O723 95021266碲镉汞晶体结构性质的电子显微术研究=Studyon the micro structure of Hg<sub>1-x</sub>Cd<sub>x</sub>Te crystalsby scanning electron microscopy[刊,中]/唐家钿,宋炳文,董先庆,欧明娣（昆明...O723 95021266碲镉汞晶体结构性质的电子显微术研究=Studyon the micro structure of Hg<sub>1-x</sub>Cd<sub>x</sub>Te crystalsby scanning electron microscopy[刊,中]/唐家钿,宋炳文,董先庆,欧明娣（昆明物理所.云南,昆明（650223））//红外技术.—1994,16（6）.—22—26采用扫描电子显微术对布里奇曼法。展开更多
In order to study reasonable sintering technological parameters and appropriate copper powder size range of micro heat pipe (MHP) with the sintered wick, the forming principle of copper powders in wicks and MHP's ...In order to study reasonable sintering technological parameters and appropriate copper powder size range of micro heat pipe (MHP) with the sintered wick, the forming principle of copper powders in wicks and MHP's heat transfer capabilities were first analyzed, then copper powders with different cell sizes and dispersions were sintered in RXL-12-11 resistance furnace under the protection of the hydrogen at different sintering temperatures for different durations of sintering time, and finally the sintered wicks' scanning electron microscope (SEM) images and their heat transfer capabilities were analyzed. The results indicate that the wick sintered with copper powders of larger cell size or smaller size range has better sintering properties and larger heat transfer capabilities; and that the increase of either sintering temperatures or sintering time also helps to improve the wick's sintering properties and heat transfer capabilities, and the former affects more obviously than the latter. Considering both its manufacturing cost and performance requirements, it is recommended that copper powders with the size range of 140-170 μm are sintered at 900-950℃ for 30-60 min in practical manufacturing. In addition, two approaches to improve wick's porosity are also proposed through theoretical analysis, which suggests that the larger the wick's porosity, the better the heat transfer capabilities of the MHP.展开更多
The surface morphology of alloy layer of tinplate was studied by means of scanning electron microscopy. By using the layer on layer debonding technology of glow discharge spectrum, the contents of C and O at the bound...The surface morphology of alloy layer of tinplate was studied by means of scanning electron microscopy. By using the layer on layer debonding technology of glow discharge spectrum, the contents of C and O at the boundary of alloy layer and black plate were analyzed. And the corrosion characteristic of cavity of tinplate alloy layer was studied on-line and in-situ by means of electrochemical atomic force microscope. The corrosion depth of cavity of alloy layer in-situ after different corrosion time was measured. The results show that the cavity of alloy layer is a critical factor causing rapid decline of corrosion resistance of tinplate, and the formation of cavity of alloy layer is due to incorrect pretreatment of black plate before electrotinning. The cavity of alloy layer is the internal factor causing pitting corrosion of tinplate when the tinplate is applied to food packaging material. And the dynamic equation of pitting corrosion generated in the cavity of alloy layer conforms to logarithm law.展开更多
A novel 0.1% Pd-0.05% （mass fraction） Pt/stainless steel wire mesh catalyst was prepared for volatile organic compounds （VOCs） elimination. The catalyst was synthesized by stainless steel wire mesh as support and ...A novel 0.1% Pd-0.05% （mass fraction） Pt/stainless steel wire mesh catalyst was prepared for volatile organic compounds （VOCs） elimination. The catalyst was synthesized by stainless steel wire mesh as support and then treated by anodic oxidation technology to develop a porous membrane on the support. During the anodic oxidation process, various electrolytes were used to investigate the formation of porous membrane. And the catalytic performance of the catalysts was tested by using toluene and acetone combustion as model reaction. The temperatures of complete toluene and acetone conversion were decreased to 180℃ and 240 ℃, respectively. The morphologies of the stainless steel wire mesh supports and catalysts were characterized by means of scanning electron microscopy （SEM） and temperature-programmed reduction （TPR）.展开更多
The single hot thermocouple technique （SHTT） and high temperature equilibrium technique were combined to investigate the phase diagram of the CaO-SiO2-5%MgO-20%AlzO3-TiO2 system. The 1300 ℃ to 1500 ℃ liquidus line...The single hot thermocouple technique （SHTT） and high temperature equilibrium technique were combined to investigate the phase diagram of the CaO-SiO2-5%MgO-20%AlzO3-TiO2 system. The 1300 ℃ to 1500 ℃ liquidus lines are calculated according to the thermodynamic equations based on the pseudo-melting temperatures measured by the single hot thermocouple technique. The phase equilibria relationships are experimentally determined at 1400 ℃ using the high temperature equilibria technique followed by X-ray fluorescence （XRF）, X-ray diffraction（XRD）, scanning electron microscopy （SEM） and energy dispersive X-ray spectroscopy （EDX） analysis. The liquid phase（L）, melilite solid solution phase （（C2MSz,C2AS）ss）, diopside phase（CMS2） and perovskite phase （CaO·TiO2） are found. Coupled with the liquidus lines and equilibria results, the phase diagram is constructed for the specified region of the CaO-SiO2-5%MgO-20%Al2O3-TiO2 system.展开更多
