A geometric modeling method for generating-manufactured spiral bevel gears（SBGs） is proposed. It consists of two steps： （1） creating a reference model by simulating the process of cutting spiral bevel gear,（2） ...A geometric modeling method for generating-manufactured spiral bevel gears（SBGs） is proposed. It consists of two steps： （1） creating a reference model by simulating the process of cutting spiral bevel gear,（2） reconstructing the final solid model by collecting data points from the reference model and fitting these points into NURBS surfaces. In this method,cutting simulation avoids abstruse mathematical theories and complex methods,thus making it convenient to obtain data points on the complex tooth surface before the gear is manufactured and efficient to increase the accuracy of the solid model. Also,the representations of tooth surfaces of the final model is unified as a NURBS surface function. The NURBS surface is continuous and smooth,thus it is available for wide applications in CAD/CAE. The experiment proves that the method can be used to establish an accurate pair of SBG models,thus providing a feasible and effective way for CAD/CAE modeling.展开更多
The skewed symmetry detection plays an improtant role in three-dimensional（3-D） reconstruction. The skewed symmetry depicts a real symmetry viewed from some unknown viewing directions. And the skewed symmetry detect...The skewed symmetry detection plays an improtant role in three-dimensional（3-D） reconstruction. The skewed symmetry depicts a real symmetry viewed from some unknown viewing directions. And the skewed symmetry detection can decrease the geometric constrains and the complexity of 3-D reconstruction. The detection technique for the quadric curve ellipse proposed by Sugimoto is improved to further cover quadric curves including hyperbola and parabola. With the parametric detection, the 3-D quadric curve projection matching is automatical- ly accomplished. Finally, the skewed symmetry surface of the quadric surface solid is obtained. Several examples are used to verify the feasibility of the algorithm and satisfying results can be obtained.展开更多
The present paper discusses the modeling of tool geometry effects on the friction stir aluminum welds using response surface methodology. The friction stir welding tools were designed with different shoulder and tool ...The present paper discusses the modeling of tool geometry effects on the friction stir aluminum welds using response surface methodology. The friction stir welding tools were designed with different shoulder and tool probe geometries based on a design matrix. The matrix for the tool designing was made for three types of tools, based on three types of probes, with three levels each for defining the shoulder surface type and probe profile geometries. Then, the effects of tool shoulder and probe geometries on friction stirred aluminum welds were experimentally investigated with respect to weld strength, weld cross section area, grain size of weld and grain size of thermo-mechanically affected zone. These effects were modeled using multiple and response surface regression analysis. The response surface regression modeling were found to be appropriate for defining the friction stir weldment characteristics.展开更多
This paper proposes the concept of projection curves based on the theory of CT image reconstruction to probe the internal structure of the working panel prior to formal mining of the working panel.As well as reducing ...This paper proposes the concept of projection curves based on the theory of CT image reconstruction to probe the internal structure of the working panel prior to formal mining of the working panel.As well as reducing costs,this method provides safe and efficient excavation of the working panel.According to the results of the numerical model and the actual working panel,the new method has been proven to be accurate in detecting the location of the fault that extends into the face.Concealed faults of the internal working panel,as well as the start and end points of the fault,can be detected by this method.Engineering practice has proven that the method is highly reliable,has a highly decisive impact on faults for coal mining,and can be used to guide the safe mining of the working panel.展开更多
Acid mine drainage（AMD） is commonly treated by neutralization with alkaline substances.This treatment is supported by titration experiments that illustrate the buffering mechanisms and estimate the base neutralizati...Acid mine drainage（AMD） is commonly treated by neutralization with alkaline substances.This treatment is supported by titration experiments that illustrate the buffering mechanisms and estimate the base neutralization capacity（BNC） of the AMD.Detailed explanation of titration curves requires modeling with a hydro-chemical model.In this study the titration curves of water samples from the drainage of the As Pontes mine and the corresponding dumps have been investigated and six buffers are selerted by analyzing those curves.Titration curves have been simulated by a reactive transport model to discover the detailed buffering mechanisms.These simulations show seven regions involving different buffering mechanism.The BNC is primarily from buffers of dissolved Fe,Al and hydrogen sulfate.The BNC can be approximated by：BNC = 3（C_（Fe） ＋ C_（Al）） ＋ 0.05C_（sulfate）,where the units are mol/L.The BNC of the sample from the mine is 9.25×10^（-3） mol/L and that of the dumps sample is 1.28×10^（-2） mol/L展开更多
文摘A geometric modeling method for generating-manufactured spiral bevel gears（SBGs） is proposed. It consists of two steps： （1） creating a reference model by simulating the process of cutting spiral bevel gear,（2） reconstructing the final solid model by collecting data points from the reference model and fitting these points into NURBS surfaces. In this method,cutting simulation avoids abstruse mathematical theories and complex methods,thus making it convenient to obtain data points on the complex tooth surface before the gear is manufactured and efficient to increase the accuracy of the solid model. Also,the representations of tooth surfaces of the final model is unified as a NURBS surface function. The NURBS surface is continuous and smooth,thus it is available for wide applications in CAD/CAE. The experiment proves that the method can be used to establish an accurate pair of SBG models,thus providing a feasible and effective way for CAD/CAE modeling.
