The geometric accuracy of topographic mapping with high-resolution remote sensing images is inevita-bly affected by the orbiter attitude jitter.Therefore,it is necessary to conduct preliminary research on the stereo m...The geometric accuracy of topographic mapping with high-resolution remote sensing images is inevita-bly affected by the orbiter attitude jitter.Therefore,it is necessary to conduct preliminary research on the stereo mapping camera equipped on lunar orbiter before launching.In this work,an imaging simulation method consid-ering the attitude jitter is presented.The impact analysis of different attitude jitter on terrain undulation is conduct-ed by simulating jitter at three attitude angles,respectively.The proposed simulation method is based on the rigor-ous sensor model,using the lunar digital elevation model(DEM)and orthoimage as reference data.The orbit and attitude of the lunar stereo mapping camera are simulated while considering the attitude jitter.Two-dimensional simulated stereo images are generated according to the position and attitude of the orbiter in a given orbit.Experi-mental analyses were conducted by the DEM with the simulated stereo image.The simulation imaging results demonstrate that the proposed method can ensure imaging efficiency without losing the accuracy of topographic mapping.The effect of attitude jitter on the stereo mapping accuracy of the simulated images was analyzed through a DEM comparison.展开更多
A slotting method for cosine gears was proposed by using the involute cutter based on the conjugate theories of digital surface and gear meshing. The slotting model between the cosine tooth surface represented by disc...A slotting method for cosine gears was proposed by using the involute cutter based on the conjugate theories of digital surface and gear meshing. The slotting model between the cosine tooth surface represented by discrete points and the cutter figuration determined by analytic function was built for their geometrical relationship and conjugate motion during the machining process. Conjugate points in the cutter section corresponding to the discrete points on the cosine gear tooth surface and the conjugate movements were solved. By using the flexible control of the CNC procedure, the active control of the cutting trace of the slotting cutter was accomplished and the envelop forming of the cosine gear was obtained. Based on the software C++ and Matlab, the computer aided manufacturing(CAM) system of the cosine gear was developed, and the simulation of the slotting process was accomplished. Several examples were provided to illustrate the approach. The result of the simulation demonstrates that the proposed slotting method is feasible.展开更多
A high-precision pseudo-noise ranging system is often required in satellite-formation missions. But in an actual PN ranging system, digital signal processing limits the ranging accuracy, only level up with meter-scale...A high-precision pseudo-noise ranging system is often required in satellite-formation missions. But in an actual PN ranging system, digital signal processing limits the ranging accuracy, only level up with meter-scale. Using non-integer chip to sample time ratio, noncommensurate sampling was seen as an effective solution to cope with the drawback of digital effects. However, researchers only paid attention to selecting specific ratios or giving a simulation model to verify the effectiveness of the noncommensurate ratios. A qualitative analysis model is proposed to characterize the relationship between the range accuracy and the noncommensurate sampling parameters. Moreover, a method is also presented which can be used to choose the noncommensurate ratio and the correlation length to get higher phase delay distinguishability and lower range jitter. The simulation results indicate the correctness of our analyses and the optimal ranging accuracy can be up to centimeter-level with the proposed approach.展开更多
Due to the advantages of low cost,fast response and pollution resistance,digital hydraulic pump/motor can replace conventional variable hydraulic pump/motor in many application fields.However,digital hydraulic compone...Due to the advantages of low cost,fast response and pollution resistance,digital hydraulic pump/motor can replace conventional variable hydraulic pump/motor in many application fields.However,digital hydraulic components produce large hydraulic impact at variable moments,which will shorten the service life of mechanical components.Through the simulation analysis of the variable process of digital pump/motor,it is found that the discontinuous flow caused by displacement step changes is the fundamental cause of hydraulic impact.The data analysis results of experimental tests are in good agreement with the simulation analysis results.In view of hydraulic secondary components,a variable control method based on dual-mode operating characteristics is proposed.The TOPSIS algorithm is used to give comprehensive evaluation of the displacement control results after this method.The results show that the control quality of digital pump/motor after adopting the control method has been effectively improved,with an average improvement of about 40%.展开更多
