期刊文献+
共找到16篇文章
< 1 >
每页显示 20 50 100
5A06铝合金超快变换复合脉冲方波VPTIG焊接 被引量:5
1
作者 从保强 齐铂金 +1 位作者 周兴国 罗军 《宇航材料工艺》 CAS CSCD 北大核心 2009年第2期71-74,78,共5页
研究了一种适用于焊接铝合金的超快速变换复合脉冲方波变极性电弧焊接工艺,以5A06铝合金为焊接试验对象,对不同工艺参数下复合脉冲方波变极性TIG焊接接头的显微组织和拉伸力学性能变化进行了试验研究。结果表明,在5A06铝合金焊接过程中... 研究了一种适用于焊接铝合金的超快速变换复合脉冲方波变极性电弧焊接工艺,以5A06铝合金为焊接试验对象,对不同工艺参数下复合脉冲方波变极性TIG焊接接头的显微组织和拉伸力学性能变化进行了试验研究。结果表明,在5A06铝合金焊接过程中引入高频直流脉冲方波电流,恰当选择其频率和占空比大小,可增加焊缝组织中金属间化合物的析出数量,显著改善和提高5A06铝合金的焊接质量。当脉冲电流频率为40 kHz,占空比为50%时,焊接接头拉伸强度和断后伸长率分别达到母材金属的95.8%和84.8%。 展开更多
关键词 快变换 复合脉冲方波 变极性 铝合金
在线阅读 下载PDF
超快变换复合脉冲方波变极性TIG电弧行为 被引量:5
2
作者 从保强 齐铂金 周兴国 《北京航空航天大学学报》 EI CAS CSCD 北大核心 2009年第8期1013-1017,共5页
基于一种新型超快变换复合脉冲变极性电路变换拓扑,在正极性电流持续期间,叠加超音频直流脉冲方波电流,获得了过零无死区时间且具有快速电流上升沿和下降沿变化速率的复合超音频脉冲变极性方波电流,将其应用于铝合金的变极性TIG焊接过程... 基于一种新型超快变换复合脉冲变极性电路变换拓扑,在正极性电流持续期间,叠加超音频直流脉冲方波电流,获得了过零无死区时间且具有快速电流上升沿和下降沿变化速率的复合超音频脉冲变极性方波电流,将其应用于铝合金的变极性TIG焊接过程,试验研究复合超音频脉冲方波变极性TIG电弧电学特性及其对铝合金焊缝成形等行为的变化规律.研究结果表明:超音频脉冲方波电流对变极性TIG电弧具有显著的收缩效应,电弧径向尺寸明显减小,在一定范围内提高脉冲电流频率,减小脉冲占空比,增加脉冲电流幅值,可提高铝合金焊缝熔透率,有利于改善和提高铝合金的焊接质量. 展开更多
关键词 快变换 超音频脉冲电流 变极性 电弧行为 收缩效应
在线阅读 下载PDF
快变换超音频直流脉冲GTAW电弧行为 被引量:3
3
作者 杨明轩 齐铂金 +1 位作者 从保强 李伟 《北京航空航天大学学报》 EI CAS CSCD 北大核心 2012年第4期468-472,共5页
基于超音频直流脉冲钨极氩弧焊(GTAW,Gas Tungsten Arc Welding)电源输出脉冲电流沿变化率di/dt≥50 A/μs的超音频直流脉冲方波电流,将其用于0Cr18Ni9Ti奥氏体不锈钢GTAW焊接过程,研究分析了焊接电弧特性、电弧力及焊缝熔透特性.结果表... 基于超音频直流脉冲钨极氩弧焊(GTAW,Gas Tungsten Arc Welding)电源输出脉冲电流沿变化率di/dt≥50 A/μs的超音频直流脉冲方波电流,将其用于0Cr18Ni9Ti奥氏体不锈钢GTAW焊接过程,研究分析了焊接电弧特性、电弧力及焊缝熔透特性.结果表明:超音频直流脉冲方波电流参数对电弧电学特性、形态及电弧力产生显著影响,与常规直流GTAW相比,快变换超音频直流脉冲GTAW电弧表现出明显的收缩效应,焊缝熔深在一定范围增大,熔宽减小,平均电弧力大幅增长,焊接效率提高. 展开更多
关键词 快变换超音频脉冲 钨极氩弧焊 电弧行为 电弧力
在线阅读 下载PDF
5A06铝合金超快变换极性VPTIG焊接工艺 被引量:3
4
作者 从保强 齐铂金 +1 位作者 周兴国 罗军 《航空制造技术》 2009年第5期74-77,共4页
研发了一种适用于铝合金材料的新型超快速变换变极性焊接工艺,以5A06为焊接对象,通过X射线探伤、拉伸试验、金相分析以及扫描电镜等手段对超快变换VPTIG焊接工艺进行了试验研究。试验结果表明,超快变换变极性TIG焊接工艺能够显著改善和... 研发了一种适用于铝合金材料的新型超快速变换变极性焊接工艺,以5A06为焊接对象,通过X射线探伤、拉伸试验、金相分析以及扫描电镜等手段对超快变换VPTIG焊接工艺进行了试验研究。试验结果表明,超快变换变极性TIG焊接工艺能够显著改善和提高5A06铝合金的焊接质量。 展开更多
关键词 快变换 变极性 5A06铝合金 焊接工艺
在线阅读 下载PDF
快变换交流方波埋弧焊电源研制 被引量:3
5
作者 齐铂金 王义朋 王曲 《航空制造技术》 2016年第17期67-70,76,共5页
设计了一种双逆变电路结构的快变换交流方波埋弧焊电源,该电源由全桥型一次逆变电路和半桥型二次逆变电路组成。二次逆变电路由续流耦合电感、小功率电压尖峰吸收保护逆变回馈电路、IGBT半桥电路构成。一次逆变电路采用了电压、电流双... 设计了一种双逆变电路结构的快变换交流方波埋弧焊电源,该电源由全桥型一次逆变电路和半桥型二次逆变电路组成。二次逆变电路由续流耦合电感、小功率电压尖峰吸收保护逆变回馈电路、IGBT半桥电路构成。一次逆变电路采用了电压、电流双闭环控制,二次逆变电路采用"临界共同导通"的控制策略,并对其电路换向过程进行了分析。试验结果表明,这种交流方波埋弧焊电源在电流换向过程中换向速度快且无过零死区时间,保证了电弧稳定性,具有良好的工程应用前景。 展开更多
关键词 埋弧焊电源 快变换 交流方波 逆变电路 控制策略
在线阅读 下载PDF
基于快时间keystone变换和FrFT的无人机检测算法
6
作者 王春蕾 周传睿 《现代雷达》 CSCD 北大核心 2024年第7期45-51,共7页
