期刊文献+
共找到8篇文章
< 1 >
每页显示 20 50 100
基于子系统划分和注入电流比的配电网故障定位方法 被引量:13
1
作者 李浩 张禄亮 +2 位作者 栾云飞 单海婷 莫春 《电力系统保护与控制》 EI CSCD 北大核心 2023年第8期63-72,共10页
针对配电网因结构复杂、分支众多而难以实现准确故障定位的问题,提出了一种基于子系统划分和注入电流比的配电网故障定位方法。首先,根据末端节点数将配电网划分成若干相互独立的子系统,并在任意子系统内计算首末端节点的等效虚拟注入电... 针对配电网因结构复杂、分支众多而难以实现准确故障定位的问题,提出了一种基于子系统划分和注入电流比的配电网故障定位方法。首先,根据末端节点数将配电网划分成若干相互独立的子系统,并在任意子系统内计算首末端节点的等效虚拟注入电流,继而可得故障点的注入电流。然后,假设将该电流在各子系统的不同节点分别注入,根据末端节点电压计算值与实测值的误差大小确定故障子系统。最后,在故障子系统内,利用首末端节点注入电流比与真实故障点的位置关系进行故障定位。所提方法仅需在首末端节点配置微型同步相量测量单元,具有较好的经济性。经Matlab/Simulink仿真测试,所提方法不仅受故障类型、过渡电阻、故障位置、初相角的影响较小,而且对负荷变化和噪声不敏感。 展开更多
关键词 配电网 子系统划分 注入电流比 故障子系统 微型同步相量测量单元 故障定位
在线阅读 下载PDF
自动售货机故障管理子系统的设计实现 被引量:5
2
作者 宋晓峰 厉小军 +2 位作者 邓阿群 俞蒙槐 胡上序 《计算机工程》 CAS CSCD 北大核心 2002年第5期8-10,共3页
详细介绍了采用对自动售货机故障管理子系统进行设计和实现的全过程。说明了在面向对象软件开发中的实用性。
关键词 自动售货机 故障管理子系统 设计
在线阅读 下载PDF
数控机床的自诊断功能与冷却子系统的故障诊断 被引量:6
3
作者 卢庆林 贺天怀 《组合机床与自动化加工技术》 2008年第6期62-64,共3页
数控机床的自诊断功能是确定机床故障原因的最常用也是最有效方法。文章介绍了数控机床的硬件报警功能、自诊断及自修复系统以及附属子系统的集中控制和故障集中诊断等功能,并通过具体故障和维修实例,充分利用系统的报警信息和自诊断功... 数控机床的自诊断功能是确定机床故障原因的最常用也是最有效方法。文章介绍了数控机床的硬件报警功能、自诊断及自修复系统以及附属子系统的集中控制和故障集中诊断等功能,并通过具体故障和维修实例,充分利用系统的报警信息和自诊断功能,灵活应用数控机床故障的常规处理方法,实现对机床冷却子系统故障的快速诊断与故障维修。 展开更多
关键词 数控机床 自诊断功能 冷却子系统故障 报警不消除
在线阅读 下载PDF
基于PC104线路智能识别系统
4
作者 杨钰 梁晓阳 吴剑秋 《电子测量技术》 2003年第5期10-11,共2页
介绍一种智能型线路识别系统的功能及工作原理,给出硬件电路的设计及软件流程,实现对电子系统线路故障进行现场分析与测试。
关键词 PC104线路 智能识别系统 工作原理 硬件电路 子系统线路故障
在线阅读 下载PDF
应用ACE解决TMN故障管理中并发操作的方案
5
作者 江涛 黄爱苹 《计算机工程》 EI CAS CSCD 北大核心 2006年第2期260-262,共3页
利用ACE在线程创建和管理方面的优势,探讨应用多线程模式解决电信管理网告警预处理中接收当前告警和回查丢失告警的并发操作问题,并分析3种不同解决方案的优劣。还介绍了运用ACE反应堆组件创建负责告警分派的事件处理器。
关键词 电信管理网 故障管理子系统 自适应通信环境 主动对象 任务 反应堆
在线阅读 下载PDF
网络诊断研究
6
作者 孙义闯 《电讯技术》 北大核心 1990年第5期31-37,共7页
本文提出了多种新的故障定值和定位方法,系统地阐述了网络诊断理论,以及网络诊断与网络分析和网络综合之间的关系.
关键词 子系统自动故障诊断 模拟网络故障诊断
在线阅读 下载PDF
System failure analysis based on DEMATEL–ISM and FMECA 被引量:2
7
作者 申桂香 孙曙光 +3 位作者 张英芝 王志琼 陈炳锟 马闯 《Journal of Central South University》 SCIE EI CAS 2014年第12期4518-4525,共8页
A new method of system failure analysis was proposed. First, considering the relationships between the failure subsystems,the decision making trial and evaluation laboratory(DEMATEL) method was used to calculate the d... A new method of system failure analysis was proposed. First, considering the relationships between the failure subsystems,the decision making trial and evaluation laboratory(DEMATEL) method was used to calculate the degree of correlation between the failure subsystems, analyze the combined effect of related failures, and obtain the degree of correlation by using the directed graph and matrix operations. Then, the interpretative structural modeling(ISM) method was combined to intuitively show the logical relationship of many failure subsystems and their influences on each other by using multilevel hierarchical structure model and obtaining the critical subsystems. Finally, failure mode effects and criticality analysis(FMECA) was used to perform a qualitative hazard analysis of critical subsystems, determine the critical failure mode, and clarify the direction of reliability improvement.Through an example, the result demonstrates that the proposed method can be efficiently applied to system failure analysis problems. 展开更多
关键词 system failure analysis related failure decision making and evaluation laboratory-interpretative structural modeling(DEMATEL-ISM) failure mode effects and criticality analysis(FMECA)
在线阅读 下载PDF
Fault detection and identification for dead reckoning system of mobile robot based on fuzzy logic particle filter 被引量:4
8
作者 余伶俐 蔡自兴 +1 位作者 周智 奉振球 《Journal of Central South University》 SCIE EI CAS 2012年第5期1249-1257,共9页
To deal with fault detection and diagnosis with incomplete model for dead reckoning system of mobile robot,an integrative framework of particle filter detection and fuzzy logic diagnosis was devised.Firstly,an adaptiv... To deal with fault detection and diagnosis with incomplete model for dead reckoning system of mobile robot,an integrative framework of particle filter detection and fuzzy logic diagnosis was devised.Firstly,an adaptive fault space is designed for recognizing both known faults and unknown faults,in corresponding modes of modeled and model-free.Secondly,the particle filter is utilized to diagnose the modeled faults and detect model-free fault according to the low particle weight and reliability.Especially,the proposed fuzzy logic diagnosis can further analyze model-free modes and identify some soft faults in unknown fault space.The MORCS-1 experimental results show that the fuzzy diagnosis particle filter(FDPF) combinational framework improves fault detection and identification completeness.Specifically speaking,FDPF is feasible to diagnose the modeled faults in known space.Furthermore,the types of model-free soft faults can also be further identified and diagnosed in unknown fault space. 展开更多
关键词 fault detection and diagnosis particle filter fuzzy logic hard fault soft fault
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部