In the process of numerical control machining simulation,the workpiece surface is usually described with the uniform triangular mesh model.To alleviate the contradiction between the simulation speed and accuracy in th...In the process of numerical control machining simulation,the workpiece surface is usually described with the uniform triangular mesh model.To alleviate the contradiction between the simulation speed and accuracy in this model,two improved methods,i.e.,the local refinement triangular mesh modeling method and the adaptive triangular mesh modeling method were presented.The simulation results show that when the final shape of the workpiece is known and its mathematic representation is simple,the local refinement triangular mesh modeling method is preferred;when the final shape of the workpiece is unknown and its mathematic description is complicated,the adaptive triangular mesh modeling method is more suitable.The experimental results show that both methods are more targeted and practical and can meet the requirements of real-time and precision in simulation.展开更多
The hydraulic roll-bending device was studied, which was widely used in modem cold rolling mills to regulate the strip flatness. The loaded roll gap crown mathematic model and the strip crown mathematic model of the r...The hydraulic roll-bending device was studied, which was widely used in modem cold rolling mills to regulate the strip flatness. The loaded roll gap crown mathematic model and the strip crown mathematic model of the reversing cold rolling process were established, and the deformation model of roll stack system of the 6-high 1 250 mm high crown （HC） reversing cold rolling mill was built by slit beam method. The simulation results show that, the quadratic component of strip crown decreases nearly linearly with the increase of the work roll bending force, when the shifting value of intermediate roll is determined by the rolling process. From the first pass to the fifth pass of reversing rolling process, the crown controllability of bending force is gradually weakened. Base on analyzing the relationship among the main factors associated with roll-bending force in reversing multi-pass rolling, such as strip width and rolling force, a preset mathematic model of bending force is developed by genetic algorithm. The simulation data demonstrate that the relative deviation of flatness criterions in each rolling pass is improved significantly and the mean relative deviation of all five passes is decreased from 25.1% to 1.7%. The model can keep good shape in multi-pass reversing cold rolling process with the high prediction accuracy and can be used to guide the production process.展开更多
The application of new-designed levitation controller requires extensive validation prior to enter into commercial service. However, huge mounts of approximations and assumptions lead the theoretical analysis away fro...The application of new-designed levitation controller requires extensive validation prior to enter into commercial service. However, huge mounts of approximations and assumptions lead the theoretical analysis away from the engineering practice. The experimental methods are time-consuming and financial expensive, even unrealizable due to the lack of suitable sensors. Numerical simulations can bridge the gap between the theoretical analysis and experimental techniques. A complete overall dynamic model of maglev levitation system is derived in this work, which includes the simple-supported bridges, the calculation of electromagnetic force with more details, the stress of levitation modules and the cabin. Based on the aforementioned model, it shows that the inherent nonlinearity, inner coupling, misalignments between the sensors and actuators, and self-excited vibration are the main issues that should be considered during the design process of controller. Then, the backstepping controller based on the mathematical model of the module with reasonable simplifications is proposed, and the stability proofs are listed. To show the advantage of controller, two numerical simulation experiments are carried out. Finally, the results illustrating closed-loop performance are provided.展开更多
A mathematical model of gear tooth profiles using the ellipse curve, whose curvature is convenient to control by changing the mathematical parameters as its line of action, was built based on the meshing theory. The e...A mathematical model of gear tooth profiles using the ellipse curve, whose curvature is convenient to control by changing the mathematical parameters as its line of action, was built based on the meshing theory. The equation of undercutting condition was derived from the model. A special epicycloidal tooth profile was also presented. An example gear drive with variation of the ellipse parameters was taken to illustrate the proposed method. The contact ratio of the gear drive designed by the proposed method was analyzed. A comparison of the property of the gear drive designed with the involute gear drive was also carried out. The results confirm that the proposed gear drive has higher contact ratio in comparison with the involute gear drive.展开更多
基金Supported by the National Natural Science Foundation of China(42221002,42171432)Shanghai Municipal Science and Technology Major Project(2021SHZDZX0100)the Fundamental Research Funds for the Central Universities.