连续波雷达通常采用长时间相参累积技术来增强对无人机的探测能力。然而,无人机具有高机动性,在做长时间相参积累时易发生距离徙动和多普勒频率徙动,导致雷达检测性能衰退。针对此问题,文中提出了一种基于快时间keystone变换和分数阶傅... 连续波雷达通常采用长时间相参累积技术来增强对无人机的探测能力。然而,无人机具有高机动性,在做长时间相参积累时易发生距离徙动和多普勒频率徙动,导致雷达检测性能衰退。针对此问题,文中提出了一种基于快时间keystone变换和分数阶傅里叶变换(FrFT)的连续波雷达无人机检测算法,通过快时间keystone变换校正距离徙动,采用FrFT补偿多普勒频率徙动,进而完成相参积累和检测。不同于传统keystone变换作用于快时间域,快时间keystone变换作用于距离频率域,这是连续波雷达信号模型的特性导致的。仿真分析显示,文中算法可良好地平衡检测性能和计算量之间的矛盾;并采用雷达实测数据验证了所提算法的有效性。 展开更多
关键词 连续波雷达 无人机探测 距离徙动 多普勒频率徙动 时间keystone变换 分数阶傅里叶变换
在线阅读 下载PDF
高强铝合金复合脉冲VPTIG焊缝组织和性能 被引量:7
7
作者 从保强 齐铂金 +1 位作者 周兴国 罗军 《北京航空航天大学学报》 EI CAS CSCD 北大核心 2010年第1期1-5,共5页
采用超快速变换复合超音频脉冲方波变极性TIG电弧焊接工艺进行2219-T87高强铝合金焊接,研究分析了焊缝显微组织和接头拉伸性能变化.结果表明,2219-T87铝合金复合超音频脉冲电流变极性焊接接头的组织和性能均发生显著变化,焊缝区显微组... 采用超快速变换复合超音频脉冲方波变极性TIG电弧焊接工艺进行2219-T87高强铝合金焊接,研究分析了焊缝显微组织和接头拉伸性能变化.结果表明,2219-T87铝合金复合超音频脉冲电流变极性焊接接头的组织和性能均发生显著变化,焊缝区显微组织明显细化,由粗大柱状晶向细小等轴晶转变,接头抗拉强度和断后伸长率显著提高.接头断口由脆性断裂主要特征转变为"韧性+脆性"的混合型断裂模式.在一定范围内,脉冲电流频率越高,脉冲占空比越小,作用效果越明显.复合超音频脉冲电流频率为40 kHz,脉冲电流占空比为20%时,接头抗拉强度和断后伸长率分别达到母材金属的70%和58%. 展开更多
关键词 高强铝合金 快变换 超音频脉冲 变极性 等轴晶
在线阅读 下载PDF
铝合金材料的高质量电弧焊接新工艺 被引量:4
8
作者 从保强 齐铂金 +1 位作者 杨明轩 王乐笑 《航天制造技术》 2011年第1期13-16,共4页
针对铝合金材料电弧焊接加工存在的问题,研究开发出了一种新型的超快速变换复合超音频脉冲方波变极性氩弧焊接方法,并将其用于5A06、2A14和2219等多种铝合金材料的焊接试验加工过程。研究结果表明,采用复合超音频脉冲方波变极性钨极氩... 针对铝合金材料电弧焊接加工存在的问题,研究开发出了一种新型的超快速变换复合超音频脉冲方波变极性氩弧焊接方法,并将其用于5A06、2A14和2219等多种铝合金材料的焊接试验加工过程。研究结果表明,采用复合超音频脉冲方波变极性钨极氩弧焊接工艺进行铝合金材料焊接加工,可有效减少甚至消除焊缝气孔等缺陷,显著改善和提高焊接接头力学性能,从而获得满意的电弧焊接质量。 展开更多
关键词 铝合金 快变换 超音频脉冲电流 变极性钨极氩弧焊 焊接质量
在线阅读 下载PDF
距离-速度同步干扰环境下的目标检测 被引量:2
9
作者 张勇强 熊英 唐斌 《电讯技术》 北大核心 2013年第9期1191-1196,共6页
针对距离-速度同步干扰,首先基于多普勒滤波器组和恒虚警率(CFAR)检测技术得到目标检测决策,并结合目标检测决策建立雷达回波的速度-时间数据矩阵。随后分析了目标和干扰的特征差异,基于超快霍夫变换(VFHT)提取雷达回波的目标特征霍夫... 针对距离-速度同步干扰,首先基于多普勒滤波器组和恒虚警率(CFAR)检测技术得到目标检测决策,并结合目标检测决策建立雷达回波的速度-时间数据矩阵。随后分析了目标和干扰的特征差异,基于超快霍夫变换(VFHT)提取雷达回波的目标特征霍夫空间。最后根据该霍夫空间采用CFAR检测技术对目标检测,从而形成基于距离-速度同步干扰抑制的目标检测方法。与常规快速霍夫变换(FHT)相比,提出的VFHT具有更高的计算效率。同时,该方法由于在雷达数据处理层面进行目标检测,不需要改变雷达系统的信号处理结构,大大降低了雷达装备成本。理论仿真表明在同样的目标检测性能前提下,基于VHFT的目标检测算法所需的信噪比要求放宽了10 dB以上,为弱目标回波信号环境中的应用奠定了基础。 展开更多
关键词 雷达对抗 目标检测 霍夫变换 距离-速度同步干扰 恒虚警率
在线阅读 下载PDF
Fast Digital Correlation Calculation Method in Extended Beacon Wavefront Detection 被引量:1
10
作者 陈珂 赵达尊 《Journal of Beijing Institute of Technology》 EI CAS 2001年第4期342-348,共7页
On the basis of Hartmann Shack sensor imaging analysis, a new method is presented with which the wavefront slope can be obtained when the object is incoherent and extended. This method, which is demonstrated by both ... On the basis of Hartmann Shack sensor imaging analysis, a new method is presented with which the wavefront slope can be obtained when the object is incoherent and extended. This method, which is demonstrated by both theoretical interpreting and computer simulation, explains how to measure the wavefront slope difference between two sub apertures through the determination of image displacements on detector plane. It includes a fast and accurate digital algorithm for detecting wavefront disturbance, which is much suitable for realization in such electrical hardwares as digital signal processors. 展开更多
