In high-resolution cone-beam computed tomography （CBCT） using the flat-panel detector, imperfect or defect detector elements cause ring artifacts due to the none-uniformity of their X-ray response. They often distur...In high-resolution cone-beam computed tomography （CBCT） using the flat-panel detector, imperfect or defect detector elements cause ring artifacts due to the none-uniformity of their X-ray response. They often disturb the image quality. A dedicated fitting correction method for high-resolution micro-CT is presented. The method converts each elementary X-ray response curve to an average one, and eliminates response inconsistency among pixels. Other factors of the method are discussed, such as the correction factor variability by different sampling frames and nonlinear factors over the whole spectrum. Results show that the noise and artifacts are both reduced in reconstructed images展开更多
In order to detect fault exactly and quickly, cusp catastrophe theory is used to interpret 3D coal seismic data in this paper. By establishing a cusp model, seismic signal is transformed into standard form of cusp cat...In order to detect fault exactly and quickly, cusp catastrophe theory is used to interpret 3D coal seismic data in this paper. By establishing a cusp model, seismic signal is transformed into standard form of cusp catastrophe and catastrophe parameters, including time-domain catastrophe potential, time-domain catastrophe time, frequency-domain catastrophe potential and frequency- domain degree, are calculated. Catastrophe theory is used in 3D seismic structural interpretation in coal mine. The results show that the position of abnormality of the catastrophe parameter profile or curve is related to the location of fault, and the cusp catastrophe theory is effective to automatically pick up geology information and improve the interpretation precision in 3D seismic data.展开更多
A relational matching approach for imagery-to-GIS data is presented. This method applies image aspect interpretation and geospatial data mining techniques to realize their integration. Three-dimensional （3D） primiti...A relational matching approach for imagery-to-GIS data is presented. This method applies image aspect interpretation and geospatial data mining techniques to realize their integration. Three-dimensional （3D） primitives, standing for houses, are chosen and their projections are represented by these aspects. The hierarchy aspect graphs are constructed to represent their intercon- nected relations. In this connection arcs are described by attribute data via formulated coding regulations. The nodes of the graph represent image features and their attributes can contain measurements on these features. The arcs of the graph represent relations between features and their attributes can contain measurements on spatial relations. Data mining is used to discover the semantic relationship of these primitives. Aerial images are interpreted via these aspects and geospatial data mining. Our experimental results demonstrate that the method oresented is cat）able of effectively interoreting aerial images and extracting high accuracv from the DBM （digital building model） at a rate of 87%.展开更多
All coal mine disasters are dynamic geological phenomenon and affected by many factors. However, locating the enriched areas of CSM (coal seam methane) may be the precondition for the successful prediction of such dis...All coal mine disasters are dynamic geological phenomenon and affected by many factors. However, locating the enriched areas of CSM (coal seam methane) may be the precondition for the successful prediction of such disasters. Traditional methods of investigating CSM enriched areas use limited data and only consider a few important factors. Their success rate is low and cannot meet practical needs. In this paper, an alternative method is proposed. The proce- dure is given as follows: 1) fracture attributes derived from azimuth variations of P-wave data in coal seams and wall rocks can be extracted; 2) AVO attributes, such as the intercept P and gradient G parameters can be extracted from different azimuths from 3D seismic data; 3) seismic cubes can be inverted and the relative attributes of imped- ance cubes can be extracted; 4) using a GIS platform, multi-source information can be obtained and analyzed; these include fracture attributes of coal seams and wall rocks, the thickness of coal seams, the distribution of faults and structures, the depth of coal seams, the inclination and exposure of coal seams and the coal rank. Through this processing procedure, methane enriched areas can be systematically detected.展开更多
The present paper investigates the application of high resolution magnetic survey to detecting igneous bodies. The slight difference in magnetism between igneous bodies and their surrounding rocks is measured first an...The present paper investigates the application of high resolution magnetic survey to detecting igneous bodies. The slight difference in magnetism between igneous bodies and their surrounding rocks is measured first and then the magnetic survey data are processed to determine whether there exist igneous bodies by analog among several measuring lines, and finally the modified Marquart inversion was used to determine the occurrence and distribution of the igneous bodies.展开更多