文摘The geometric accuracy of topographic mapping with high-resolution remote sensing images is inevita-bly affected by the orbiter attitude jitter.Therefore,it is necessary to conduct preliminary research on the stereo mapping camera equipped on lunar orbiter before launching.In this work,an imaging simulation method consid-ering the attitude jitter is presented.The impact analysis of different attitude jitter on terrain undulation is conduct-ed by simulating jitter at three attitude angles,respectively.The proposed simulation method is based on the rigor-ous sensor model,using the lunar digital elevation model(DEM)and orthoimage as reference data.The orbit and attitude of the lunar stereo mapping camera are simulated while considering the attitude jitter.Two-dimensional simulated stereo images are generated according to the position and attitude of the orbiter in a given orbit.Experi-mental analyses were conducted by the DEM with the simulated stereo image.The simulation imaging results demonstrate that the proposed method can ensure imaging efficiency without losing the accuracy of topographic mapping.The effect of attitude jitter on the stereo mapping accuracy of the simulated images was analyzed through a DEM comparison.
基金Projects(51205335,50975242,51375411) supported by the National Natural Science Foundation of ChinaProject(2013J01209) supported by the Natural Science Foundation of Fujian Province,China
文摘A slotting method for cosine gears was proposed by using the involute cutter based on the conjugate theories of digital surface and gear meshing. The slotting model between the cosine tooth surface represented by discrete points and the cutter figuration determined by analytic function was built for their geometrical relationship and conjugate motion during the machining process. Conjugate points in the cutter section corresponding to the discrete points on the cosine gear tooth surface and the conjugate movements were solved. By using the flexible control of the CNC procedure, the active control of the cutting trace of the slotting cutter was accomplished and the envelop forming of the cosine gear was obtained. Based on the software C++ and Matlab, the computer aided manufacturing(CAM) system of the cosine gear was developed, and the simulation of the slotting process was accomplished. Several examples were provided to illustrate the approach. The result of the simulation demonstrates that the proposed slotting method is feasible.
基金Project(60904090) supported by the National Natural Science Foundation of China
文摘A high-precision pseudo-noise ranging system is often required in satellite-formation missions. But in an actual PN ranging system, digital signal processing limits the ranging accuracy, only level up with meter-scale. Using non-integer chip to sample time ratio, noncommensurate sampling was seen as an effective solution to cope with the drawback of digital effects. However, researchers only paid attention to selecting specific ratios or giving a simulation model to verify the effectiveness of the noncommensurate ratios. A qualitative analysis model is proposed to characterize the relationship between the range accuracy and the noncommensurate sampling parameters. Moreover, a method is also presented which can be used to choose the noncommensurate ratio and the correlation length to get higher phase delay distinguishability and lower range jitter. The simulation results indicate the correctness of our analyses and the optimal ranging accuracy can be up to centimeter-level with the proposed approach.
基金Project(51405183)supported by the National Natural Science Foundation of China。
文摘Due to the advantages of low cost,fast response and pollution resistance,digital hydraulic pump/motor can replace conventional variable hydraulic pump/motor in many application fields.However,digital hydraulic components produce large hydraulic impact at variable moments,which will shorten the service life of mechanical components.Through the simulation analysis of the variable process of digital pump/motor,it is found that the discontinuous flow caused by displacement step changes is the fundamental cause of hydraulic impact.The data analysis results of experimental tests are in good agreement with the simulation analysis results.In view of hydraulic secondary components,a variable control method based on dual-mode operating characteristics is proposed.The TOPSIS algorithm is used to give comprehensive evaluation of the displacement control results after this method.The results show that the control quality of digital pump/motor after adopting the control method has been effectively improved,with an average improvement of about 40%.
