期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
基于局部探测法的外压球壳屈曲载荷设计方法研究
1
作者 王庆 范海贵 +1 位作者 侯怡航 顾文广 《压力容器》 北大核心 2024年第4期22-33,共12页
由于受外压球形容器的缺陷敏感性不可避免,其屈曲设计是值得关注的课题,因此系统地研究了基于局部探测法的外压条件下的缺陷敏感球壳结构屈曲设计。根据探测结果,提出了3种屈曲载荷设计方法:能量势垒法、最大曲率法、等效缺陷法。在考... 由于受外压球形容器的缺陷敏感性不可避免,其屈曲设计是值得关注的课题,因此系统地研究了基于局部探测法的外压条件下的缺陷敏感球壳结构屈曲设计。根据探测结果,提出了3种屈曲载荷设计方法:能量势垒法、最大曲率法、等效缺陷法。在考虑材料属性影响的基础上,详细介绍了3种屈曲载荷设计方法,并通过具有不同几何缺陷的球壳屈曲响应,对提出的设计方法进行对比与验证。研究结果表明,所提出的屈曲载荷设计方法与现行标准相比,能够针对特定的球壳结构,在考虑缺陷敏感性的前提下,给出精细化的屈曲载荷设计结果。利用3种特定结构对该方法进行验证,每种结构最低试验折减因子分别为0.390,0.224,0.290,而通过文中提出的设计方法计算得到的每种结构最高设计折减因子分别为0.315,0.213,0.171,均低于试验值,体现了提出的设计方法的可靠性。 展开更多
关键词 外压球壳 屈曲设计 缺陷敏感性 局部探测
在线阅读 下载PDF
基于局部表面纳米化薄板的抗屈曲优化设计
2
作者 王伟 倪一文 +3 位作者 赵祯 廉增博 徐新生 林志华 《地震工程与工程振动》 CSCD 北大核心 2019年第6期123-127,共5页
提出一种新的局部表面纳米化薄板抗屈曲设计思路。利用局部表面纳米化技术改变板结构关键部位的力学性能,建立圆板的径向扇形间隔纳米化模型,环向条带环状间隔纳米化模型和片状布局纳米化模型。采用优化设计方法,对圆板抗屈曲问题进行... 提出一种新的局部表面纳米化薄板抗屈曲设计思路。利用局部表面纳米化技术改变板结构关键部位的力学性能,建立圆板的径向扇形间隔纳米化模型,环向条带环状间隔纳米化模型和片状布局纳米化模型。采用优化设计方法,对圆板抗屈曲问题进行数值模拟。结果表明,经局部表面纳米化的薄板可显著提高屈曲临界载荷。这种方法为薄板结构的抗屈曲工程设计提供了依据。 展开更多
关键词 薄板 表面纳米技术 临界载荷 屈曲模态 屈曲优化设计
在线阅读 下载PDF
Global buckling behavior of submarine unburied pipelines under thermal stress 被引量:2
3
作者 郭林坪 刘润 闫澍旺 《Journal of Central South University》 SCIE EI CAS 2013年第7期2054-2065,共12页
Buckling of submarine pipelines under thermal stress is one of the most important problems to be considered in pipeline design. And pipeline with initial imperfections will easily undergo failure due to global bucklin... Buckling of submarine pipelines under thermal stress is one of the most important problems to be considered in pipeline design. And pipeline with initial imperfections will easily undergo failure due to global buckling under thermal stress and internal pressure. Therefore, it is vitally important to study the global buckling of the submarine pipeline with initial imperfections. On the basis of the characteristics of the initial imperfections, the global lateral buckling of submarine pipelines was analyzed. Based on the deduced analytical solutions for the global lateral buckling, effects of temperature difference and properties of foundation soil on pipeline buckling were analyzed. The results show that the snap buckling is predominantly governed by the amplitude value of initial imperfection; the triggering temperature difference of Mode I for pipelines with initial imperfections is higher than that of Mode I1; a pipeline with a larger friction coefficient is safer than that with a smaller one; pipelines with larger initial imperfections are safer than those with smaller ones. 展开更多
关键词 submarine pipeline lateral buckling analytical solution initial imperfection subsoil friction resistance
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部