A convenient numerical calculation method (inverse spline interpolation) for all-time apparent resistivity intransient electromagnetic method (TEM) is proposed in this paper. Characteristic of early and late normalize...A convenient numerical calculation method (inverse spline interpolation) for all-time apparent resistivity intransient electromagnetic method (TEM) is proposed in this paper. Characteristic of early and late normalized inductiveelectromotive force was investigated. According to the turning point, the transient process is divided into the earlyphase, the turning point, and the late phase. Afterwards, apparent resistivity is obtained through inverse spline interpo-lation in the early and the late phases, respectively. Finally, the resistivities of the early-time and the late-time wereconnected together by the turning point. The result shows that the inverse spline method is feasible and the method alsolays a foundation for initial model construction in the TEM automatic inversion.展开更多
In this paper we present two strategies of AUV (Autonomous Underwater Vehicle) region detection and an approach to decompose the detection region according to the direction of the ocean current. In the task of local d...In this paper we present two strategies of AUV (Autonomous Underwater Vehicle) region detection and an approach to decompose the detection region according to the direction of the ocean current. In the task of local detection and identification, the algorithm against the ocean current was proposed. In the tasks of closing obstacle, going back or moving, the fuzzy logic theory was used to solve the effect of ocean current. In one of our strategies the concept of weighted journey based on the angle between heading and ocean current is suggested and the TSP's exact optimal result is utilized to solve the global path planning. Simulations demonstrate the feasibility of this approach.展开更多
Aiming at the characteristics of the seismic exploration signals, the paper studies the image coding technology, the coding standard and algorithm, brings forward a new scheme of admixing coding for seismic data compr...Aiming at the characteristics of the seismic exploration signals, the paper studies the image coding technology, the coding standard and algorithm, brings forward a new scheme of admixing coding for seismic data compression. Based on it, a set of seismic data compression software has been developed.展开更多
Based on first-hand material from the geological exploration of petroleum,we made a detailed study of the tectonic development in the Early Cretaceous and the distribution of basement rifts in the Songliao Basin.The s...Based on first-hand material from the geological exploration of petroleum,we made a detailed study of the tectonic development in the Early Cretaceous and the distribution of basement rifts in the Songliao Basin.The sedimentary characteristics of this epoch and the tectono-paleogeography of the basin were expounded.The results show that in its early stages,the Songliao Basin was characterized by a detached faulted basin in which mainly lake facies developed among mountains.It became gradually one lake during the late stages of the Early Cretaceous.During this period,the fault activity in the Songliao Basin changed from a turbulent to a quiet development,the water area from small separated lakes to one large lake,in which the sedimentary facies were divided into asymmetric eastern and western parts.In the basin a volcanic clastic rock-alluvial fan system developed and a fan delta-lake-small delta-river system was mainly deposired.Our research also shows that the basement rifts not only controlled the distribution of fault depressions and the tectonic development in the Early Cretaceous,but had also an effect on the orientation of sedimentation,source area and river system,which determine the tectonopaleogeography of the Early Cretaceous.展开更多
In industrial X-ray inspection, in order to identify weld defects automatically, raise the identification ratio, and avoid processing of complex background, it is an important step for sequent processing to extract we...In industrial X-ray inspection, in order to identify weld defects automatically, raise the identification ratio, and avoid processing of complex background, it is an important step for sequent processing to extract weld from the image. According to the characteristics of weld radiograph image, median filter is adopted to reduce the noise with high frequency, then relative gray-scale of image is chosen as fuzzy characteristic, and image gray-scale fuzzy matrix is constructed and suitable membership function is selected to describe edge characteristic. A fuzzy algorithm is adopted for enhancing radiograph image processing. Based on the intensity distribution characteristic in weld, methodology of weld extraction is then designed. This paper describes the methodology of all the weld extraction, including reducing noise, fuzzy enhancement and weld extraction process. To prove its effectiveness, this methodology was tested with 64 weld negative images available for this study. The experimental results show that this methodology is very effective for extracting linear weld.展开更多