关键词 adaptive optics extended beacon wavefront detection fast Fourier transform sequential similarity detection algorithm
在线阅读 下载PDF
FAST IMPLEMENTATION OF CONVOLUTION BACKPROJECTION ALGORITHM IN SPOTLIGHT SAR 被引量:1
11
作者 聂鑫 朱岱寅 朱兆达 《Transactions of Nanjing University of Aeronautics and Astronautics》 EI 2010年第4期333-337,共5页
A fast implementation of the convolution backprojection(CBP)algorithm in spotlight synthetic aperture radar(SAR)is presented based on the fast Fourier transform(FFT).Traditionally,the computation of the 'backpr... A fast implementation of the convolution backprojection(CBP)algorithm in spotlight synthetic aperture radar(SAR)is presented based on the fast Fourier transform(FFT).Traditionally,the computation of the 'backprojection' process is expensive,since resampling in the process is implemented by using the interpolation operation.By analyzing the relative location relationship among different pixels,the algorithm realizes the 'backprojection' using a series of FFTs instead of the interpolation operation.The point target simulation validates that the new algorithm accelerates the CBP algorithm,and the computational rate increases about 85%. 展开更多
关键词 synthetic aperture radar(SAR) fast Fourier transforms(FFTs) fast implementation convolution backprojection(CBP)
在线阅读 下载PDF
Walsh Hadamard Transform Based Transceiver Design for SC-FDMA with Discrete Wavelet Transform 被引量:2
12
作者 Arsla Khan Amna Arif +1 位作者 Tabassum Nawaz Sobia Baig 《China Communications》 SCIE CSCD 2017年第5期193-206,共14页
This article proposes a new transceiver design for Single carrier frequency division multiple access(SCFDMA)system based on discrete wavelet transform(DWT). SCFDMA offers almost same structure as Orthogonal frequency ... This article proposes a new transceiver design for Single carrier frequency division multiple access(SCFDMA)system based on discrete wavelet transform(DWT). SCFDMA offers almost same structure as Orthogonal frequency division multiple access(OFDMA)with extra advantage of low Peak to Average Power Ratio(PAPR). Moreover,this article also suggests the application of Walsh Hadamard transform(WHT)for linear precoding(LP)to improve the PAPR performance of the system. Supremacy of the proposed transceiver over conventional Fast Fourier transform(FFT)based SCFDMA is shown through simulated results in terms of PAPR,spectral efficiency(SE)and bit error rate(BER). 展开更多
关键词 multicarrier modulation orthogonal frequency division multiple access single carrier frequency division multiple access: fast Fourier transform discrete wavelet transform Walsh Hadamard transform
