期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
激光旋切法加工高质量微小孔工艺与理论研究 被引量:17
1
作者 段文强 王恪典 +3 位作者 董霞 梅雪松 王文君 凡正杰 《西安交通大学学报》 EI CAS CSCD 北大核心 2015年第3期95-103,112,共10页
针对激光微小孔加工中微小孔几何形貌和孔壁重铸层这2个影响微小孔加工质量的关键因素,利用大功率Nd:YAG毫秒脉冲激光器,分别在304不锈钢和DZ445定向结晶镍基合金上进行孔加工实验,主要研究了激光旋切法加工微小孔的工艺特点,对旋切法... 针对激光微小孔加工中微小孔几何形貌和孔壁重铸层这2个影响微小孔加工质量的关键因素,利用大功率Nd:YAG毫秒脉冲激光器,分别在304不锈钢和DZ445定向结晶镍基合金上进行孔加工实验,主要研究了激光旋切法加工微小孔的工艺特点,对旋切法所涉及的3个关键参数(旋切路径、旋切速度、旋切圈数)对孔质量的影响规律进行了深入探讨。结果显示:边缘起点的旋切路径易导致孔缘出现缺口,而圆心起点的旋切路径可以避免这种现象;旋切速度和旋切圈数对孔壁重铸层厚度影响显著,重铸层厚度随着旋切速度的降低和旋切圈数的增加而减小,其机理在于,孔壁重铸层在旋切过程中会因激光的重复照射再次发生熔化,并在气化压力与辅助气压等驱动力的共同作用下克服黏滞力发生质量迁移,进而从孔出口排出,在其他工艺条件不变的情况下,重铸层的厚度与质量迁移的持续时间成反比。 展开更多
关键词 激光打孔 旋切 重铸层 旋切路径 旋切速度 旋切圈数
在线阅读 下载PDF
Numerical simulation of the flow field in a dense-media cyclone 被引量:14
2
作者 SHEN Li-juan HU Yan-feng +2 位作者 CHEN Jian-zhong ZHANG Peng DAI Hua-zhen 《Mining Science and Technology》 EI CAS 2009年第2期225-229,共5页
An analytical study of the flow and pressure fields inside a small-diameter dense-media cyclone is presented.The simulations were done with the help of the CFD software FLUENT.The following conclusions were reached:th... An analytical study of the flow and pressure fields inside a small-diameter dense-media cyclone is presented.The simulations were done with the help of the CFD software FLUENT.The following conclusions were reached:the tangential velocity tends to increase when moving from the center toward the exterior.The velocity then begins to decrease when the maximum velocity point is reached.The velocity field divides into two different sections;an inner swirling zone and an outer swirling zone.The axial velocity points down at the wall and gradually decreases toward the bottom.Continuing toward the bottom,the axial velocity passes through zero and then gradually increases in the opposite direction.In the cyclone's central zone,the pressure is negative and the suction of air allows an air column to be formed therein.At the center of the radial negative zone the pressure drops to its lowest value—phenomenon that has been verified by theoretical analysis.Some discrepancies between the observed data and the simulated data are noted when an analysis in made on a cyclone operating with either fresh water only or with water with added heavy particles. 展开更多
关键词 CYCLONE numerical simulation tangential velocity axial velocity pressure filed
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部