期刊文献+
共找到9篇文章
< 1 >
每页显示 20 50 100
超声辅助-固相分散溶液提取离子色谱法测定染发剂中的9种染料中间体 被引量:9
1
作者 钟志雄 罗志彬 朱炳辉 《中国无机分析化学》 CAS 2012年第3期31-34,共4页
建立了提取和清洗整合成一步的超声辅助-固相分散溶液提取离子色谱法测定染发剂中的9种染料中间体的方法。样品基质经分散后,测定组分进入溶液,油脂溶解在正己烷中,干扰化合物被分散剂吸附。在振荡、超声和加热的协同作用下,9min内快速... 建立了提取和清洗整合成一步的超声辅助-固相分散溶液提取离子色谱法测定染发剂中的9种染料中间体的方法。样品基质经分散后,测定组分进入溶液,油脂溶解在正己烷中,干扰化合物被分散剂吸附。在振荡、超声和加热的协同作用下,9min内快速完成提取,具有高的样品处理效率。用离子色谱法测定商业染发剂中的中间体以确定方法的提取效率。方法的线性范围为0.2~100mg/L,检出限0.019~0.048mg/L,回收率85.0%~107.0%,相对标准偏差0.3%~3.7%。实验结果表明,方法简单、可靠,适用于大批量样品的常规分析。 展开更多
关键词 超声辅助-相分散溶液提取法 离子色谱 染料中间体 染发剂
在线阅读 下载PDF
液-固-溶液法制备ZnSe∶Fe纳米晶及其光学性能研究 被引量:2
2
作者 刘凌云 谢瑞士 +2 位作者 陈强 肖定全 朱建国 《功能材料》 EI CAS CSCD 北大核心 2011年第5期933-935,939,共4页
采用液-固-溶液(LSS)法制备了ZnSe∶Fe纳米晶,利用X射线粉末衍射(XRD)技术、透射电子显微镜(TEM)、光致发光(PL)谱、紫外-可见吸收(UV-Vis)光谱以及傅里叶变换红外(FT-IR)光谱对所制备样品的结构和光学性质进行了表征,研究了掺杂Fe离子... 采用液-固-溶液(LSS)法制备了ZnSe∶Fe纳米晶,利用X射线粉末衍射(XRD)技术、透射电子显微镜(TEM)、光致发光(PL)谱、紫外-可见吸收(UV-Vis)光谱以及傅里叶变换红外(FT-IR)光谱对所制备样品的结构和光学性质进行了表征,研究了掺杂Fe离子对ZnSe纳米晶光学性质的影响规律。实验结果表明所制备的ZnSe∶Fe纳米晶为立方闪锌矿结构,粒径在3.5~4.5nm之间,与纯ZnSe相比,ZnSe∶Fe纳米晶表现出明显的荧光增强现象,随掺杂Fe离子的浓度的不同,其荧光峰位和强度均有变化。UV-Vis吸收谱表明ZnSe∶Fe纳米晶在410nm附近出现吸收峰,与ZnSe体材料相比有明显蓝移,为量子尺寸效应所致。利用Tauc关系计算了ZnSe∶Fe纳米晶的能隙,为3.4eV。 展开更多
关键词 液--溶液(LSS)法 硒化锌 纳米晶 光学性能
在线阅读 下载PDF
Na_(5)YSi_(4)O_(12)基陶瓷固态钠电池电解质的制备及导电行为研究 被引量:1
3
作者 徐瑶 刘立敏 +3 位作者 周晓亮 郭炜琳 李婕 郭心如 《陶瓷学报》 CAS 北大核心 2024年第3期483-491,共9页
钠离子固态电解质虽然已经被研究了多年,但其室温电导率低,且与有机液态电解液电导率相差一个数量级,这些缺陷成为限制其实际应用的主要障碍。为此,以Na_(5)YSi_(4)O_(12)基陶瓷电解质作为研究对象,以NaNO_(3)、YN_(3)O_(9)·6H_(2)... 钠离子固态电解质虽然已经被研究了多年,但其室温电导率低,且与有机液态电解液电导率相差一个数量级,这些缺陷成为限制其实际应用的主要障碍。为此,以Na_(5)YSi_(4)O_(12)基陶瓷电解质作为研究对象,以NaNO_(3)、YN_(3)O_(9)·6H_(2)O和C8H20O4Si为原料,采用溶液辅助的固相反应法(SASSR)制备具有六方晶系结构的高性能固态陶瓷电解质Na_(5)YSi_(4)O_(12)材料。研究了Na_(5)YSi_(4)O_(12)(NYS)的烧结温度、保温时间与离子电导率之间的关系。研究发现,样品经1050℃保温6 h后的离子电导率最高为1.52 mS·cm^(−1),活化能为0.215 eV。相比于传统的固相反应法制备的材料,电导率得到了较大的提升。其较高的电导率得益于Na_(5)YSi_(4)O_(12)粉体烧结活性高和独特的3D传输通道,材料中Na^(+)既可沿着通道传输,也可在不同的通道间进行跨越传输,从而赋予了材料较高的电导率。研究表明Na_(5)YSi_(4)O_(12)是一种很有潜质的快钠离子导体。 展开更多
关键词 钠离子电池 态电解质 Na_(5)YSi_(4)O_(12) 离子电导率 溶液辅助的相反应法
在线阅读 下载PDF
氧化石墨烯-离子液体溶液在金属界面的超滑机理研究 被引量:6
4
作者 葛翔宇 柴志远 +2 位作者 石秋雨 刘燕斐 王文中 《摩擦学学报》 EI CAS CSCD 北大核心 2023年第3期263-273,共11页
利用氧化石墨烯(GO)纳米片作为离子液体水溶液[IL(aq)]添加剂制得IL(aq)+GO复合溶液.利用该溶液润滑轴承钢摩擦副时获得了超低的摩擦系数(μ≈0.009),达到超滑水平.分析结果表明,IL在轴承钢表面形成的化学反应膜(含磷化物和氟化物等)和... 利用氧化石墨烯(GO)纳米片作为离子液体水溶液[IL(aq)]添加剂制得IL(aq)+GO复合溶液.利用该溶液润滑轴承钢摩擦副时获得了超低的摩擦系数(μ≈0.009),达到超滑水平.分析结果表明,IL在轴承钢表面形成的化学反应膜(含磷化物和氟化物等)和流体膜具有较好的减摩性,但摩擦系数无法达到超滑水平.而GO在轴承钢表面形成的GO吸附膜可承担部分载荷,并将剪切界面从钢/钢界面转变为GO层间低剪切滑移,进一步降低接触区的摩擦阻力,进而实现超滑.该研究中利用二维材料和液体分子的共同作用在金属摩擦副上实现超滑,为固-液复合溶液以及超滑的工程应用提供研究基础. 展开更多
关键词 超滑 减摩 氧化石墨烯 离子液体 -液复合溶液
在线阅读 下载PDF
贵金属与稀土金属的相互作用:(Ⅳ)Pt-RE系 被引量:20
5
作者 宁远涛 《贵金属》 CAS CSCD 北大核心 2000年第4期43-48,共6页
根据现有的相图与中间相资料 ,绘制了Pt-RE系相图简并示意图 ,讨论了Pt与RE间相互固溶度、共晶反应与包晶反应 ,评述了主要中间相的结构特征及相稳定性。
关键词 稀土金属 合金化 固溶液 金属间化合物