在线阅读 下载PDF
Digital Channelization Technology for HF Communication Base on Fast Filter Bank 被引量:3
13
作者 Yixin Fan Fanglin Gu +1 位作者 Xiaobo Tan Ling Wang 《China Communications》 SCIE CSCD 2018年第9期35-45,共11页
Channelization typically realized by digital filter banks is an important topic in high frequency(HF) communication and software defined radios(SDR) areas. Channelization has a rigorous requirement for the characteris... Channelization typically realized by digital filter banks is an important topic in high frequency(HF) communication and software defined radios(SDR) areas. Channelization has a rigorous requirement for the characteristic of frequency response, e.g., steep transitional band and sharp decay. To address this issue, we investigated the feasibility and implementation of applying fast filter bank(FFB) in channelization in this paper. We analyzed the butterfly structure of FFB similar with fast Fourier transform(FFT), in which prototype sub-filters are cascaded to achieve a low complexity. Hence, it is suitable for designing filter bank with steep transitional band and sharp decay in stop-band. Moreover, we designed a pipelined structure of FFB to achieve a balance between area and performance. Design example shows that FFB has lower computational complexity compared with the other filter banks. 展开更多
关键词 fast filter bank (FFB) high frequency (HF) CHANNELIZATION software defined radio (SDR)
在线阅读 下载PDF
Application of fractal theory in detecting low current faults of power distribution system in coal mines 被引量:5
14
作者 LIU Jian-hua LIANG Rui WANG Chong-lin FAN Di-peng 《Mining Science and Technology》 EI CAS 2009年第3期321-325,共5页
Single-phase low current grounding faults areoften seen in power distribution system of coal mines.These faults are difficult to reliably identify.We propose a new method of single-phase ground fault protection based ... Single-phase low current grounding faults areoften seen in power distribution system of coal mines.These faults are difficult to reliably identify.We propose a new method of single-phase ground fault protection based upon a discernible matrix of the fractal dimension associated with line currents.The method builds on existing selective protection methods.Faulted feeders are distinguished using differences in the zero-sequence transient current fractal dimension.The current signals were first processed through a fast Fourier transform and then the characteristics of a faulted line were identified using a discernible matrix.The method of calculation is illustrated.The results show that the method involves simple calculations, is easy to do and is highly accurate.It is, therefore, suitable for distribution networks having different neutral grounding modes. 展开更多
