期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
亚稳β型TB8钛合金置氢特性研究
1
作者 江政 袁宝国 +1 位作者 李萍 郭小鱼 《合肥工业大学学报(自然科学版)》 CAS CSCD 北大核心 2012年第3期299-302,共4页
文章采用高温气相充氢法对TB8钛合金进行常压置氢实验,以研究亚稳β型TB8钛合金的置氢特性,即氢气流速、置氢温度和置氢时间对置氢量的影响规律,并建立了相应的数学模型。结果表明,氢气流速越快,合金中氢的质量分数越高,最终达到饱和;... 文章采用高温气相充氢法对TB8钛合金进行常压置氢实验,以研究亚稳β型TB8钛合金的置氢特性,即氢气流速、置氢温度和置氢时间对置氢量的影响规律,并建立了相应的数学模型。结果表明,氢气流速越快,合金中氢的质量分数越高,最终达到饱和;置氢量随置氢温度的变化规律为先增加后降低,当达到峰值后遵从Sievert’s定律;随置氢时间的延长,置氢量逐渐增加,并最终趋于平衡。 展开更多
关键词 钛合金 处理 特性 氢质量分数 Sievert’s定律
在线阅读 下载PDF
TC4钛合金表面氧化皮去除 被引量:15
2
作者 乔永莲 刘会军 +1 位作者 许茜 沙春鹏 《沈阳工业大学学报》 EI CAS 北大核心 2014年第2期165-169,共5页
针对TC4钛合金在热成形过程中其表面易形成一层致密的氧化皮且氧化皮的表面形貌和厚度均受温度影响这一现象,采用先热碱洗后酸洗的工艺过程对TC4钛合金在不同温度下氧化后的氧化皮去除工艺进行了研究.采用光学显微镜对氧化皮形貌进行表... 针对TC4钛合金在热成形过程中其表面易形成一层致密的氧化皮且氧化皮的表面形貌和厚度均受温度影响这一现象,采用先热碱洗后酸洗的工艺过程对TC4钛合金在不同温度下氧化后的氧化皮去除工艺进行了研究.采用光学显微镜对氧化皮形貌进行表征,研究了时间对去除氧化皮的影响,且通过国际上较先进的美国LECO公司RH-404定氢仪对去除氧化皮后钛合金的氢质量分数进行了测定.结果表明,通过采用先热碱洗后酸洗的过程,TC4钛合金表面的氧化皮可以完全被去除.此外,通过RH-404定氢仪测得合金中氢质量分数的变化不大. 展开更多
关键词 钛合金 热成形 光学显微镜 氧化皮 热碱洗 酸洗 氢质量分数
在线阅读 下载PDF
Hydrogen sorption properties of nanocrystalline Mg_2FeH_6-based complex and catalytic effect of TiO_2
3
作者 刘燚 汤盛龙 +3 位作者 方于虎 刘怀菲 崔建民 李松林 《Journal of Central South University》 SCIE EI CAS 2009年第6期876-880,共5页
The diversities of hydrogen sorption properties of Mg2FeH6-based complexes with and without TiO2 were investigated. Mg2FeH6-based complexes with and without TiO2 were synthesized respectively by reactive mechanical al... The diversities of hydrogen sorption properties of Mg2FeH6-based complexes with and without TiO2 were investigated. Mg2FeH6-based complexes with and without TiO2 were synthesized respectively by reactive mechanical alloying,and hydrogen sorption properties of the complexes were examined by Sieverts-type apparatus. The results show that the sample without TiO2 releases 4.43 % (mass fraction) hydrogen in 1.5 ks at 653 K under 0.1 MPa H2 pressure and absorbs 90% of the total 4.43 % (mass fraction) hydrogen absorbed in 85 s at 623 K under 4.0 MPa H2 pressure. But for the sample with TiO2 addition under the same condition,it only needs 400 s to release all of the stored hydrogen and 60 s to absorb 90% of the total hydrogen absorbed. The activation energies for desorption process of the samples with and without TiO2 are determined to be 71.2 and 80.3 kJ/(mol.K),respectively. The improvement in hydrogen sorption rate and and reduction in activation energy can be attributed to the addition of TiO2. 展开更多
关键词 Mg-based hydrogen storage materials reactive mechanical alloying hydrogen sorption properties KINETICS activation energy
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部