在线阅读 下载PDF
聚酰胺46的合成与结构研究1.合成条件对产物分子量的影响 被引量:4
6
作者 王群 邵正中 于同隐 《功能高分子学报》 CAS CSCD 1997年第1期72-78,共7页
合成了高性能工程塑料聚酰胺46并进行了基本表征。讨论了界面缩聚和溶液-固相缩聚时,有机相溶剂类型、单体浓度比、固相缩聚温度、真空度。
关键词 合成 PA-46 界面缩聚 溶液-相缩聚 聚酰胺
在线阅读 下载PDF
A dramatic improvement in the tensile strength of fullerene needle-like crystals
7
作者 Toshio Konno Takatsugu Wakahara +1 位作者 Kun'ichi Miyazawa Kazuhiro Marumoto 《新型炭材料》 SCIE EI CAS CSCD 北大核心 2018年第4期310-315,共6页
Needle-like crystals consisting of a solid solution of C(60)-C(70)fullerene were synthesized by a liquid-liquid interfacial precipitation method using toluene and 2-propanol as solvents.A machined crystal with a V-not... Needle-like crystals consisting of a solid solution of C(60)-C(70)fullerene were synthesized by a liquid-liquid interfacial precipitation method using toluene and 2-propanol as solvents.A machined crystal with a V-notch was placed in a focused ion beam scanning electron microscope where it was bent until fracture by pushing it with a molybdenum probe to measure its mechanical properties and its fracture surface was examined.The crystals had a tensile strength of 58-71 MPa,which is much higher than C60 fullerene needle-like crystals and slightly larger than alumina,and a fracture toughness of 1.1-1.3 MPa m(1/2).Moreover,it is possible to change the plasticity and fracture toughness of the C(60)-C(70)crystals by solvation of different numbers of fullerene molecules.The C(60)-C(70)fullerene crystals have the potential for use as electrodes,anchors for brittle materials,and ductile wires to carry electricity. 展开更多
关键词 Fullerene nanowhisker Solid solution Liquid-liquid interfacial precipitation Tensile strength Fracture toughness
在线阅读 下载PDF
Competitive adsorption of Cu(II) and Pb(II) ions from aqueous solutions by Ca-alginate immobilized activated carbon and Saccharomyces cerevisiae 被引量:1
8
作者 卢明 刘云国 +4 位作者 胡新将 贲月 曾晓霞 李婷婷 王慧 《Journal of Central South University》 SCIE EI CAS 2013年第9期2478-2488,共11页
To establish a theoretical foundation for simultaneous removal of multi-heavy metals,the adsorption of Cu(Ⅱ) and Pb(Ⅱ) ions from their single and binary systems by Ca-alginate immobilized activated carbon and Sa... To establish a theoretical foundation for simultaneous removal of multi-heavy metals,the adsorption of Cu(Ⅱ) and Pb(Ⅱ) ions from their single and binary systems by Ca-alginate immobilized activated carbon and Saccharomyces cerevisiae (CAS) was investigated.The CAS beads were characterized by Scanning electron microscope (SEM) and Fourier transformed infrared spectroscopy (FTTR).The effect of initial pH,adsorbent dosage,contact time and initial metal ions concentration on the adsorption process was systematically investigated.The