关键词 low current faults zero sequence transient current fractal dimension discernible matrix selective protection
在线阅读 下载PDF
Direction of Arrivals Estimation for Correlated Broadband Radio Signals by MVDR Algorithm Using Wavelet 被引量:3
15
作者 Ying Liu Chi Xie Yourun Zhang 《China Communications》 SCIE CSCD 2017年第3期190-197,共8页
A theoretical relationship between the wavelet transform and the fast fourier transformation(FFT) methods in broadband wireless signal is proposed for solving the direction of arrivals(DOAs) estimation problem. This l... A theoretical relationship between the wavelet transform and the fast fourier transformation(FFT) methods in broadband wireless signal is proposed for solving the direction of arrivals(DOAs) estimation problem. This leads naturally to the derivation of minimum variance distortionless response(MVDR) algorithm, which combines the benefits of subspace methods with those of wavelet, and spatially smoothed versions are utilized which exhibits good performance against correlated signals. We test the method's performance by simulating and comparing the performance of proposed algorithm, FFT MVDR and MVDR with correlated signals, and an improved performance is obtained. 展开更多
关键词 array antenna broadband radio signal direction of arrival MVDR algorithm wavelet
在线阅读 下载PDF
Comparison of fast discrete wavelet transform algorithms
16
作者 孟书苹 《Journal of Chongqing University》 CAS 2005年第2期84-89,共6页
This paper presents an analysis on and experimental comparison of several typical fast algorithms for discrete wavelet transform (DWT) and their implementation in image compression, particularly the Mallat algorithm, ... This paper presents an analysis on and experimental comparison of several typical fast algorithms for discrete wavelet transform (DWT) and their implementation in image compression, particularly the Mallat algorithm, FFT-based algorithm, Short- length based algorithm and Lifting algorithm. The principles, structures and computational complexity of these algorithms are explored in details respectively. The results of the experiments for comparison are consistent to those simulated by MATLAB. It is found that there are limitations in the implementation of DWT. Some algorithms are workable only for special wavelet transform, lacking in generality. Above all, the speed of wavelet transform, as the governing element to the speed of image processing, is in fact the retarding factor for real-time image processing. 展开更多
关键词 discrete wavelet transforms (DWT) fast algorithms computational complexity
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部