期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
MMC的稳态相量模型及功率运行区间计算方法 被引量:4
1
作者 王洁聪 郭琦 +4 位作者 刘崇茹 Udaya Annakkage 黎晓 苏晨博 罗超 《电力自动化设备》 EI CSCD 北大核心 2021年第6期91-99,共9页
模块化多电平换流器(MMC)的控制器输出量与MMC内部电气量之间存在复杂的耦合关系,难以确定影响其输出功率范围的关键因素及计算功率运行区间的边界。为此,首先以dq坐标相量的形式,推导出一种新的MMC的交流侧稳态等效模型,该模型为1个等... 模块化多电平换流器(MMC)的控制器输出量与MMC内部电气量之间存在复杂的耦合关系,难以确定影响其输出功率范围的关键因素及计算功率运行区间的边界。为此,首先以dq坐标相量的形式,推导出一种新的MMC的交流侧稳态等效模型,该模型为1个等效电容与等效电压源串联。模型参数可完全由控制器输出量和直流电压确定,从而将控制输出量与运行电气量解耦;等效电容直观地反映了MMC子模块电容充放电过程造成的换流器内部耦合特性对交流侧输出特性的影响。利用所提模型可以方便地计算得到MMC输出功率的P-Q曲线。然后,通过计算P-Q曲线族的包络线,提出一种确定MMC稳态运行区域边界的方法,并研究了环流抑制控制和交流系统短路比对运行区域的影响。最后,在PSCAD/EMTDC平台上搭建单端MMC仿真模型,验证了所提模型及稳态运行区间计算方法的正确性。 展开更多
关键词 模块化多电平换流器 态相量模型 功率运行区间 耦合特性 包络线
在线阅读 下载PDF
基于自适应移频分析法的Voltage-Behind-Reactance异步电机多时间尺度暂态建模与仿真 被引量:11
2
作者 夏越 陈颖 +1 位作者 宋炎侃 秦艳辉 《电网技术》 EI CSCD 北大核心 2018年第12期3872-3879,共8页
为满足对电力系统多时间尺度暂态过程准确、快速仿真的需要,提出了一种基于自适应移频分析法的voltage-behind-reactance(VBR)异步电机多时间尺度模型。首先,基于希尔伯特变换,将传统电气信号转换为相应的解析信号;进一步,引入灵活的移... 为满足对电力系统多时间尺度暂态过程准确、快速仿真的需要,提出了一种基于自适应移频分析法的voltage-behind-reactance(VBR)异步电机多时间尺度模型。首先,基于希尔伯特变换,将传统电气信号转换为相应的解析信号;进一步,引入灵活的移频变换,利用解析信号构建异步电机暂态仿真模型。这样,移动频率成为可调节的模型参数。所提出的电机模型通过设置不同的移动频率,能够同时实现准确的高频暂态过程仿真和高效的低频暂态过程仿真。当移动频率等于零时,该模型与传统电磁暂态电机模型等价,可刻画高频暂态过程。当移动频率等于系统基波频率时,该模型适用于大步长仿真,获得低频暂态包络曲线。仿真结果表明,所提出的模型可实现准确和高效的异步电机多时间尺度暂态仿真。 展开更多
关键词 异步电机 高频暂 低频暂 多时间尺度 态相量 voltage-behind-reactance(VBR)
在线阅读 下载PDF
Influence of substituting Ni with Co on hydriding and dehydriding kinetics of melt spun nanocrystalline and amorphous Mg_2Ni-type alloys 被引量:2
3
作者 张羊换 赵栋梁 +3 位作者 李保卫 马志鸿 郭世海 王新林 《Journal of Central South University》 SCIE EI CAS 2011年第2期303-309,共7页
In order to improve the hydriding and dehydriding kinetics of the Mg2Ni-type alloys,Ni in the alloy is substituted by element Co. The nanocrystalline and amorphous Mg2Ni-type Mg2Ni1-xCox (x=0,0.1,0.2,0.3,0.4) alloys w... In order to improve the hydriding and dehydriding kinetics of the Mg2Ni-type alloys,Ni in the alloy is substituted by element Co. The nanocrystalline and amorphous Mg2Ni-type Mg2Ni1-xCox (x=0,0.1,0.2,0.3,0.4) alloys were synthesized by melt-spinning technique. The structures of the as-cast and spun alloys were studied with an X-ray diffractometer (XRD) and a high resolution transmission electronic microscope (HRTEM). An investigation on the thermal stability of the as-spun alloys was carried out with a differential scanning calorimeter (DSC). The hydrogen absorption and desorption kinetics of the alloys were measured with an automatically controlled Sieverts apparatus. The results demonstrate that the substitution of Co for Ni does not alter the major phase of Mg2Ni but results in the formation of secondary phase MgCo2. No amorphous phase is detected in the as-spun Co-free alloy,but a certain amount of amorphous phase is clearly found in the as-spun Co-containing alloys. The substitution of Co for Ni exerts a slight influence on the hydriding kinetics of the as-spun alloy. However,it dramatically enhances the dehydriding kinetics of the as-cast and spun alloys. As Co content (x) increases from 0 to 0.4,the hydrogen desorption capacity increases from 0.19% to 1.39% (mass fraction) in 20 min for the as-cast alloy,and from 0.89% to 2.18% (mass fraction) for the as-spun alloy (30 m/s). 展开更多
关键词 Mg2Ni-type alloy MELT-SPINNING substituting NI Co structure HYDRIDING dehydriding KINETICS
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部