期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
曲线驱动的网格变形算法与应用 被引量:2
1
作者 刘斌 林俊义 江开勇 《中国机械工程》 EI CAS CSCD 北大核心 2010年第18期2218-2223,共6页
提出了一种曲线驱动的网格变形方法并把其应用于鞋楦的设计系统。基于三角网格模型的拓扑邻接信息,快速提取截面轮廓曲线;由主曲率极值法提取模型特征点集,利用移动最小二乘法细化该点集并对其进行排序、稀疏,然后将细化后的点集拟合为... 提出了一种曲线驱动的网格变形方法并把其应用于鞋楦的设计系统。基于三角网格模型的拓扑邻接信息,快速提取截面轮廓曲线;由主曲率极值法提取模型特征点集,利用移动最小二乘法细化该点集并对其进行排序、稀疏,然后将细化后的点集拟合为B样条曲线。计算曲线上采样点与模型上的对应点,从而使曲线与模型相关联,通过交互编辑截面轮廓曲线或特征曲线等来实现鞋楦的再设计。最后给出了该方法在鞋楦CAD系统中的功能实现。 展开更多
关键词 鞋楦 定制CAD 拉普拉斯网格变形 特征线
在线阅读 下载PDF
单张图片自动重建带几何细节的人脸形状 被引量:4
2
作者 王涵 夏时洪 《计算机辅助设计与图形学学报》 EI CSCD 北大核心 2017年第7期1256-1266,共11页
为了从单张图片中自动快速重建高细节人脸表情模型,提出一种从粗到细逐步优化的方法.首先从单张照片检测到的特征点中,通过多初值迭代方法优化求解对应的三维头部姿态和大尺度的人脸表情;其次以检测到的人脸特征点为依据对不准确的人脸... 为了从单张图片中自动快速重建高细节人脸表情模型,提出一种从粗到细逐步优化的方法.首先从单张照片检测到的特征点中,通过多初值迭代方法优化求解对应的三维头部姿态和大尺度的人脸表情;其次以检测到的人脸特征点为依据对不准确的人脸表情进行矫正,并使用非刚性的迭代最近点方法对齐模型上的特征点和图像特征点,使用拉普拉斯坐标影响其余非特征点位置;最后使用带有常量假设的明暗重建形状方法为人脸模型重建细尺度的几何细节,以增加重建模型的逼真度.实验结果表明,文中方法能够在头部大幅度摆动的情况下生成更准确的带有几何细节的人脸模型;该方法不需要对图片的摄像机进行标定,也不需要预先训练或预设用户的特征模型和混合形状,同时不强制约束室内光照以及单调的背景环境. 展开更多
关键词 图像重建人脸模型 多线性模型方法 非刚性迭代最近点方法 拉普拉斯变形 明暗重建形状
在线阅读 下载PDF
基于扫描点云和标准参数的古建筑构件正逆向建模方法研究 被引量:14
3
作者 胡春梅 张方 《激光杂志》 北大核心 2018年第4期34-39,共6页
古建筑构件三维建模可采用正向和逆向两种方式,但目前两种方式都难以满足建立完整且具有现实形态模型的需求,针对这一问题,提出一种利用正逆向建模相结合的混合建模方法。首先应用激光扫描点云数据逆向建模得到构件现实模型,再利用标准... 古建筑构件三维建模可采用正向和逆向两种方式,但目前两种方式都难以满足建立完整且具有现实形态模型的需求,针对这一问题,提出一种利用正逆向建模相结合的混合建模方法。首先应用激光扫描点云数据逆向建模得到构件现实模型,再利用标准尺寸参数正向设计得到构件标准模型;以构件现实模型作为目标模型,通过模型配准和基于拉普拉斯坐标的形态变形算法,对构件标准模型进行变形后得到完整并具有现实形态的构件模型。采用故宫中和殿部分构件模型作为实验数据,实验结果证明了该方法的正确性和可行性,变形后模型表现细节较好,最终可得到完整且具有现实形态的古建筑构件模型。 展开更多
关键词 古建筑构件 三维重建 正逆向建模 拉普拉斯变形
在线阅读 下载PDF
Dynamic response of cylindrical cavity to anti-plane impact load by using analytical approach 被引量:4
4
作者 翟朝娇 夏唐代 +1 位作者 杜国庆 丁智 《Journal of Central South University》 SCIE EI CAS 2014年第1期405-415,共11页
The transient response of an unlimited cylindrical cavity buried in the infinite elastic soil subjected to an anti-plane impact load along the cavern axis direction was studied.Using Laplace transform combining with c... The transient response of an unlimited cylindrical cavity buried in the infinite elastic soil subjected to an anti-plane impact load along the cavern axis direction was studied.Using Laplace transform combining with contour integral of the Laplace inverse transform specifically,the general analytical expressions of the soil displacement and stress are obtained in the time domain,respectively.And the numerical solutions of the problem computed by analytical expressions are presented.In the time domain,the dynamic responses of the infinite elastic soil are analyzed,and the calculation results are compared with those from numerical inversion proposed by Durbin and the static results.One observes good agreement between analytical and numerical inversion results,lending the further support to the method presented.Finally,some valuable shear wave propagation laws are gained: the displacement of the soil remains zero before the wave arrival,and after the shear wave arrival,the stress and the displacement at this point increase abruptly,then reduce and tend to the static value gradually at last.The wave attenuates along the radial,therefore the farther the wave is from the source,the smaller the stress and the displacement are,and the stress and the displacement are just functions of the radial distance from the axis. 展开更多
关键词 cylindrical cavity ANTI-PLANE Laplace transform contour integral impact load dynamic responses
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部