experimental maximum contents of Cu(Ⅱ) and Pb(Ⅱ) uptake capacity were determined as 64.90 and 166.31 mg/g,respectively.The pseudo-second-order rate equation and Langmuir isotherm model could explain respectively the kinetic and isotherm experimental data of Cu(Ⅱ) and Pb(Ⅱ) ions in single-component systems with much satisfaction.The experimental adsorption data of Cu(Ⅱ) and Pb(Ⅱ) ions in binary system were best described by the extended Freundlich isotherm and the extended Langmuir isotherm,respectively.The removal of Cu(lⅡ) ions was more significantly influenced by the presence of the coexistent Pb(Ⅱ) species,while the Pb(Ⅱ) removal was affected slightly by varying the initial concentration of Cu(Ⅱ).The CAS was successfully regenerated using 1 mol/L HNO3 solution. 展开更多
关键词 competitive adsorption Cu(Ⅱ) Pb(Ⅱ) Saccharomyces cerevisiae kinetics equilibrium isotherms
在线阅读 下载PDF
Electro-osmotic chemical behavior of clayey soil under various boundary conditions 被引量:1
9
作者 XUE Zhi-jia XIONG Qi 《Journal of Central South University》 SCIE EI CAS CSCD 2021年第5期1493-1504,共12页
The use of electro-osmotic chemical is an effective method to improve the clayey soil foundation.Various boundary conditions can be adopted in this method.In this work,two electrode–clay contacts,three solution condi... The use of electro-osmotic chemical is an effective method to improve the clayey soil foundation.Various boundary conditions can be adopted in this method.In this work,two electrode–clay contacts,three solution conditioners,and four anode solution supply times were used for clayey soil improvement.Based on the experimental data,electro-osmotic consolidation theory,and transport of ion theory,it is found that the electro-osmotic chemical effect of the separation of electrode–clay(E_S)is more beneficial for the transport of Ca^(2+),production of cementing material,and reduction of water content than that of electrode–clay(E_C)joining;through electrode–clay contact separation,the anode solution conditioner(NaPO3)6(E_SHMP)delayed the cementing reaction and then increased the transport of Ca^(2+)near the cathode,which increased the amount of cementing material and the electro-osmotic chemical effect;and when the anode conditioner(NaPO3)6 was used,two days of anode solution supply followed by three days cut off from the anode solution led to the highest undrained shear strength increase after the application of electro-osmotic chemical,which resolved the uneven electro-osmotic chemical effect in the E_SHMP. 展开更多
关键词 electro-osmotic chemical boundary conditions clayey soil improvement electrode−clay contacts solution conditioner anode solution supply time
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部