Secure storage yard is one of the optimal core goals of container transportation;thus,making the necessary storage arrangements has become the most crucial part of the container terminal management systems（CTMS）.Thi...Secure storage yard is one of the optimal core goals of container transportation;thus,making the necessary storage arrangements has become the most crucial part of the container terminal management systems（CTMS）.This paper investigates a random hybrid stacking algorithm（RHSA） for outbound containers that randomly enter the yard.In the first stage of RHSA,the distribution among blocks was analyzed with respect to the utilization ratio.In the second stage,the optimization of bay configuration was carried out by using the hybrid genetic algorithm.Moreover,an experiment was performed to test the RHSA.The results show that the explored algorithm is useful to increase the efficiency.展开更多
Image segment is a primary step in image analysis of unexploded ordnance (UXO) detection by ground p enetrating radar (GPR) sensor which is accompanied with a lot of noises and other elements that affect the recogniti...Image segment is a primary step in image analysis of unexploded ordnance (UXO) detection by ground p enetrating radar (GPR) sensor which is accompanied with a lot of noises and other elements that affect the recognition of real target size. In this paper we bring forward a new theory, that is, we look the weight sets as target vector sets which is the new cues in semi-automatic segmentation to form the final image segmentation. The experiment results show that the measure size of target with our method is much smaller than the size with other methods and close to the real size of target.展开更多
Objective: To study the effective computerized image processing of underexposed and overexposed X-rays of bones and joints. Methods: Ninety-nine conventional X-ray images (82 were overexposed and 17 were underexposed)...Objective: To study the effective computerized image processing of underexposed and overexposed X-rays of bones and joints. Methods: Ninety-nine conventional X-ray images (82 were overexposed and 17 were underexposed),scanned by an UMAX Astra 4000U Scanner, were converted into digital images on the basis of their analog images. A computerized imaging processing program consisting of five functional modules such as Contrast Stretch, Fast Flourier Transform (FFT), Image Smoothing Modules, Inverse Fast Flourier Transform (IFFT) and Nonlinear Transform performed image contrast stretch and smoothing. Three senior doctors from hospital image sections made their evaluation of all the processed images. Results: Of 82 overexposed films, 71 met the clinical requirements after image processing, and 11 were unable to be applied to clinical diagnosis, accounting for 87% and 13% respectively. Of the other 17 underexposed X-ray images, 11 met the clinical requirements while 6 were not, making a percentage of 64 and 35. Conclusion: Image contrast stretch and smoothing processing are significantly effective on conventional X-ray images which were inappropriately exposed, and can avoid more X-ray radiation caused by handling of radiological photograph again. This method can decrease hospital cost and provide acute and effective X-ray examinations for the treatment and cure for critical patients.展开更多
In this paper, we propose the statistical space mapping thought and classify the seismic body space throughlithology space clustering combining to the actual application background of petroleum exploration. A new meth...In this paper, we propose the statistical space mapping thought and classify the seismic body space throughlithology space clustering combining to the actual application background of petroleum exploration. A new method ofstratum petroleum recognition based on neural network was set up through the foundation of the data mapping relationbetween log and seismic body. It can break a new path for recognition petroleum using both log and seismic data. Andthis method has been validated in the practical data analysis in Liaohe oil field.展开更多
In recent years, the retired veteran cadres have grown older and older, and their numbers have also increased year by year. In this case, how to maintain the physical and mental health of empty nest veteran cadre, and...In recent years, the retired veteran cadres have grown older and older, and their numbers have also increased year by year. In this case, how to maintain the physical and mental health of empty nest veteran cadre, and further improve the quality of their life has been a realistic problem many primary health care doctors have to face and solve.展开更多
