Mesoporous cerium-zirconium mixed oxides were prepared by hydrothermal method using cetyl trimethyl ammonium bromide (CTAB) as template. The effects of amount of template, pH value of solution and hydrothermal tempera...Mesoporous cerium-zirconium mixed oxides were prepared by hydrothermal method using cetyl trimethyl ammonium bromide (CTAB) as template. The effects of amount of template, pH value of solution and hydrothermal temperature on mesostructure of samples were systematically investigated. The final products were characterized by XRD, TEM, FT-IR, and BET. The results indicate that all the cerium-zirconium mixed oxides present a meso-structure. At molar ratio of n(CTAB)/n((Ce)+(Zr))= 0.15, pH value of 9, and hydrothermal temperature of 120 ℃, the samples obtained possess a specific surface area of 207.9 m2/g with pore diameter of 3.70 nm and pore volume of 0.19 cm3/g.展开更多
In this study,porous silica with high surface area was prepared through selective leaching of thermally activated chlorite in HCl solution.In the process,chlorite was activated by pre-calcining treatment,then activate...In this study,porous silica with high surface area was prepared through selective leaching of thermally activated chlorite in HCl solution.In the process,chlorite was activated by pre-calcining treatment,then activated components(MgO,Al_(2)O_(3),and Fe_(2)O_(3))were selectively leached by acid solution,resulting in the formation of nanopores in situ.The morphology,structure,surface area and pore-size distribution of the material were characterized by XRD,TG/DSC,^(27)Al MAS NMR,SEM,TEM and N2 adsorption−desorption isotherms.The highest specific surface area(SBET=333 m^(2)/g)was obtained by selectively leaching the 600℃ calcined chlorite from 3 mol/L HCl at 90℃ for 2 h.The pore sizes and specific surface areas can be controlled by calcination and leaching conditions.The ^(27)Al MAS NMR spectra of the samples revealed the relationship between structural transformation and the selective acid leaching properties of thermal-activated chlorite,demonstrating that AlVI transfers into AlV when chlorite changes into activated chlorite during thermal activation,and the coordinations of Al has a significant effect on acid solubility of chlorite.The as-prepared porous silica showed favorable adsorption abilities with capacity of 148.79 mg/g for methylene blue at pH of about 7 and temperature of 25℃,indicating its promising potential in adsorption application.展开更多
The matrix polymer PTBCHNB bearing o-nitrobenzyl group was successfully synthesized by copolymerization of tertiary-butyl methacrylate(TBMA), cyclohexyl methacrylate(CHMA) and o-nitrobenzyl methacrylate(NBMA) via reve...The matrix polymer PTBCHNB bearing o-nitrobenzyl group was successfully synthesized by copolymerization of tertiary-butyl methacrylate(TBMA), cyclohexyl methacrylate(CHMA) and o-nitrobenzyl methacrylate(NBMA) via reversible addition fragmentation chain transfer(RAFT) polymerization method. PTBCHNB was characterized by FTIR, 1HNMR, GPC and DSC. After UV irradiation, the o-nitrobenzyl groups of PTBCHNB were photocleaved and the resulting carboxyl groups were highly alkali soluble, and PTBCHNB was converted to PCHIBMA bearing carboxyl groups. So, the matrix polymer could be etched by mild alkali solution with no requirements of photoacid generators and other diverse additives. The photocleavable behaviors of PTBCHNB were determined by FTIR, 1H NMR and TGA analysis. The resist formulated with PTBCHNB and cast in THF solution showed square pattern of 10 μm×10 μm using a mercury-xenon lamp in a contact printing mode and tetramethyl-ammonium hydroxide aqueous solution as a developer.展开更多
基金Project(CHCL0501) supported by Hubei Provincial Open Fund of Key Laboratory of Catalytic Material Science and Technology
文摘Mesoporous cerium-zirconium mixed oxides were prepared by hydrothermal method using cetyl trimethyl ammonium bromide (CTAB) as template. The effects of amount of template, pH value of solution and hydrothermal temperature on mesostructure of samples were systematically investigated. The final products were characterized by XRD, TEM, FT-IR, and BET. The results indicate that all the cerium-zirconium mixed oxides present a meso-structure. At molar ratio of n(CTAB)/n((Ce)+(Zr))= 0.15, pH value of 9, and hydrothermal temperature of 120 ℃, the samples obtained possess a specific surface area of 207.9 m2/g with pore diameter of 3.70 nm and pore volume of 0.19 cm3/g.
基金Project(51772153)supported by the National Natural Science Foundation of China。
文摘In this study,porous silica with high surface area was prepared through selective leaching of thermally activated chlorite in HCl solution.In the process,chlorite was activated by pre-calcining treatment,then activated components(MgO,Al_(2)O_(3),and Fe_(2)O_(3))were selectively leached by acid solution,resulting in the formation of nanopores in situ.The morphology,structure,surface area and pore-size distribution of the material were characterized by XRD,TG/DSC,^(27)Al MAS NMR,SEM,TEM and N2 adsorption−desorption isotherms.The highest specific surface area(SBET=333 m^(2)/g)was obtained by selectively leaching the 600℃ calcined chlorite from 3 mol/L HCl at 90℃ for 2 h.The pore sizes and specific surface areas can be controlled by calcination and leaching conditions.The ^(27)Al MAS NMR spectra of the samples revealed the relationship between structural transformation and the selective acid leaching properties of thermal-activated chlorite,demonstrating that AlVI transfers into AlV when chlorite changes into activated chlorite during thermal activation,and the coordinations of Al has a significant effect on acid solubility of chlorite.The as-prepared porous silica showed favorable adsorption abilities with capacity of 148.79 mg/g for methylene blue at pH of about 7 and temperature of 25℃,indicating its promising potential in adsorption application.
基金Project(2008AA03323) supported by the High-Tech Research and Development of ChinaProject(21374016) supported by the National Natural Science Foundation of ChinaProject(BY201153) supported by Production,Forward-Looking Joint Research Project of Jiangsu Province,China
文摘The matrix polymer PTBCHNB bearing o-nitrobenzyl group was successfully synthesized by copolymerization of tertiary-butyl methacrylate(TBMA), cyclohexyl methacrylate(CHMA) and o-nitrobenzyl methacrylate(NBMA) via reversible addition fragmentation chain transfer(RAFT) polymerization method. PTBCHNB was characterized by FTIR, 1HNMR, GPC and DSC. After UV irradiation, the o-nitrobenzyl groups of PTBCHNB were photocleaved and the resulting carboxyl groups were highly alkali soluble, and PTBCHNB was converted to PCHIBMA bearing carboxyl groups. So, the matrix polymer could be etched by mild alkali solution with no requirements of photoacid generators and other diverse additives. The photocleavable behaviors of PTBCHNB were determined by FTIR, 1H NMR and TGA analysis. The resist formulated with PTBCHNB and cast in THF solution showed square pattern of 10 μm×10 μm using a mercury-xenon lamp in a contact printing mode and tetramethyl-ammonium hydroxide aqueous solution as a developer.
