Directly quenched Nd9.5Fe81Zr3B6.5 nanocomposite permanent magnets were prepared under different melt treatment conditions, i.e., the melt temperature was varied prior to ejection onto the quenching wheel. The effect ...Directly quenched Nd9.5Fe81Zr3B6.5 nanocomposite permanent magnets were prepared under different melt treatment conditions, i.e., the melt temperature was varied prior to ejection onto the quenching wheel. The effect of quenching temperature on the microstructure and magnetic properties of the alloys was studied by X-ray diffractometry, transmission electron microscopy and magnetization measurements. It is found that a finer and more uniform microstructure can be obtained directly from the melt quenched at lower temperature. With increasing initial quenching temperature, the optimal quenching speed decreases and the microstructure of the ribbons becomes coarser and more irregular. As a result, the magnetic properties of the alloys are deteriorated. It is believed that the break of the pre-existing Nd2Fe14B clusters and decrease in number of the developing nuclei of Nd2Fe14B phase with increase in quenching temperature may be the causes for the change of the microstructure and the magnetic properties of the ribbons.展开更多
Permanent magnet tubular linear motors(TLMs) arranged in multiple rows and multiple columns used for a radiotherapy machine were studied. Due to severe volumetric and thermal constraints, the TLMs were at high risk of...Permanent magnet tubular linear motors(TLMs) arranged in multiple rows and multiple columns used for a radiotherapy machine were studied. Due to severe volumetric and thermal constraints, the TLMs were at high risk of overheating. To predict the performance of the TLMs accurately, a multi-physics analysis approach was proposed. Specifically, it considered the coupling effects amongst the electromagnetic and the thermal models of the TLMs, as well as the fluid model of the surrounding air. To reduce computation cost, both the electromagnetic and the thermal models were based on lumped-parameter methods. Only a minimum set of numerical computation(computational fluid dynamics, CFD) was performed to model the complex fluid behavior. With the proposed approach, both steady state and transient state temperature distributions, thermal rating and permissible load can be predicted. The validity of this approach is verified through the experiment.展开更多
基金Projects(51201109,51001076)supported by the National Natural Science Foundation of ChinaProject(T201108)supported by Shenzhen Key Laboratory of Special Functional Materials(Shenzhen University),China
文摘Directly quenched Nd9.5Fe81Zr3B6.5 nanocomposite permanent magnets were prepared under different melt treatment conditions, i.e., the melt temperature was varied prior to ejection onto the quenching wheel. The effect of quenching temperature on the microstructure and magnetic properties of the alloys was studied by X-ray diffractometry, transmission electron microscopy and magnetization measurements. It is found that a finer and more uniform microstructure can be obtained directly from the melt quenched at lower temperature. With increasing initial quenching temperature, the optimal quenching speed decreases and the microstructure of the ribbons becomes coarser and more irregular. As a result, the magnetic properties of the alloys are deteriorated. It is believed that the break of the pre-existing Nd2Fe14B clusters and decrease in number of the developing nuclei of Nd2Fe14B phase with increase in quenching temperature may be the causes for the change of the microstructure and the magnetic properties of the ribbons.
基金Project(2015BAI03B00)supported by the National Key Technology R&D Program of ChinaProject(Z141100000514015)supported by Science and Technology Planning Program of Beijing,ChinaProject(SKLT12A03)supported by Tribology Science Fund of State Key Laboratory of Tribology,China
文摘Permanent magnet tubular linear motors(TLMs) arranged in multiple rows and multiple columns used for a radiotherapy machine were studied. Due to severe volumetric and thermal constraints, the TLMs were at high risk of overheating. To predict the performance of the TLMs accurately, a multi-physics analysis approach was proposed. Specifically, it considered the coupling effects amongst the electromagnetic and the thermal models of the TLMs, as well as the fluid model of the surrounding air. To reduce computation cost, both the electromagnetic and the thermal models were based on lumped-parameter methods. Only a minimum set of numerical computation(computational fluid dynamics, CFD) was performed to model the complex fluid behavior. With the proposed approach, both steady state and transient state temperature distributions, thermal rating and permissible load can be predicted. The validity of this approach is verified through the experiment.