Either amplitude based methods or phase based methods are usually used in multibeam bathymetry system and chosen in practical measurement by ad hoc criteria. The errors of the detection are often caused by choosing wr...Either amplitude based methods or phase based methods are usually used in multibeam bathymetry system and chosen in practical measurement by ad hoc criteria. The errors of the detection are often caused by choosing wrong detection method. In this paper a modified multiple subarrays amplitude-phase united detection method is proposed , which uses both the amplitude and phase of echo from bottom.This new method not only realizes the super-wide swath coverage, but also improves the detection performance by using the phase differences among subarrays in place of phases of subarrays to estimate the phase slope image. Experimental results are also analyzed and discussed to demonstrate the effectivity of the proposed approach.展开更多
基金Supported by the National Basic Research Program of China ("973"Program)(2006CB601201)~~
文摘In high-resolution cone-beam computed tomography （CBCT） using the flat-panel detector, imperfect or defect detector elements cause ring artifacts due to the none-uniformity of their X-ray response. They often disturb the image quality. A dedicated fitting correction method for high-resolution micro-CT is presented. The method converts each elementary X-ray response curve to an average one, and eliminates response inconsistency among pixels. Other factors of the method are discussed, such as the correction factor variability by different sampling frames and nonlinear factors over the whole spectrum. Results show that the noise and artifacts are both reduced in reconstructed images
文摘In order to detect fault exactly and quickly, cusp catastrophe theory is used to interpret 3D coal seismic data in this paper. By establishing a cusp model, seismic signal is transformed into standard form of cusp catastrophe and catastrophe parameters, including time-domain catastrophe potential, time-domain catastrophe time, frequency-domain catastrophe potential and frequency- domain degree, are calculated. Catastrophe theory is used in 3D seismic structural interpretation in coal mine. The results show that the position of abnormality of the catastrophe parameter profile or curve is related to the location of fault, and the cusp catastrophe theory is effective to automatically pick up geology information and improve the interpretation precision in 3D seismic data.
基金Projects 40574008 supported by the National Natural Science Foundation of China0131893 by the US National Science Foundation
文摘A relational matching approach for imagery-to-GIS data is presented. This method applies image aspect interpretation and geospatial data mining techniques to realize their integration. Three-dimensional （3D） primitives, standing for houses, are chosen and their projections are represented by these aspects. The hierarchy aspect graphs are constructed to represent their intercon- nected relations. In this connection arcs are described by attribute data via formulated coding regulations. The nodes of the graph represent image features and their attributes can contain measurements on these features. The arcs of the graph represent relations between features and their attributes can contain measurements on spatial relations. Data mining is used to discover the semantic relationship of these primitives. Aerial images are interpreted via these aspects and geospatial data mining. Our experimental results demonstrate that the method oresented is cat）able of effectively interoreting aerial images and extracting high accuracv from the DBM （digital building model） at a rate of 87%.
基金Project 40574057 supported by the National Natural Science Foundation of China and CUMT Youth Foundation
文摘All coal mine disasters are dynamic geological phenomenon and affected by many factors. However, locating the enriched areas of CSM (coal seam methane) may be the precondition for the successful prediction of such disasters. Traditional methods of investigating CSM enriched areas use limited data and only consider a few important factors. Their success rate is low and cannot meet practical needs. In this paper, an alternative method is proposed. The proce- dure is given as follows: 1) fracture attributes derived from azimuth variations of P-wave data in coal seams and wall rocks can be extracted; 2) AVO attributes, such as the intercept P and gradient G parameters can be extracted from different azimuths from 3D seismic data; 3) seismic cubes can be inverted and the relative attributes of imped- ance cubes can be extracted; 4) using a GIS platform, multi-source information can be obtained and analyzed; these include fracture attributes of coal seams and wall rocks, the thickness of coal seams, the distribution of faults and structures, the depth of coal seams, the inclination and exposure of coal seams and the coal rank. Through this processing procedure, methane enriched areas can be systematically detected.
