There exist three types of nonlinear problems in large deformation processes of deep softrock engineering, i.e., nonlin- earity caused by material, geometrical and contact boundary. In this paper, the numerical method...There exist three types of nonlinear problems in large deformation processes of deep softrock engineering, i.e., nonlin- earity caused by material, geometrical and contact boundary. In this paper, the numerical method to tackle the nonlinear eontact and large deformation problem in A Software on Large Deformation Analysis for Soft Rock Engineering at Great Depth was presented. In the software, based on Lagrange multiplier method and Coulomb friction law, kinematic constraints on contact boundaries were introduced in functional function, and the finite element equations was established for two incremental large deformation analyses models, polar decomposition model and additive decomposition model. For every incremental loading step, by searching for the contact points in the potential contact interfaces （the excavation boundaries）, the Lagrange multipliers, i.e., contact forces are cal- culated iteratively by Gauss-Seidel method, and justified through satisfy the inequalities of static constraint on contact boundaries. With the software, large deformation and frictional contact of a transport roadway were analyzed numerically by the two models. The numerical examples demonstrated the efficiency of the method used in the software.展开更多
According to the practical conditions of coal roadway in Changcun Coal Mine of Lu＇an Mining Group, the deformation of rock surrounding roadway was experimentally studied by means of thermal infrared （TIP,） imaging ...According to the practical conditions of coal roadway in Changcun Coal Mine of Lu＇an Mining Group, the deformation of rock surrounding roadway was experimentally studied by means of thermal infrared （TIP,） imaging system in the process of confined compressions. It is found that the model surface TIR temperature （TIRT） changes with the increase of load. Furthermore, TIRT changes non-synchronously in different ranges such as the roof, floor, wall, corners and bolted ranges. The TIRT is higher in the location of stress concentration and bolted ranges than that in the location of stress relaxation and broken ranges. The interaction ranges of bolt and rock are determined preliminarily according to the corresponding relationship of TIRT fields and the strain fields of the surrounding rock. The new method of TIR image processing has been proved to be effective for the study of bolt support and observation of roadway stability under mine pressure.展开更多
For the engineering geology conditions of bad mine roadway roof and floor lithology in extremely weak cemented strata, the best section shape of the roadway is determined from the study of tunnel surrounding rock disp...For the engineering geology conditions of bad mine roadway roof and floor lithology in extremely weak cemented strata, the best section shape of the roadway is determined from the study of tunnel surrounding rock displacement, plastic zone and stress distribution in rectangular, circle arch and arch wall sections, respectively. Based on the mining depth and thickness of the coal seam, roadway support technology solutions with different buried depth and thickness of coal seam are proposed. Support schemes are amended and optimized in time through monitoring data of the deformation of roadway, roof separation, l-beam bracket, bolt and anchor cable force to ensure the long-term stability and security of the roadway surrounding rock and support structure. The monitoring results show that mine roadway support schemes for different buried depth and section can be adapted to the characteristics of ground pressure and deformation of the surrounding rock in different depth well, effectively control the roadway surrounding rock deformation and the floor heave and guarantee the safety of construction and basic stability of surrounding rock and support structure.展开更多
The first topic discussed in this paper is to evaluate the present supporting theories,among which the typical two are collapse arch and elasto-plastic theories. The former is rather limited in practical application,a...The first topic discussed in this paper is to evaluate the present supporting theories,among which the typical two are collapse arch and elasto-plastic theories. The former is rather limited in practical application,and the latter is built up on some assumptions which is inconsis-tent with the reality,for it is of no need to support a roadway of which the surrounding rock is in elasto-plastic state. The second topic is to prove the objective existence of the broken zone in surrounding rock(BZSR) by a series of laboratory experiments and field measurements. The paper indicates that the object to be supported mainly is the bulking or expanding force resulted from the development of BZSR. This is remarkably different from the existing points of view which have been generally recognized nowadays. So far ,this theory has been tested in supporting more than ten thousand meters roadways located in various strata and has proved itself to have a great technoeconomical benefit.展开更多
Ground stress is the fundamental cause of deformation and failure during underground structural engineering. Field stress measurements in the main coal bed in the Lueliang mining area were made by the bore hole, stres...Ground stress is the fundamental cause of deformation and failure during underground structural engineering. Field stress measurements in the main coal bed in the Lueliang mining area were made by the bore hole, stress relief method. From these data the ground stress distribution of the mining area was obtained. The relationship between the horizontal principal stress and the deformation and failure of a roadway is discussed with an engineering example. The results indicate that horizontal stress dominates in the shallow crust in the Ltiliang mining area. Roadways at different angles to the maximum principal stress have different levels of stress concentration. This leads to a significant difference in stability of the corresponding roadways. These research results provide an important criterion for determining roadway position and direction, stope layout, and roadway support design.展开更多
基金subsidized by special funds for the National Basic Research Program of China (No.2002cb412708)supported by the Opening Funds of the State Key Laboratory of Hydroscience and Engineering of China (No.sklhse-2007-D-02)
文摘There exist three types of nonlinear problems in large deformation processes of deep softrock engineering, i.e., nonlin- earity caused by material, geometrical and contact boundary. In this paper, the numerical method to tackle the nonlinear eontact and large deformation problem in A Software on Large Deformation Analysis for Soft Rock Engineering at Great Depth was presented. In the software, based on Lagrange multiplier method and Coulomb friction law, kinematic constraints on contact boundaries were introduced in functional function, and the finite element equations was established for two incremental large deformation analyses models, polar decomposition model and additive decomposition model. For every incremental loading step, by searching for the contact points in the potential contact interfaces （the excavation boundaries）, the Lagrange multipliers, i.e., contact forces are cal- culated iteratively by Gauss-Seidel method, and justified through satisfy the inequalities of static constraint on contact boundaries. With the software, large deformation and frictional contact of a transport roadway were analyzed numerically by the two models. The numerical examples demonstrated the efficiency of the method used in the software.
