New solid backfill mining technology provides unique technical advantages for ‘‘three-under'' coal mining which refers to coal resources trapped under buildings, railways, and water bodies. This technology h...New solid backfill mining technology provides unique technical advantages for ‘‘three-under'' coal mining which refers to coal resources trapped under buildings, railways, and water bodies. This technology has a much higher recovery rate and can effectively control the surface subsidence. However, successful application of this technology depends heavily on geological conditions. To avoid the disadvantages associated with downward mining and overhead backfilling with this new technology, a new advanced solid backfill mining design with two pre-driving entries is proposed here to ensure the backfill effect. Taking Huayuan coal mine as an example, this paper tests the double gob-side entries retaining with no pillar left scheme and optimizes an integrated technology setup for backfill mining and gob-side entry retaining. Field applications show that the recovery rate increased from 40% for strip mining to 85% for backfill mining. Moreover, the new backfill technology allowed for better control over the surrounding rock deformation caused by the gob-side entry retaining effect and better control of ground subsidence as compared to strip mining.展开更多
Owing to the variability of mine surfaces, it is difficult to obtain the deformation monitoring data of the observation stations by traditional leveling technique. GPS RTK （Real-Time Kinematic） technique was employe...Owing to the variability of mine surfaces, it is difficult to obtain the deformation monitoring data of the observation stations by traditional leveling technique. GPS RTK （Real-Time Kinematic） technique was employed to the subsidence observation in this paper, and its main sources of errors including rover pole deflection of the vertical, un-modeled systematic errors （gross error, multipath delay etc.） and the height transformation error, were analyzed systematically. Based on the fundamental theories of spherical fit- ting and Empirical Mode Decomposition （EMD）, the error reduction models were studied exhaustively. And two experiments were done in different environment to test the proposed models. The results show that the proposed methods can achieve a fourth-grade leveling accuracy, with （Root-Mean-Square） RMS in three orthogonal directions （N, E and H） of 4.1, 3.3 and 3.1 ram, respectively, by 3-5 rain continuous shaking of the observation GPS antenna, fully satisfying for mine surface subsidence deformation monitoring.展开更多
We proved theoretically that geodetic height, measured with Global Positioning System （GPS）, can he applied directly to monitor coal mine subsidence. Based on a Support Vector Machine （SVM） model, we built a regio...We proved theoretically that geodetic height, measured with Global Positioning System （GPS）, can he applied directly to monitor coal mine subsidence. Based on a Support Vector Machine （SVM） model, we built a regional geoid model with a Gaussian Radial Basis Function （RBF） and the technical scheme for GPS coal mine subsidence monitoring is presented to provide subsidence information for updating the regional Digital Elevation Model （DEM）. The theory proposed was applied to monitor mining subsi- dence in an Inner Mongolia coal mine in China. The scheme established an accurate GPS reference net- work and a comprehensive leveling conjunction provided the normal height of all GPS control points. According to the case study, the SVM model to establish geoid-model is better than a polynomial fit or a Genetic Algorithm based Back Propagation （GA-BP）neural network. GPS-RTK measurements of coal mine subsidence information can be quickly acquired for updating the DEM.展开更多
This paper mainly deals with the present situation, characteristics, and countermeasures of cooling in deep mines.Given existing problems in coal mines, a HEMS cooling technology is proposed and has been successfully ...This paper mainly deals with the present situation, characteristics, and countermeasures of cooling in deep mines.Given existing problems in coal mines, a HEMS cooling technology is proposed and has been successfully applied in some mines.Because of long-term exploitation, shallow buried coal seams have become exhausted and most coal mines have had to exploit deep buried coal seams.With the increase in mining depth, the temperature of the surrounding rock also increases, resulting in ever increasing risks of heat hazard during mining operations.At present, coal mines in China can be divided into three groups, i.e., normal temperature mines, middle-to-high temperature mines and high temperature mines, based on our investigation into high temperature coal mines in four provinces and on in-situ studies of several typical mines.The principle of HEMS is to extract cold energy from mine water inrush.Based on the characteristics of strata temperature field and on differences in the amounts of mine water inrush in the Xuzhou mining area, we proposed three models for controlling heat hazard in deep mines:1) the Jiahe model with a moderate source of cold energy;2) the Sanhejian model with a shortage of source of cold energy and a geothermal anomaly and 3) the Zhangshuanglou model with plenty of source of cold energy.The cooling process of HEMS applied in deep coal mine are as follows:1) extract cold energy from mine water inrush to cool working faces;2) use the heat extracted by HEMS to supply heat to buildings and bath water to replace the use of a boiler, a useful energy saving and environmental protection measure.HEMS has been applied in the Jiahe and Sanhejian coal mines in Xuzhou, which enabled the temperature and humidity at the working faces to be well controlled.展开更多
