期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Ti/Al层状复合涂层电极的制备及性能研究 被引量:1
1
作者 张瑾 竺培显 周生刚 《热加工工艺》 CSCD 北大核心 2015年第10期157-160,共4页
利用热压扩散焊接工艺,分别在不同焊接时间条件下制备了结构为Ti/Al/Ti/Sn O2+Sb2O3/Pb O2的层状复合涂层电极,通过扫描电镜分析了Ti/Al基体的组织结构和表面形貌,采用四探针法测量了复合电极基体电阻并测试了电极加速寿命。结果表明:... 利用热压扩散焊接工艺,分别在不同焊接时间条件下制备了结构为Ti/Al/Ti/Sn O2+Sb2O3/Pb O2的层状复合涂层电极,通过扫描电镜分析了Ti/Al基体的组织结构和表面形貌,采用四探针法测量了复合电极基体电阻并测试了电极加速寿命。结果表明:基体焊接时间为120 min时,制备的Ti/Al基复合涂层电极表面活性物质Pb O2颗粒尺寸均匀细小且比表面积大,具有良好的电化学性能;与传统的Ti/Sn O2+Sb2O3/Pb O2相比,电阻率仅为纯Ti的1/10。加速寿命试验测得的电极寿命达46 h,具有良好的稳定性。 展开更多
关键词 Ti/Al层状复合涂层电极 热压扩散焊接 界面电阻 加速寿命
在线阅读 下载PDF
发动机排气门新型抗高温氧化涂层研究
2
作者 杨开舟 赵碎丹 《表面技术》 EI CAS CSCD 北大核心 2017年第4期89-94,共6页
目的提高排气门材料21-4N合金的抗高温氧化腐蚀性能和抗开裂剥落性能,提高排气门的服役性能,延长使用寿命。方法利用两步循环喷雾热解技术在21-4N合金表面制备(Al_2O_3-Y_2O_3)/YSZ层状陶瓷复合涂层,通过扫描电镜和能谱对涂层形貌和成... 目的提高排气门材料21-4N合金的抗高温氧化腐蚀性能和抗开裂剥落性能,提高排气门的服役性能,延长使用寿命。方法利用两步循环喷雾热解技术在21-4N合金表面制备(Al_2O_3-Y_2O_3)/YSZ层状陶瓷复合涂层,通过扫描电镜和能谱对涂层形貌和成分进行分析,通过循环氧化腐蚀实验评价涂层的抗高温氧化腐蚀性能和抗开裂剥落性能,通过划痕测试来评价涂层的结合强度。结果该层状复合涂层厚度均一、结构致密清晰,在900℃高温循环氧化100 h的实验中,该涂层样品的质量增加量和剥落量分别为0.3025和0.06 mg/cm^2,远低于无涂层21-4N合金的质量增加量和剥落量,具有优异的耐高温氧化腐蚀性能。该复合涂层的膜基结合力达到40 N,远高于21-4N合金表面氧化膜的结合力,能够满足排气门实际应用工况要求。结论采用两步循环喷雾热解技术在21-4N合金表面制备的(Al_2O_3-Y_2O_3)/YSZ层状复合涂层,能够有效提高排气门材料的抗高温氧化腐蚀性能,并具有优异的结合力。 展开更多
关键词 发动机排气门 耐高温氧化 层状复合涂层 喷雾热解 循环氧化 划痕测试
在线阅读 下载PDF
Improving the structure and cycling stability of Ni-rich cathodes by dual modification
3
作者 ZHU Zhen-hua XU Shi-jie +3 位作者 ZHANG Qiang-feng ZHU Hai-peng MEI Lin ZHANG Chun-xiao 《Journal of Central South University》 CSCD 2024年第12期4460-4471,共12页
The irreversible phase transition and interface side reactions during the cycling process severely limit the large scale application of nickel-rich layered oxides Li[Ni_(x)Co_(y)Mn_(1−x−y)]O_(2)(NCM,x>0.8).Herein,w... The irreversible phase transition and interface side reactions during the cycling process severely limit the large scale application of nickel-rich layered oxides Li[Ni_(x)Co_(y)Mn_(1−x−y)]O_(2)(NCM,x>0.8).Herein,we have designed LiNi_(0.8)Co_(0.1)Mn 0.1 O_(2)cathodes modified by Nb/Al co-doping and LiNbO_(3)/LiAlO_(2)composite coating.Detailed characterization reveals that Nb/Al co-doping can stabilize the crystal structure of the cathodes and expand the layer spacing of the layered lattice,thereby increasing the diffusion rate and reversibility of Li^(+).And the composite coatings can improve the electrochemical kinetic and inhibit the erosion of acidic substances by hindering direct contact between the cathodes and electrolyte.As a result,the Ni-rich cathodes with dual modification can still exhibit a higher capacity of 184.02 mA·h/g after 100 cycles with a capacity retention of up to 98.1%,and can still release a capacity of 161.6 mA·h/g at a high rate of 7 C,meanwhile,it shows excellent thermal stability compared to bare NCM.This work provides a new perspective for enhancing electrochemical properties of cathodes through integrated strategies. 展开更多
关键词 Ni-rich layered cathode dual element doping composite coating structural stability electrochemical performance
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部