期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
三层共挤聚烯烃热收缩薄膜的时延效应 被引量:7
1
作者 温绍国 周持兴 +1 位作者 梁志明 王松尧 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2002年第6期190-192,共3页
考察了储存时间对聚烯烃热收缩薄膜 ( POSF)综合性能的影响 ,研究发现 ,随储存时间增加 ,( 1)POSF的热收缩速率 ( v SR)递减 ,但热收缩率 ( SR)基本不变 ;( 2 )摩擦系数 ( COF)历经迅速降低后缓慢增加 ,直至稳定。
关键词 三层共挤 聚烯烃 收缩 收缩 收缩速率 摩擦系数 时延效应
在线阅读 下载PDF
动脉收缩压上升速率与血压间的关系及其临床意义
2
作者 鄢建勤 蔡宏伟 任飞 《湖南医科大学学报》 CSCD 2000年第4期336-336,346,共2页
关键词 动脉 收缩压上升速率 评价研究
全文增补中
Al含量对Mg-Al亚共晶合金热收缩行为的影响 被引量:1
3
作者 蒙毅 杨越 +3 位作者 曹雷刚 孙健 张海涛 崔建忠 《材料导报》 EI CAS CSCD 北大核心 2018年第18期3185-3189,共5页
利用一种可使合金在凝固冷却过程中实现近似一维收缩的实验装置,以纯镁及含Al量分别为1.1%、3%和5%(质量分数)的二元亚共晶镁合金为研究对象,检测其在凝固冷却过程中自由收缩时的冷却曲线及一维收缩量的变化,旨在获得纯镁及这三种Mg-Al... 利用一种可使合金在凝固冷却过程中实现近似一维收缩的实验装置,以纯镁及含Al量分别为1.1%、3%和5%(质量分数)的二元亚共晶镁合金为研究对象,检测其在凝固冷却过程中自由收缩时的冷却曲线及一维收缩量的变化,旨在获得纯镁及这三种Mg-Al二元亚共晶合金的热收缩规律,估算合金在低温区间的平均线膨胀系数,最终实现对这几种合金热收缩行为的系统表征。结果表明,Mg-Al合金铸件凝固过程中收缩速率随温度降低先增大后减小,其最大收缩速率vl,max随含Al量的增加(0%~5%)而降低,但降低幅度逐渐减小。当铸件完全凝固后,每一种合金在其对应的某一高温区间内(高温固态收缩阶段)均存在固态收缩速率随冷却温度降低先增大后减小的现象,而所有铸件在低温固态收缩阶段均表现为线性匀速收缩(固态收缩速率趋于一恒定值)。Mg-Al合金铸件在低温收缩阶段(<400℃)的固态平均线膨胀系数随含Al量的增加(0%~5%)而增加。 展开更多
关键词 镁合金 亚共晶 收缩 铝含量 收缩速率
在线阅读 下载PDF
肌肉收缩中横桥间的协作行为(英文)
4
作者 胡锋 蔡勖 《中国科学院研究生院学报》 CAS CSCD 2002年第4期382-387,共6页
根据横桥模型,肌肉中的横桥分子对细纤丝的周期性作功导致肌肉收缩,研究了在一维情况下,肌肉等张收缩(即外界的负荷F是常量)时,其横桥分子间的两种协作行为。首先,假设了单个横桥分子在作功过程中的能量与时间关系。在此基础上,考察了... 根据横桥模型,肌肉中的横桥分子对细纤丝的周期性作功导致肌肉收缩,研究了在一维情况下,肌肉等张收缩(即外界的负荷F是常量)时,其横桥分子间的两种协作行为。首先,假设了单个横桥分子在作功过程中的能量与时间关系。在此基础上,考察了横桥分子间的两种协作行为:(1 )n0 个处于接触状态的横桥分子同步的工作,其作功过程与外界影响无关;(2 )n0 个处于接触状态的横桥分子同步的工作,但它们作功的频率正比于细纤丝在肌肉收缩中的速率V。计算了这两种假设情况下肌肉的外界负荷F与其收缩速率V的关系。发现,在第一种情况下,F V的关系曲线形状上类似于实验上得到的希尔曲线;在第二种情况下,肌肉收缩的速率V反比于外界负荷F。 展开更多
关键词 肌肉收缩 分子马达 协作行为 横桥模型 周期性作用 横桥分子 收缩速率
在线阅读 下载PDF
Dual solutions of MHD stagnation point flow and heat transfer over a stretching/shrinking sheet with generalized slip condition 被引量:3
5
作者 ABBAS Zaheer MASOOD Tahmina OLANREWAJU Philip Oladapo 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第6期2376-2384,共9页
An analysis was made to study the steady momentum and heat transfer characteristics of a viscous electrically conducting fluid near a stagnation point due to a stretching/shrinking sheet in the presence of a transvers... An analysis was made to study the steady momentum and heat transfer characteristics of a viscous electrically conducting fluid near a stagnation point due to a stretching/shrinking sheet in the presence of a transverse magnetic field and generalized slip condition. Two flow problems corresponding to the planar and axisymmetric stretching/shrinking sheet were considered. By means of similarity transformations, the obtained resultant nonlinear ordinary differential equations were solved numerically using a shooting method for dual solutions of velocity and temperature profiles. Some important physical features of the flow and heat transfer in terms of the fluid velocity, the temperature distribution, the skin friction coefficient and the local Nusselt number for various values of the controlling governing parameters like velocity slip parameter, critical shear rate, magnetic field, ratio of stretching/shrinking rate to external flow rate and Prandtl number were analyzed and discussed. An increase of the critical shear rate decreases the fluid velocity whereas the local Nusselt number increases. The comparison of the present numerical results with the existing literature in a limiting case is given and found to be in an excellent agreement. 展开更多
关键词 dual solutions stagnation-point MHD flow slip condition heat transfer numerical solution transverse magnetic fields
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部