文摘O723 95021266碲镉汞晶体结构性质的电子显微术研究=Studyon the micro structure of Hg<sub>1-x</sub>Cd<sub>x</sub>Te crystalsby scanning electron microscopy[刊,中]/唐家钿,宋炳文,董先庆,欧明娣（昆明物理所.云南,昆明（650223））//红外技术.—1994,16（6）.—22—26采用扫描电子显微术对布里奇曼法。
基金Key Project(50436010, U0834002) supported by the National Natural Science Foundation of ChinaProjects(50675070, 50705031) supported by the National Natural Science Foundation of China+1 种基金Project(8151064101000058) supported by the Natural Science Foundation of Guangdong Province,ChinaProject(E200909) supported by the Natural Science Foundation of Heilongjiang Province, China
文摘In order to study reasonable sintering technological parameters and appropriate copper powder size range of micro heat pipe (MHP) with the sintered wick, the forming principle of copper powders in wicks and MHP's heat transfer capabilities were first analyzed, then copper powders with different cell sizes and dispersions were sintered in RXL-12-11 resistance furnace under the protection of the hydrogen at different sintering temperatures for different durations of sintering time, and finally the sintered wicks' scanning electron microscope (SEM) images and their heat transfer capabilities were analyzed. The results indicate that the wick sintered with copper powders of larger cell size or smaller size range has better sintering properties and larger heat transfer capabilities; and that the increase of either sintering temperatures or sintering time also helps to improve the wick's sintering properties and heat transfer capabilities, and the former affects more obviously than the latter. Considering both its manufacturing cost and performance requirements, it is recommended that copper powders with the size range of 140-170 μm are sintered at 900-950℃ for 30-60 min in practical manufacturing. In addition, two approaches to improve wick's porosity are also proposed through theoretical analysis, which suggests that the larger the wick's porosity, the better the heat transfer capabilities of the MHP.
文摘The surface morphology of alloy layer of tinplate was studied by means of scanning electron microscopy. By using the layer on layer debonding technology of glow discharge spectrum, the contents of C and O at the boundary of alloy layer and black plate were analyzed. And the corrosion characteristic of cavity of tinplate alloy layer was studied on-line and in-situ by means of electrochemical atomic force microscope. The corrosion depth of cavity of alloy layer in-situ after different corrosion time was measured. The results show that the cavity of alloy layer is a critical factor causing rapid decline of corrosion resistance of tinplate, and the formation of cavity of alloy layer is due to incorrect pretreatment of black plate before electrotinning. The cavity of alloy layer is the internal factor causing pitting corrosion of tinplate when the tinplate is applied to food packaging material. And the dynamic equation of pitting corrosion generated in the cavity of alloy layer conforms to logarithm law.
基金Project(2009C21001)supported by the Science and Technology Program of Zhejiang Province,China
文摘A novel 0.1% Pd-0.05% （mass fraction） Pt/stainless steel wire mesh catalyst was prepared for volatile organic compounds （VOCs） elimination. The catalyst was synthesized by stainless steel wire mesh as support and then treated by anodic oxidation technology to develop a porous membrane on the support. During the anodic oxidation process, various electrolytes were used to investigate the formation of porous membrane. And the catalytic performance of the catalysts was tested by using toluene and acetone combustion as model reaction. The temperatures of complete toluene and acetone conversion were decreased to 180℃ and 240 ℃, respectively. The morphologies of the stainless steel wire mesh supports and catalysts were characterized by means of scanning electron microscopy （SEM） and temperature-programmed reduction （TPR）.
基金Projects(51104039,51374059,51304042)supported by the National Natural Science Foundation of ChinaProject(L2013114)supported by Scientific Research Fund of Liaoning Provincial Education Department,China+1 种基金Project(2012221013)supported by Programs of Liaoning Province for Science and Technology Development,ChinaProject(N130602002)supported by the Fundamental Research Funds for the Central Universities China
文摘The single hot thermocouple technique （SHTT） and high temperature equilibrium technique were combined to investigate the phase diagram of the CaO-SiO2-5%MgO-20%AlzO3-TiO2 system. The 1300 ℃ to 1500 ℃ liquidus lines are calculated according to the thermodynamic equations based on the pseudo-melting temperatures measured by the single hot thermocouple technique. The phase equilibria relationships are experimentally determined at 1400 ℃ using the high temperature equilibria technique followed by X-ray fluorescence （XRF）, X-ray diffraction（XRD）, scanning electron microscopy （SEM） and energy dispersive X-ray spectroscopy （EDX） analysis. The liquid phase（L）, melilite solid solution phase （（C2MSz,C2AS）ss）, diopside phase（CMS2） and perovskite phase （CaO·TiO2） are found. Coupled with the liquidus lines and equilibria results, the phase diagram is constructed for the specified region of the CaO-SiO2-5%MgO-20%Al2O3-TiO2 system.