Based on break characteristics of roofs in fully mechanized top-coal mining of thick shallow coal seams, a fracture mechanics model was built, and the criterion of crack propagation in the main roof was derived using ...Based on break characteristics of roofs in fully mechanized top-coal mining of thick shallow coal seams, a fracture mechanics model was built, and the criterion of crack propagation in the main roof was derived using the fracture mechanics theory. The relationships between the fracture length of the roof and the working resistance of the supports were discovered, and the correlations between the load on the overlying strata and the ratio of the crack's length to the thickness of the roof were obtained. Using a working face of Jindi Coal Mine, Xing county Shanxi province as an example, the relationships between the fracture length of the roof and the working resistance of the supports were analysed in detail. The results give a design basis in hydraulic top coal caving supports, which could provide useful references in the practical application. On-site experiment proves that the periodic weighting step interval of the caving face is 15–16 m, which is basically consistent with the theoretical analysis results, and indicates that the mechanized caving hydraulic support is capable of meeting the support requirements in the mining of a super-thick but shallowly buried coal seam.展开更多
The author presents the results being the effect of the analysis of innovative rate of individual technologies applied in opening up,development and extraction works which was carried out within the project:"scen...The author presents the results being the effect of the analysis of innovative rate of individual technologies applied in opening up,development and extraction works which was carried out within the project:"scenarios of technological development of hard coal extractive industry".After presentation of opening up,development and extraction technologies that are applied in Polish hard coal industry and their classification with regard to innovation degree the author describes those technologies in a detailed manner.He brings attention to the most effective systems for hard coal deposits’ opening up,development and their extraction,including the extraction of the residual coal.The attention is also paid to the safety level of the applied technologies.展开更多
基金supported by the Fundamental Research Funds program for the Central Universities (No. 2014RC02)the Research Innovation Program for College Graduates of Jiangsu Province (No. CXLX13_951)Qing Lan Project
文摘New solid backfill mining technology provides unique technical advantages for ‘‘three-under'' coal mining which refers to coal resources trapped under buildings, railways, and water bodies. This technology has a much higher recovery rate and can effectively control the surface subsidence. However, successful application of this technology depends heavily on geological conditions. To avoid the disadvantages associated with downward mining and overhead backfilling with this new technology, a new advanced solid backfill mining design with two pre-driving entries is proposed here to ensure the backfill effect. Taking Huayuan coal mine as an example, this paper tests the double gob-side entries retaining with no pillar left scheme and optimizes an integrated technology setup for backfill mining and gob-side entry retaining. Field applications show that the recovery rate increased from 40% for strip mining to 85% for backfill mining. Moreover, the new backfill technology allowed for better control over the surrounding rock deformation caused by the gob-side entry retaining effect and better control of ground subsidence as compared to strip mining.
基金sponsored by the National Natural Science Foundation of China (Nos.41074010, 41104005 and 40904004)the Scientific Research Foundation of Key Laboratory for Land Environment and Disaster Monitoring of SBSM (Nos.LEDM2010B12 and LEDM2009A01) the Jiangsu Qinglan Project
文摘Owing to the variability of mine surfaces, it is difficult to obtain the deformation monitoring data of the observation stations by traditional leveling technique. GPS RTK （Real-Time Kinematic） technique was employed to the subsidence observation in this paper, and its main sources of errors including rover pole deflection of the vertical, un-modeled systematic errors （gross error, multipath delay etc.） and the height transformation error, were analyzed systematically. Based on the fundamental theories of spherical fit- ting and Empirical Mode Decomposition （EMD）, the error reduction models were studied exhaustively. And two experiments were done in different environment to test the proposed models. The results show that the proposed methods can achieve a fourth-grade leveling accuracy, with （Root-Mean-Square） RMS in three orthogonal directions （N, E and H） of 4.1, 3.3 and 3.1 ram, respectively, by 3-5 rain continuous shaking of the observation GPS antenna, fully satisfying for mine surface subsidence deformation monitoring.
