期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
AD型喷油泵系统喷射过程理论模型仿真研究 被引量:1
1
作者 毛范海 周东清 +1 位作者 宇培源 万祖基 《哈尔滨工业大学学报》 EI CAS CSCD 北大核心 2003年第11期1395-1398,共4页
为了缩短柱塞式燃油喷射系统产品研制开发周期,提出了引入修正系数的AD型喷油泵系统喷射过程理论模型计算机建模的研究方法.通过计算机建模、优化求解修正系数以及对修正系数优化结果的线性回归分析,建立了修正系数的线性回归方程,完成... 为了缩短柱塞式燃油喷射系统产品研制开发周期,提出了引入修正系数的AD型喷油泵系统喷射过程理论模型计算机建模的研究方法.通过计算机建模、优化求解修正系数以及对修正系数优化结果的线性回归分析,建立了修正系数的线性回归方程,完成了该系统修正后的喷射过程理论模型建模.仿真预测与检验表明,其预测结果与实测值吻合,可应用于诸如P7型等柱塞式喷油泵系统喷射过程的理论模型研究. 展开更多
关键词 AD型喷油泵系统 线性回归分析 柴油机 修正系数 喷油器
在线阅读 下载PDF
油船大型货油泵系统现状及发展趋势 被引量:11
2
作者 吴震宇 汤敏 《船海工程》 2012年第4期129-132,共4页
介绍国内外货油泵系统发展现状,并通过对比分析指出该产品今后的发展趋势。认为我国船舶配套企业应抓住机遇,开展大型货油泵系统设计与集成技术研究,以提高国际竟争能力。
关键词 油船 油泵系统 现状 发展趋势
在线阅读 下载PDF
电控柴油机喷油系统对改善载重汽车排放的贡献
3
《车用发动机》 北大核心 1994年第6期10-15,共6页
本文主要论述电控喷油对改进汽车排放的作用,其中包括燃油分配、喷油始点和增压空气状态控制等方面的电子控制以及电控系统的附加功能.文章最后具体介绍了带滑阀定时控制系的系统和电磁阀控制的泵-喷嘴系统.
关键词 柴油机 电控喷油 排放 载重汽车 油泵系统 喷油始点
在线阅读 下载PDF
调速器油泵控制回路的改造分析
4
作者 简树铃 《农村电工》 1999年第8期23-23,共1页
众所周知,电力系统的稳定是一种动态稳定.电力系统的负荷总是处于不断变化的过程中,为保证电能的频率及电压保持在额定值的允许偏差范围内,要求发电机的有功功率的输出随负荷的变动而不断调节,并维持其频率在规定范围内.这些都是通过调... 众所周知,电力系统的稳定是一种动态稳定.电力系统的负荷总是处于不断变化的过程中,为保证电能的频率及电压保持在额定值的允许偏差范围内,要求发电机的有功功率的输出随负荷的变动而不断调节,并维持其频率在规定范围内.这些都是通过调速器的调节作用达到要求的.调速器在电力系统的稳态运行过程中起着举足轻重的作用,而其油泵系统的运作又是核心. 展开更多
关键词 电力系统稳定 调速器 油泵系统 控制回路 改造
在线阅读 下载PDF
瓶盖专用注射成型机
5
作者 刘际泽 《塑料》 CAS CSCD 2004年第3期94-94,共1页
关键词 瓶盖 注射成型机 日本日精树脂工业公司 锁模力 螺杆螺筒塑化装置 温度控制系统 油泵系统
在线阅读 下载PDF
Fluid characteristic of multiphase fluid in annular space between pump barrel and plunger 被引量:5
6
作者 XING Ming-ming ZHOU Li-li +2 位作者 ZHAO Yan XUE Kai-feng ZHANG Cheng-mao 《Journal of Central South University》 SCIE EI CAS CSCD 2019年第5期1327-1341,共15页
The pump performance parameters,such as pump pressure,plunger friction and pump valve resistance,are fundamental parameters of optimal design of pump efficiency and sucker rod pumping system (SRPS).In this paper,consi... The pump performance parameters,such as pump pressure,plunger friction and pump valve resistance,are fundamental parameters of optimal design of pump efficiency and sucker rod pumping system (SRPS).In this paper,considering the characteristic of geometrical nonlinear and rheology property of multiphase fluid,the pump performance parameters are studied.Firstly,a dynamics model of annular fluid flow is built.In the detail,a partial differential equation of annular fluid is established and a computing model of fluid pressure gradient is built.Secondly,the simulation models of plunger friction and hydraulic resistance of pump valve are built.Finally,a novel simulation method of fluid pressure in annular space is proposed with software ANSYS.In order to check up the correction of models proposed in this paper,the comparison curves of experiment and simulation results are given.Based on above model,the whole simulation model of plunger pump is simulated with Visual Basic 6.0.The results show that the fluid friction of pump plunger and instantaneous resistance of pump valve are nonlinear.The impact factors of pump performance parameters are analyzed,and their characteristic curves are given,which can help to optimize the pump motion parameters and pump structural. 展开更多
关键词 sucker rod pumping system (SRPS) PUMP pump plunger pump barrel performance parameter
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部