In this paper, the hydro-mechanical behavior and physical properties of mature fine tailings(MFT) under atmospheric drying are investigated through a column study. In the study, evaporation takes place in the developm...In this paper, the hydro-mechanical behavior and physical properties of mature fine tailings(MFT) under atmospheric drying are investigated through a column study. In the study, evaporation takes place in the development of suction in the upper parts of the column and increasing suction leads to higher strength in the tailings. After 5 days, the suction in the first lift is around 17 k Pa in the upper part of the column.When a second lift is added, the first lift initially loses strength but over a 30 days' period, the strength is recovered to its prior value and suction in the second lift reaches 500 k Pa. The vane shear strength values show a substantial increase in the strength of the MFT after 30 days under atmospheric drying and drainage. The 90% strength found in the column exceeds the threshold(5 k Pa). The hydraulic-mechanical properties of the deposited tailings are closely coupled due to several mechanisms, such as evaporation,drainage, self-consolidation, suction and crack development. The findings of this study will provide a better understanding of the placement behavior of multiple lifts of MFT and thus contribute to reclamation design standards and reduce the use of dedicated disposal areas.展开更多
High ash thermal coal from India was used to conduct the dry processing of fine coal using a pneumatic table to evolve a techno-economically novel technique. The fine as-received sample having 55.2g ash was subjected ...High ash thermal coal from India was used to conduct the dry processing of fine coal using a pneumatic table to evolve a techno-economically novel technique. The fine as-received sample having 55.2g ash was subjected to washability studies at variant densities from 1.4 to 2.2 to assess the amenability to separa- tion. The experiments were conducted using a central composite design for assessing the interactive effects of the variable parameters of a pneumatic table on the product yield and ash content. The performance of the pneumatic table was analyzed in terms of clean coal yield, recovery of combustibles, separation efficiency （Esp） and useful heat value of clean coal. The combustibles of clean coal obtained through a single stage operation at 35% and 38.7% ash were 40% and 63% respectively. However, the two stage processing was more effective in reducing the ash content in the clean coal. The rougher concentrate generated at higher ash level was subsequently processed in different conditions at 35% ash level, and 58g combustibles could be recovered. Hence, two stage processing increases the combustibles by 18 units and the useful heat value of clean coal increases from 1190 kcal/kg to 3750 kcal/kg.展开更多
The requirements that a business needs to consider when building a wood panels manufacturing plant are much the same as they have been for decades, but today there is also the need for multiple environmental studies a...The requirements that a business needs to consider when building a wood panels manufacturing plant are much the same as they have been for decades, but today there is also the need for multiple environmental studies and permits. These are costly and time consuming additional expenses that often are the longest lead-time items on any project. Most industrialized countries have legislation in place to limit and control the negative impact that emission of pollutants may have on the environment. This paper discusses what is actually happening inside wood drying plants, and the prerequisite conditions for genesis of pyrolytic products relative to the operational parameters, such as choice of input raw materials, driers design and operational regime, choice of fuels for the heat generation and how these factors influence production of stack emission. The characterization of emission condensate by analytical methods is described, and survey of emission control system in use worldwide is described, and means of investigating what may be the optimum design for the control of emission is discussed. Alternate uses of utilizing the condensate, other than burning, are presented for consideration.展开更多
基金the University of Ottawa and the National Natural Sciences and Engineering Research Council of Canada(NSERC)for supporting this research
文摘In this paper, the hydro-mechanical behavior and physical properties of mature fine tailings(MFT) under atmospheric drying are investigated through a column study. In the study, evaporation takes place in the development of suction in the upper parts of the column and increasing suction leads to higher strength in the tailings. After 5 days, the suction in the first lift is around 17 k Pa in the upper part of the column.When a second lift is added, the first lift initially loses strength but over a 30 days' period, the strength is recovered to its prior value and suction in the second lift reaches 500 k Pa. The vane shear strength values show a substantial increase in the strength of the MFT after 30 days under atmospheric drying and drainage. The 90% strength found in the column exceeds the threshold(5 k Pa). The hydraulic-mechanical properties of the deposited tailings are closely coupled due to several mechanisms, such as evaporation,drainage, self-consolidation, suction and crack development. The findings of this study will provide a better understanding of the placement behavior of multiple lifts of MFT and thus contribute to reclamation design standards and reduce the use of dedicated disposal areas.
基金the Council of Scientific and Industrial Research, India for supporting this work (Network Project: ESC 0109)
文摘High ash thermal coal from India was used to conduct the dry processing of fine coal using a pneumatic table to evolve a techno-economically novel technique. The fine as-received sample having 55.2g ash was subjected to washability studies at variant densities from 1.4 to 2.2 to assess the amenability to separa- tion. The experiments were conducted using a central composite design for assessing the interactive effects of the variable parameters of a pneumatic table on the product yield and ash content. The performance of the pneumatic table was analyzed in terms of clean coal yield, recovery of combustibles, separation efficiency （Esp） and useful heat value of clean coal. The combustibles of clean coal obtained through a single stage operation at 35% and 38.7% ash were 40% and 63% respectively. However, the two stage processing was more effective in reducing the ash content in the clean coal. The rougher concentrate generated at higher ash level was subsequently processed in different conditions at 35% ash level, and 58g combustibles could be recovered. Hence, two stage processing increases the combustibles by 18 units and the useful heat value of clean coal increases from 1190 kcal/kg to 3750 kcal/kg.
文摘The requirements that a business needs to consider when building a wood panels manufacturing plant are much the same as they have been for decades, but today there is also the need for multiple environmental studies and permits. These are costly and time consuming additional expenses that often are the longest lead-time items on any project. Most industrialized countries have legislation in place to limit and control the negative impact that emission of pollutants may have on the environment. This paper discusses what is actually happening inside wood drying plants, and the prerequisite conditions for genesis of pyrolytic products relative to the operational parameters, such as choice of input raw materials, driers design and operational regime, choice of fuels for the heat generation and how these factors influence production of stack emission. The characterization of emission condensate by analytical methods is described, and survey of emission control system in use worldwide is described, and means of investigating what may be the optimum design for the control of emission is discussed. Alternate uses of utilizing the condensate, other than burning, are presented for consideration.