基金Supported by the National Natural Science Foundation of China(10377007)~~
文摘The skewed symmetry detection plays an improtant role in three-dimensional（3-D） reconstruction. The skewed symmetry depicts a real symmetry viewed from some unknown viewing directions. And the skewed symmetry detection can decrease the geometric constrains and the complexity of 3-D reconstruction. The detection technique for the quadric curve ellipse proposed by Sugimoto is improved to further cover quadric curves including hyperbola and parabola. With the parametric detection, the 3-D quadric curve projection matching is automatical- ly accomplished. Finally, the skewed symmetry surface of the quadric surface solid is obtained. Several examples are used to verify the feasibility of the algorithm and satisfying results can be obtained.
基金supported by the Department of Scientific and Industrial Research(DSIR),India
文摘The present paper discusses the modeling of tool geometry effects on the friction stir aluminum welds using response surface methodology. The friction stir welding tools were designed with different shoulder and tool probe geometries based on a design matrix. The matrix for the tool designing was made for three types of tools, based on three types of probes, with three levels each for defining the shoulder surface type and probe profile geometries. Then, the effects of tool shoulder and probe geometries on friction stirred aluminum welds were experimentally investigated with respect to weld strength, weld cross section area, grain size of weld and grain size of thermo-mechanically affected zone. These effects were modeled using multiple and response surface regression analysis. The response surface regression modeling were found to be appropriate for defining the friction stir weldment characteristics.
基金supported by the National Natural Science Foundation of China general Projects(No.51174193)the Youth Fund Project of the National Natural Science Foundation of China(No.51004102)the National High Technology Research and Development Program of China(No.2012AA062101)
文摘This paper proposes the concept of projection curves based on the theory of CT image reconstruction to probe the internal structure of the working panel prior to formal mining of the working panel.As well as reducing costs,this method provides safe and efficient excavation of the working panel.According to the results of the numerical model and the actual working panel,the new method has been proven to be accurate in detecting the location of the fault that extends into the face.Concealed faults of the internal working panel,as well as the start and end points of the fault,can be detected by this method.Engineering practice has proven that the method is highly reliable,has a highly decisive impact on faults for coal mining,and can be used to guide the safe mining of the working panel.
文摘Acid mine drainage（AMD） is commonly treated by neutralization with alkaline substances.This treatment is supported by titration experiments that illustrate the buffering mechanisms and estimate the base neutralization capacity（BNC） of the AMD.Detailed explanation of titration curves requires modeling with a hydro-chemical model.In this study the titration curves of water samples from the drainage of the As Pontes mine and the corresponding dumps have been investigated and six buffers are selerted by analyzing those curves.Titration curves have been simulated by a reactive transport model to discover the detailed buffering mechanisms.These simulations show seven regions involving different buffering mechanism.The BNC is primarily from buffers of dissolved Fe,Al and hydrogen sulfate.The BNC can be approximated by：BNC = 3（C_（Fe） ＋ C_（Al）） ＋ 0.05C_（sulfate）,where the units are mol/L.The BNC of the sample from the mine is 9.25×10^（-3） mol/L and that of the dumps sample is 1.28×10^（-2） mol/L
