Boehm titration data clearly show that the total acidity increases （from 0.06 to 0.48 mmol/g） and the basic groups decrease （from 0.78 to 0.56 mmol/g） after COS hydrolysis and H2S adsorption. The XPS results show that the product of HzS may be absorbed by the interaction with metal compounds and 02 to form sulfate （171.28 eV） and element sulfur （164.44 eV）, which lead to catalysts poisoning.展开更多
The aim of this work was to investigate the effect of different surfactants on the removal efficiency of heavy metals in sewage sludge treated by a method combining bio-acidification with Fenton oxidation. Four surfac...The aim of this work was to investigate the effect of different surfactants on the removal efficiency of heavy metals in sewage sludge treated by a method combining bio-acidification with Fenton oxidation. Four surfactants were adopted such as anionic surfactant(sodium dodecyl benzene sulfonate, SDBS), nonionic surfactants(tween-20 and tween-60) and cationic surfactant(hexadecyl trimethyl ammonium chloride, HTAC), respectively. The indigenous sulfur-oxidizing bacteria in bio-acidification phase were enriched and cultured from fresh activated sludge obtained from a wastewater treatment plant. It is shown that different surfactants exhibited distinct effect on the removal efficiency of heavy metals from sewage sludge. The nonionic surfactants,especially tween-60, promotes the solubilization of heavy metals, while the anionic and cationic surfactants hinder the removal of heavy metals. Copper is efficiently leached. The removal efficiency of cadium is relatively lower than that of Cu due to the demand for rigorous p H value. Lead is leached with a low efficiency as the formation of low soluble Pb SO4 precipitates.展开更多
基金Project(50908110) supported by the National Natural Science Foundation of ChinaProject(2008AA062602) supported by the National High-Tech Research and Development Program of China+1 种基金Project(20090451431) supported by China Postdoctoral Science FoundationProject(2007PY01-10) supported by Young and Middle-aged Academic and Technical Back-up Personnel Program of Yunnan Province,China
文摘A novel type of metal oxide/activated carbon catalyst was prepared by sol-gel method for the hydrolysis of carbonyl sulfide （COS）. The influences of the calcination temperature, additive content （2.5%-10.0% Fe2O3, mass fraction） and the basic density of the activation process were thoroughly investigated. The surface of catalysts was characterized by Boehm titration. The products were characterized by scanning electron microscopy （SEM）, X-ray diffractometry （XRD） and X-ray photoelectron spectroscopy （XPS）. The results show that catalysts with 2.5%-5.0% Fe2O3 after calcining at 500 ℃ have superior activity. The conversion rate of COS increases with increasing the relative density of basic capacity loaded onto activated carbon（AC）, and the activity follows the order： KOH〉Na2CO3 〉NaHCO3. Boehm titration data clearly show that the total acidity increases （from 0.06 to 0.48 mmol/g） and the basic groups decrease （from 0.78 to 0.56 mmol/g） after COS hydrolysis and H2S adsorption. The XPS results show that the product of HzS may be absorbed by the interaction with metal compounds and 02 to form sulfate （171.28 eV） and element sulfur （164.44 eV）, which lead to catalysts poisoning.
基金Project(21276069)supported by the National Natural Science Foundation of ChinaProject(CX2012B139)supported by the Hunan Province Innovation Foundation for Postgraduate,China
文摘The aim of this work was to investigate the effect of different surfactants on the removal efficiency of heavy metals in sewage sludge treated by a method combining bio-acidification with Fenton oxidation. Four surfactants were adopted such as anionic surfactant(sodium dodecyl benzene sulfonate, SDBS), nonionic surfactants(tween-20 and tween-60) and cationic surfactant(hexadecyl trimethyl ammonium chloride, HTAC), respectively. The indigenous sulfur-oxidizing bacteria in bio-acidification phase were enriched and cultured from fresh activated sludge obtained from a wastewater treatment plant. It is shown that different surfactants exhibited distinct effect on the removal efficiency of heavy metals from sewage sludge. The nonionic surfactants,especially tween-60, promotes the solubilization of heavy metals, while the anionic and cationic surfactants hinder the removal of heavy metals. Copper is efficiently leached. The removal efficiency of cadium is relatively lower than that of Cu due to the demand for rigorous p H value. Lead is leached with a low efficiency as the formation of low soluble Pb SO4 precipitates.