文摘The present paper investigates the application of high resolution magnetic survey to detecting igneous bodies. The slight difference in magnetism between igneous bodies and their surrounding rocks is measured first and then the magnetic survey data are processed to determine whether there exist igneous bodies by analog among several measuring lines, and finally the modified Marquart inversion was used to determine the occurrence and distribution of the igneous bodies.
基金Project 40344022 supported by National Natural Science Foundation of China
文摘A convenient numerical calculation method (inverse spline interpolation) for all-time apparent resistivity intransient electromagnetic method (TEM) is proposed in this paper. Characteristic of early and late normalized inductiveelectromotive force was investigated. According to the turning point, the transient process is divided into the earlyphase, the turning point, and the late phase. Afterwards, apparent resistivity is obtained through inverse spline interpo-lation in the early and the late phases, respectively. Finally, the resistivities of the early-time and the late-time wereconnected together by the turning point. The result shows that the inverse spline method is feasible and the method alsolays a foundation for initial model construction in the TEM automatic inversion.
基金Supported by the Research Fund for the Doctoral Program of Higher Education from the Ministry of Education
文摘In this paper we present two strategies of AUV (Autonomous Underwater Vehicle) region detection and an approach to decompose the detection region according to the direction of the ocean current. In the task of local detection and identification, the algorithm against the ocean current was proposed. In the tasks of closing obstacle, going back or moving, the fuzzy logic theory was used to solve the effect of ocean current. In one of our strategies the concept of weighted journey based on the angle between heading and ocean current is suggested and the TSP's exact optimal result is utilized to solve the global path planning. Simulations demonstrate the feasibility of this approach.
文摘Aiming at the characteristics of the seismic exploration signals, the paper studies the image coding technology, the coding standard and algorithm, brings forward a new scheme of admixing coding for seismic data compression. Based on it, a set of seismic data compression software has been developed.
文摘Based on first-hand material from the geological exploration of petroleum,we made a detailed study of the tectonic development in the Early Cretaceous and the distribution of basement rifts in the Songliao Basin.The sedimentary characteristics of this epoch and the tectono-paleogeography of the basin were expounded.The results show that in its early stages,the Songliao Basin was characterized by a detached faulted basin in which mainly lake facies developed among mountains.It became gradually one lake during the late stages of the Early Cretaceous.During this period,the fault activity in the Songliao Basin changed from a turbulent to a quiet development,the water area from small separated lakes to one large lake,in which the sedimentary facies were divided into asymmetric eastern and western parts.In the basin a volcanic clastic rock-alluvial fan system developed and a fan delta-lake-small delta-river system was mainly deposired.Our research also shows that the basement rifts not only controlled the distribution of fault depressions and the tectonic development in the Early Cretaceous,but had also an effect on the orientation of sedimentation,source area and river system,which determine the tectonopaleogeography of the Early Cretaceous.
文摘In industrial X-ray inspection, in order to identify weld defects automatically, raise the identification ratio, and avoid processing of complex background, it is an important step for sequent processing to extract weld from the image. According to the characteristics of weld radiograph image, median filter is adopted to reduce the noise with high frequency, then relative gray-scale of image is chosen as fuzzy characteristic, and image gray-scale fuzzy matrix is constructed and suitable membership function is selected to describe edge characteristic. A fuzzy algorithm is adopted for enhancing radiograph image processing. Based on the intensity distribution characteristic in weld, methodology of weld extraction is then designed. This paper describes the methodology of all the weld extraction, including reducing noise, fuzzy enhancement and weld extraction process. To prove its effectiveness, this methodology was tested with 64 weld negative images available for this study. The experimental results show that this methodology is very effective for extracting linear weld.