基金Project(60772089) supported by the National Natural Science Foundation of ChinaProject(20080440939) supported by the China Postdoctoral Science Foundation
文摘In the process of numerical control machining simulation,the workpiece surface is usually described with the uniform triangular mesh model.To alleviate the contradiction between the simulation speed and accuracy in this model,two improved methods,i.e.,the local refinement triangular mesh modeling method and the adaptive triangular mesh modeling method were presented.The simulation results show that when the final shape of the workpiece is known and its mathematic representation is simple,the local refinement triangular mesh modeling method is preferred;when the final shape of the workpiece is unknown and its mathematic description is complicated,the adaptive triangular mesh modeling method is more suitable.The experimental results show that both methods are more targeted and practical and can meet the requirements of real-time and precision in simulation.
基金Project(20050311890) supported by the Science and Technology Development Foundation of University of Science and Technology Beijing,China
文摘The hydraulic roll-bending device was studied, which was widely used in modem cold rolling mills to regulate the strip flatness. The loaded roll gap crown mathematic model and the strip crown mathematic model of the reversing cold rolling process were established, and the deformation model of roll stack system of the 6-high 1 250 mm high crown （HC） reversing cold rolling mill was built by slit beam method. The simulation results show that, the quadratic component of strip crown decreases nearly linearly with the increase of the work roll bending force, when the shifting value of intermediate roll is determined by the rolling process. From the first pass to the fifth pass of reversing rolling process, the crown controllability of bending force is gradually weakened. Base on analyzing the relationship among the main factors associated with roll-bending force in reversing multi-pass rolling, such as strip width and rolling force, a preset mathematic model of bending force is developed by genetic algorithm. The simulation data demonstrate that the relative deviation of flatness criterions in each rolling pass is improved significantly and the mean relative deviation of all five passes is decreased from 25.1% to 1.7%. The model can keep good shape in multi-pass reversing cold rolling process with the high prediction accuracy and can be used to guide the production process.
基金Projects(60404003,11202230)supported by the National Natural Science Foundation of China
文摘The application of new-designed levitation controller requires extensive validation prior to enter into commercial service. However, huge mounts of approximations and assumptions lead the theoretical analysis away from the engineering practice. The experimental methods are time-consuming and financial expensive, even unrealizable due to the lack of suitable sensors. Numerical simulations can bridge the gap between the theoretical analysis and experimental techniques. A complete overall dynamic model of maglev levitation system is derived in this work, which includes the simple-supported bridges, the calculation of electromagnetic force with more details, the stress of levitation modules and the cabin. Based on the aforementioned model, it shows that the inherent nonlinearity, inner coupling, misalignments between the sensors and actuators, and self-excited vibration are the main issues that should be considered during the design process of controller. Then, the backstepping controller based on the mathematical model of the module with reasonable simplifications is proposed, and the stability proofs are listed. To show the advantage of controller, two numerical simulation experiments are carried out. Finally, the results illustrating closed-loop performance are provided.
基金Projects(51205335,51375411)supported by the National Natural Science Foundation of ChinaProjects(2013J01209,2012J01237)supported by the Natural Science Foundation of Fujian Province,China+2 种基金Project(2014H0049)supported by the Major S&T Program of Fujian Province,ChinaProject(E201400800)supported by the International Cooperation and Exchange Research Plan of Xiamen University of Technology,ChinaProject(YKJ14008R)supported by the Scientific Research for the High Level Talent of Xiamen University of Technology,China
文摘A mathematical model of gear tooth profiles using the ellipse curve, whose curvature is convenient to control by changing the mathematical parameters as its line of action, was built based on the meshing theory. The equation of undercutting condition was derived from the model. A special epicycloidal tooth profile was also presented. An example gear drive with variation of the ellipse parameters was taken to illustrate the proposed method. The contact ratio of the gear drive designed by the proposed method was analyzed. A comparison of the property of the gear drive designed with the involute gear drive was also carried out. The results confirm that the proposed gear drive has higher contact ratio in comparison with the involute gear drive.
