Coal seam pyrolysis occurs during coal seam fires and during underground coal gasification. This is an important source of polycyclic aromatic hydrocarbon （PAH） emission in China. Pyrolysis in a coal seam was simula...Coal seam pyrolysis occurs during coal seam fires and during underground coal gasification. This is an important source of polycyclic aromatic hydrocarbon （PAH） emission in China. Pyrolysis in a coal seam was simulated in a tubular furnace. The 16 US Environmental Protection Agency priority controlled PAHs were analyzed by HPLC. The effects of temperature, heating rate, pyrolysis atmosphere, and coal size were investigated. The results indicate that the 3-ring PAHs AcP and AcPy are the main species in the pyrolysis gas. The 2-ring NaP and the 4-ring Pyr are also of concern. Increasing temperature caused the total PAH yield to go through a minimum. The lowest value was obtained at the temperature of 600℃. Higher heating rates promote PAH formation, especially formation of the lower molecular weight PAHs. The typical heating rate in a coal seam, 5 ℃/min, results in intermediate yields of PAHs. The total PAHs yield in an atmosphere of N2 is about 1.81 times that seen without added N2, which indicates that an air flow through the coal seam accelerates the formation of PAHs. An increase in coal particle size reduces the total PAHs emission but promotes the formation of 5- and f-ring PAHs.展开更多
Design of rib support systems in U.S. coal mines is based primarily on local practices and experience. A better understanding of current rib support practices in U.S. coal mines is crucial for developing a sound engin...Design of rib support systems in U.S. coal mines is based primarily on local practices and experience. A better understanding of current rib support practices in U.S. coal mines is crucial for developing a sound engineering rib support design tool. The objective of this paper is to analyze the current practices of rib control in U.S. coal mines. Twenty underground coal mines were studied representing various coal basins,coal seams,geology,loading conditions,and rib control strategies. The key findings are:(1) any rib design guideline or tool should take into account external rib support as well as internal bolting;(2) rib bolts on their own cannot contain rib spall,especially in soft ribs subjected to significant load—external rib control devices such as mesh are required in such cases to contain rib sloughing;(3) the majority of the studied mines follow the overburden depth and entry height thresholds recommended by the Program Information Bulletin 11-29 issued by the Mine Safety and Health Administration;(4) potential rib instability occurred when certain geological features prevailed—these include draw slate and/or bone coal near the rib/roof line,claystone partings,and soft coal bench overlain by rock strata;(5) 47% of the studied rib spall was classified as blocky—this could indicate a high potential of rib hazards; and(6) rib injury rates of the studied mines for the last three years emphasize the need for more rib control management for mines operating at overburden depths between 152.4 m and 304.8 m.展开更多
基金provided by the National Natural Science Foundation of China (No. 50876112)the Fundamental Research Funds for the Central Universities (No. 2009QH13)the International Scientific and Technological Cooperation Project(No. 2010DFR60610)
文摘Coal seam pyrolysis occurs during coal seam fires and during underground coal gasification. This is an important source of polycyclic aromatic hydrocarbon （PAH） emission in China. Pyrolysis in a coal seam was simulated in a tubular furnace. The 16 US Environmental Protection Agency priority controlled PAHs were analyzed by HPLC. The effects of temperature, heating rate, pyrolysis atmosphere, and coal size were investigated. The results indicate that the 3-ring PAHs AcP and AcPy are the main species in the pyrolysis gas. The 2-ring NaP and the 4-ring Pyr are also of concern. Increasing temperature caused the total PAH yield to go through a minimum. The lowest value was obtained at the temperature of 600℃. Higher heating rates promote PAH formation, especially formation of the lower molecular weight PAHs. The typical heating rate in a coal seam, 5 ℃/min, results in intermediate yields of PAHs. The total PAHs yield in an atmosphere of N2 is about 1.81 times that seen without added N2, which indicates that an air flow through the coal seam accelerates the formation of PAHs. An increase in coal particle size reduces the total PAHs emission but promotes the formation of 5- and f-ring PAHs.
文摘Design of rib support systems in U.S. coal mines is based primarily on local practices and experience. A better understanding of current rib support practices in U.S. coal mines is crucial for developing a sound engineering rib support design tool. The objective of this paper is to analyze the current practices of rib control in U.S. coal mines. Twenty underground coal mines were studied representing various coal basins,coal seams,geology,loading conditions,and rib control strategies. The key findings are:(1) any rib design guideline or tool should take into account external rib support as well as internal bolting;(2) rib bolts on their own cannot contain rib spall,especially in soft ribs subjected to significant load—external rib control devices such as mesh are required in such cases to contain rib sloughing;(3) the majority of the studied mines follow the overburden depth and entry height thresholds recommended by the Program Information Bulletin 11-29 issued by the Mine Safety and Health Administration;(4) potential rib instability occurred when certain geological features prevailed—these include draw slate and/or bone coal near the rib/roof line,claystone partings,and soft coal bench overlain by rock strata;(5) 47% of the studied rib spall was classified as blocky—this could indicate a high potential of rib hazards; and(6) rib injury rates of the studied mines for the last three years emphasize the need for more rib control management for mines operating at overburden depths between 152.4 m and 304.8 m.
