期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
上模压下速度对带阻尼台叶片精锻影响的研究 被引量:3
1
作者 顾亚萍 刘郁丽 +2 位作者 杨合 高涛 张建设 《材料科学与工艺》 EI CAS CSCD 北大核心 2007年第6期792-796,共5页
利用DEFORM-3D,采用刚粘塑性有限元法,建立了带阻尼台叶片精锻过程的三维有限元模型,模拟分析了上模压下速度对带阻尼台叶片精锻过程的影响规律.获得了不同上模压下速度时的等效应力、最大主应力等场变量分布及带阻尼台叶片精锻过程载荷... 利用DEFORM-3D,采用刚粘塑性有限元法,建立了带阻尼台叶片精锻过程的三维有限元模型,模拟分析了上模压下速度对带阻尼台叶片精锻过程的影响规律.获得了不同上模压下速度时的等效应力、最大主应力等场变量分布及带阻尼台叶片精锻过程载荷-行程曲线,并根据最大主应力分布提出了对终锻坯料形状设计的建议.研究结果对带阻尼台叶片精锻工艺的制订具有重要的指导意义. 展开更多
关键词 模压速度 精密锻造 带阻尼台叶片 DEFORM3D
在线阅读 下载PDF
塑料光学透镜模压成型有限元分析
2
作者 吴轶刚 闫钰锋 +1 位作者 周见红 白素平 《工程塑料应用》 CAS CSCD 北大核心 2018年第9期72-77,共6页
针对一种新型的塑料光学透镜加工技术——透镜模压成型技术,为了快速且以较低成本获取该成型技术较优的工艺参数,基于ANSYS有限元分析软件和透镜材料聚甲基丙烯酸甲酯(PMMA)的特性,建立了PMMA材料的黏弹性模型,然后在不同的模压温度和... 针对一种新型的塑料光学透镜加工技术——透镜模压成型技术,为了快速且以较低成本获取该成型技术较优的工艺参数,基于ANSYS有限元分析软件和透镜材料聚甲基丙烯酸甲酯(PMMA)的特性,建立了PMMA材料的黏弹性模型,然后在不同的模压温度和模压速度下对透镜模压过程进行了仿真,对比分析了这两种工艺参数对透镜成型残余应力的影响。结果表明,随着模压温度的升高和模压速度的降低,成型透镜的最大残余应力值相应减小,当模压温度达到125℃后或模压速度小于1mm/s时,最大残余应力下降趋势趋于稳定。PMMA透镜模压成型适宜的模压温度和模压速度分别为125℃和0.5mm/s。 展开更多
关键词 塑料光学透镜 模压成型 模压温度 模压速度 黏弹性 有限元分析 残余应力
在线阅读 下载PDF
Investigation of Barree-Conway non-Darcy flow effects on coalbed methane production
3
作者 杨蕾 芮洪兴 赵庆利 《Journal of Central South University》 SCIE EI CAS CSCD 2016年第12期3322-3331,共10页
Coalbed gas non-Darcy flow has been observed in high permeable fracture systems,and some mathematical and numerical models have been proposed to study the effects of non-Darcy flow using Forchheimer non-Darcy model.Ho... Coalbed gas non-Darcy flow has been observed in high permeable fracture systems,and some mathematical and numerical models have been proposed to study the effects of non-Darcy flow using Forchheimer non-Darcy model.However,experimental results show that the assumption of a constant Forchheimer factor may cause some limitations in using Forchheimer model to describe non-Darcy flow in porous media.In order to investigate the effects of non-Darcy flow on coalbed methane production,this work presents a more general coalbed gas non-Darcy flow model according to Barree-Conway equation,which could describe the entire range of relationships between flow velocity and pressure gradient from low to high flow velocity.An expanded mixed finite element method is introduced to solve the coalbed gas non-Darcy flow model,in which the gas pressure and velocity can be approximated simultaneously.Error estimate results indicate that pressure and velocity could achieve first-order convergence rate.Non-Darcy simulation results indicate that the non-Darcy effect is significant in the zone near the wellbore,and with the distance from the wellbore increasing,the non-Darcy effect becomes weak gradually.From simulation results,we have also found that the non-Darcy effect is more significant at a lower bottom-hole pressure,and the gas production from non-Darcy flow is lower than the production from Darcy flow under the same permeable condition. 展开更多
关键词 non-Darcy flow Barree-Conway model coalbed methane production error estimate numerical simulation
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部