基金Projects 50374069 supported by National Natural Science Foundation of China and 2002CB412701 supported by 973 of China
文摘According to the practical conditions of coal roadway in Changcun Coal Mine of Lu＇an Mining Group, the deformation of rock surrounding roadway was experimentally studied by means of thermal infrared （TIP,） imaging system in the process of confined compressions. It is found that the model surface TIR temperature （TIRT） changes with the increase of load. Furthermore, TIRT changes non-synchronously in different ranges such as the roof, floor, wall, corners and bolted ranges. The TIRT is higher in the location of stress concentration and bolted ranges than that in the location of stress relaxation and broken ranges. The interaction ranges of bolt and rock are determined preliminarily according to the corresponding relationship of TIRT fields and the strain fields of the surrounding rock. The new method of TIR image processing has been proved to be effective for the study of bolt support and observation of roadway stability under mine pressure.
基金Financial support for this work, provided by the Major Program of the National Natural Science Foundation of China (Nos. 51174196 and 51204168)the Program for New Century Excellent Talents in University by Ministry of Education of China (No. NCET-07-0519)
文摘For the engineering geology conditions of bad mine roadway roof and floor lithology in extremely weak cemented strata, the best section shape of the roadway is determined from the study of tunnel surrounding rock displacement, plastic zone and stress distribution in rectangular, circle arch and arch wall sections, respectively. Based on the mining depth and thickness of the coal seam, roadway support technology solutions with different buried depth and thickness of coal seam are proposed. Support schemes are amended and optimized in time through monitoring data of the deformation of roadway, roof separation, l-beam bracket, bolt and anchor cable force to ensure the long-term stability and security of the roadway surrounding rock and support structure. The monitoring results show that mine roadway support schemes for different buried depth and section can be adapted to the characteristics of ground pressure and deformation of the surrounding rock in different depth well, effectively control the roadway surrounding rock deformation and the floor heave and guarantee the safety of construction and basic stability of surrounding rock and support structure.
文摘The first topic discussed in this paper is to evaluate the present supporting theories,among which the typical two are collapse arch and elasto-plastic theories. The former is rather limited in practical application,and the latter is built up on some assumptions which is inconsis-tent with the reality,for it is of no need to support a roadway of which the surrounding rock is in elasto-plastic state. The second topic is to prove the objective existence of the broken zone in surrounding rock(BZSR) by a series of laboratory experiments and field measurements. The paper indicates that the object to be supported mainly is the bulking or expanding force resulted from the development of BZSR. This is remarkably different from the existing points of view which have been generally recognized nowadays. So far ,this theory has been tested in supporting more than ten thousand meters roadways located in various strata and has proved itself to have a great technoeconomical benefit.
基金supported by the National Natural Science Foundation of China (No. 50874103)the National Basic Research Program of China (No. 2010CB226805)+1 种基金the Natural Science Foundation of Jiangsu Province (No. BK2008135)the Open Foundation of State Key Laboratory of Geomechanics and Deep Underground Engineering (No. SKLGDUEK0905)
文摘Ground stress is the fundamental cause of deformation and failure during underground structural engineering. Field stress measurements in the main coal bed in the Lueliang mining area were made by the bore hole, stress relief method. From these data the ground stress distribution of the mining area was obtained. The relationship between the horizontal principal stress and the deformation and failure of a roadway is discussed with an engineering example. The results indicate that horizontal stress dominates in the shallow crust in the Ltiliang mining area. Roadways at different angles to the maximum principal stress have different levels of stress concentration. This leads to a significant difference in stability of the corresponding roadways. These research results provide an important criterion for determining roadway position and direction, stope layout, and roadway support design.