基金supported by the Doctoral Program of Higher Education of China (Nos.200802901516 and 200802900501)the State Key Laboratory of Coal Resources and Mine Safety(No.08KF07)the National Natural Science Foundation of China (Nos.40774010and 40904004)
文摘We proved theoretically that geodetic height, measured with Global Positioning System （GPS）, can he applied directly to monitor coal mine subsidence. Based on a Support Vector Machine （SVM） model, we built a regional geoid model with a Gaussian Radial Basis Function （RBF） and the technical scheme for GPS coal mine subsidence monitoring is presented to provide subsidence information for updating the regional Digital Elevation Model （DEM）. The theory proposed was applied to monitor mining subsi- dence in an Inner Mongolia coal mine in China. The scheme established an accurate GPS reference net- work and a comprehensive leveling conjunction provided the normal height of all GPS control points. According to the case study, the SVM model to establish geoid-model is better than a polynomial fit or a Genetic Algorithm based Back Propagation （GA-BP）neural network. GPS-RTK measurements of coal mine subsidence information can be quickly acquired for updating the DEM.
基金Project 2006CB202200 supported by the National Basic Research Program of Chinathe National Major Project of Ministry of Education (304005)the Program for Changjiang Scholars and Innovative Research Team in University of China (NoIRT0656)
文摘This paper mainly deals with the present situation, characteristics, and countermeasures of cooling in deep mines.Given existing problems in coal mines, a HEMS cooling technology is proposed and has been successfully applied in some mines.Because of long-term exploitation, shallow buried coal seams have become exhausted and most coal mines have had to exploit deep buried coal seams.With the increase in mining depth, the temperature of the surrounding rock also increases, resulting in ever increasing risks of heat hazard during mining operations.At present, coal mines in China can be divided into three groups, i.e., normal temperature mines, middle-to-high temperature mines and high temperature mines, based on our investigation into high temperature coal mines in four provinces and on in-situ studies of several typical mines.The principle of HEMS is to extract cold energy from mine water inrush.Based on the characteristics of strata temperature field and on differences in the amounts of mine water inrush in the Xuzhou mining area, we proposed three models for controlling heat hazard in deep mines:1) the Jiahe model with a moderate source of cold energy;2) the Sanhejian model with a shortage of source of cold energy and a geothermal anomaly and 3) the Zhangshuanglou model with plenty of source of cold energy.The cooling process of HEMS applied in deep coal mine are as follows:1) extract cold energy from mine water inrush to cool working faces;2) use the heat extracted by HEMS to supply heat to buildings and bath water to replace the use of a boiler, a useful energy saving and environmental protection measure.HEMS has been applied in the Jiahe and Sanhejian coal mines in Xuzhou, which enabled the temperature and humidity at the working faces to be well controlled.
文摘Based on break characteristics of roofs in fully mechanized top-coal mining of thick shallow coal seams, a fracture mechanics model was built, and the criterion of crack propagation in the main roof was derived using the fracture mechanics theory. The relationships between the fracture length of the roof and the working resistance of the supports were discovered, and the correlations between the load on the overlying strata and the ratio of the crack's length to the thickness of the roof were obtained. Using a working face of Jindi Coal Mine, Xing county Shanxi province as an example, the relationships between the fracture length of the roof and the working resistance of the supports were analysed in detail. The results give a design basis in hydraulic top coal caving supports, which could provide useful references in the practical application. On-site experiment proves that the periodic weighting step interval of the caving face is 15–16 m, which is basically consistent with the theoretical analysis results, and indicates that the mechanized caving hydraulic support is capable of meeting the support requirements in the mining of a super-thick but shallowly buried coal seam.
文摘The author presents the results being the effect of the analysis of innovative rate of individual technologies applied in opening up,development and extraction works which was carried out within the project:"scenarios of technological development of hard coal extractive industry".After presentation of opening up,development and extraction technologies that are applied in Polish hard coal industry and their classification with regard to innovation degree the author describes those technologies in a detailed manner.He brings attention to the most effective systems for hard coal deposits’ opening up,development and their extraction,including the extraction of the residual coal.The attention is also paid to the safety level of the applied technologies.