基金Supported by the Research Grants from Shanghai Municipal Natural Science Foundation（No.10190502500） Shanghai Maritime University Start-up Funds,Shanghai Science＆Technology Commission Projects（No.09DZ2250400） Shanghai Education Commission Project（No.J50604）
文摘Secure storage yard is one of the optimal core goals of container transportation;thus,making the necessary storage arrangements has become the most crucial part of the container terminal management systems（CTMS）.This paper investigates a random hybrid stacking algorithm（RHSA） for outbound containers that randomly enter the yard.In the first stage of RHSA,the distribution among blocks was analyzed with respect to the utilization ratio.In the second stage,the optimization of bay configuration was carried out by using the hybrid genetic algorithm.Moreover,an experiment was performed to test the RHSA.The results show that the explored algorithm is useful to increase the efficiency.
基金Supported by the Natural Science Foundation of Heilongjiang Province (F0201)
文摘Image segment is a primary step in image analysis of unexploded ordnance (UXO) detection by ground p enetrating radar (GPR) sensor which is accompanied with a lot of noises and other elements that affect the recognition of real target size. In this paper we bring forward a new theory, that is, we look the weight sets as target vector sets which is the new cues in semi-automatic segmentation to form the final image segmentation. The experiment results show that the measure size of target with our method is much smaller than the size with other methods and close to the real size of target.
文摘Objective: To study the effective computerized image processing of underexposed and overexposed X-rays of bones and joints. Methods: Ninety-nine conventional X-ray images (82 were overexposed and 17 were underexposed),scanned by an UMAX Astra 4000U Scanner, were converted into digital images on the basis of their analog images. A computerized imaging processing program consisting of five functional modules such as Contrast Stretch, Fast Flourier Transform (FFT), Image Smoothing Modules, Inverse Fast Flourier Transform (IFFT) and Nonlinear Transform performed image contrast stretch and smoothing. Three senior doctors from hospital image sections made their evaluation of all the processed images. Results: Of 82 overexposed films, 71 met the clinical requirements after image processing, and 11 were unable to be applied to clinical diagnosis, accounting for 87% and 13% respectively. Of the other 17 underexposed X-ray images, 11 met the clinical requirements while 6 were not, making a percentage of 64 and 35. Conclusion: Image contrast stretch and smoothing processing are significantly effective on conventional X-ray images which were inappropriately exposed, and can avoid more X-ray radiation caused by handling of radiological photograph again. This method can decrease hospital cost and provide acute and effective X-ray examinations for the treatment and cure for critical patients.
文摘In this paper, we propose the statistical space mapping thought and classify the seismic body space throughlithology space clustering combining to the actual application background of petroleum exploration. A new method ofstratum petroleum recognition based on neural network was set up through the foundation of the data mapping relationbetween log and seismic body. It can break a new path for recognition petroleum using both log and seismic data. Andthis method has been validated in the practical data analysis in Liaohe oil field.
文摘In recent years, the retired veteran cadres have grown older and older, and their numbers have also increased year by year. In this case, how to maintain the physical and mental health of empty nest veteran cadre, and further improve the quality of their life has been a realistic problem many primary health care doctors have to face and solve.
基金Sponsored by Foundation of Underwater Acous-tic Technology National Key Lab(No.51445030205ZS2301) Foundation of the Chinese Postdoctoral Science ( No.LRB00025).
文摘Either amplitude based methods or phase based methods are usually used in multibeam bathymetry system and chosen in practical measurement by ad hoc criteria. The errors of the detection are often caused by choosing wrong detection method. In this paper a modified multiple subarrays amplitude-phase united detection method is proposed , which uses both the amplitude and phase of echo from bottom.This new method not only realizes the super-wide swath coverage, but also improves the detection performance by using the phase differences among subarrays in place of phases of subarrays to estimate the phase slope image. Experimental results are also analyzed and discussed to demonstrate the effectivity of the proposed approach.
