A series of granular activated carbons （GACs） were prepared by briquetting method from Chinese coals of different ranks and their blends, with coal pitch as the binder. Pore structural parameters including BET speci...A series of granular activated carbons （GACs） were prepared by briquetting method from Chinese coals of different ranks and their blends, with coal pitch as the binder. Pore structural parameters including BET specific surface area （SBEr）, total pore volume （Vr） and average pore diameter （da） were measured and cal- culated as well as process parameters such as yield of char （CY） and burn-off （B）. The relationship between the pore structural parameters of the GAC from coal blend （BC-GAC） and the ones of the GACs from corresponding single coals （SC-GACs） was analyzed, in which an index, the relative error （δ）, was presented to define the bias between fitted values and experimental values of these parameters of the BC-GACs. The results show that the BC-GAC keeps qualitatively the pore structural features of the SC-GACs; as concerned as the quantitative relationship, the pore structural parameters of the BC-GAC from coal blend consisting of non-caking coals can be obtained by adding proportionally the pore structural parameters of the SC-GACs with a less than 10%. Meanwhile, for the BC-GAC from coal blend containing weak caking bituminous coal, the δ increases up to 25% and the experimental pore size distribution differs greatly from the fitted one.展开更多
The paraffin wax microemulsion was prepared from fully refined paraffin wax No.58-60 in the presence of a nonionic surfactant and an anionic surfactant.The influence of manufacturing parameters on the particle diamete...The paraffin wax microemulsion was prepared from fully refined paraffin wax No.58-60 in the presence of a nonionic surfactant and an anionic surfactant.The influence of manufacturing parameters on the particle diameter of paraffin wax microemulsion included the quantity of the emulsifier,the temperature and emulsification time,the stirring speed,the pH value and the auxiliary ingredient(cosurfactant).The test results showed that the temperature of emulsification had little effect on the particle size of paraffin wax microemulsion in a temperature range of 75-85 ℃.Other manufacturing parameters all had a great effect on the particle size of paraffin wax microemulsion.The optimum preparation conditions included:a w(emulsifier) of 6%,an emulsification temperature of 80 ℃,an emulsification time of 40 min,a pH value of about 8,and a stirring speed of 600 r/min,with n-amyl alcohol serving as the co-surfactant.Under these conditions,a translucent and baby blue paraffin wax emulsion was prepared with its particle size equating to 97 nm.展开更多
基金financially supported by the National High-Tech Research and Development Program of China (No.2008AA05Z308)the National Natural Science Foundation of China (No.20776150)
文摘A series of granular activated carbons （GACs） were prepared by briquetting method from Chinese coals of different ranks and their blends, with coal pitch as the binder. Pore structural parameters including BET specific surface area （SBEr）, total pore volume （Vr） and average pore diameter （da） were measured and cal- culated as well as process parameters such as yield of char （CY） and burn-off （B）. The relationship between the pore structural parameters of the GAC from coal blend （BC-GAC） and the ones of the GACs from corresponding single coals （SC-GACs） was analyzed, in which an index, the relative error （δ）, was presented to define the bias between fitted values and experimental values of these parameters of the BC-GACs. The results show that the BC-GAC keeps qualitatively the pore structural features of the SC-GACs; as concerned as the quantitative relationship, the pore structural parameters of the BC-GAC from coal blend consisting of non-caking coals can be obtained by adding proportionally the pore structural parameters of the SC-GACs with a less than 10%. Meanwhile, for the BC-GAC from coal blend containing weak caking bituminous coal, the δ increases up to 25% and the experimental pore size distribution differs greatly from the fitted one.
基金supported by The National Natural Science Funds (Project No. 21076025)
文摘The paraffin wax microemulsion was prepared from fully refined paraffin wax No.58-60 in the presence of a nonionic surfactant and an anionic surfactant.The influence of manufacturing parameters on the particle diameter of paraffin wax microemulsion included the quantity of the emulsifier,the temperature and emulsification time,the stirring speed,the pH value and the auxiliary ingredient(cosurfactant).The test results showed that the temperature of emulsification had little effect on the particle size of paraffin wax microemulsion in a temperature range of 75-85 ℃.Other manufacturing parameters all had a great effect on the particle size of paraffin wax microemulsion.The optimum preparation conditions included:a w(emulsifier) of 6%,an emulsification temperature of 80 ℃,an emulsification time of 40 min,a pH value of about 8,and a stirring speed of 600 r/min,with n-amyl alcohol serving as the co-surfactant.Under these conditions,a translucent and baby blue paraffin wax emulsion was prepared with its particle size equating to 97 nm.
