As a miniaturized direct injection(DI)solution,a self-pressurized injector is of great significance for small aviation piston engines,such as spark-ignited two-stroke heavy-fuel engines.The spray characteristics of DI...As a miniaturized direct injection(DI)solution,a self-pressurized injector is of great significance for small aviation piston engines,such as spark-ignited two-stroke heavy-fuel engines.The spray characteristics of DI injectors are an important application prerequisite.In this paper,the computational fluid dynamics(CFD)software AVL Fire is employed to study the spray characteristics.Two types of spray models are established based on the Han Sheet model and the KH-RT model,and simulation works are carried out according to two types of spray tests in the literature.The comparison results show that in the constant volume bomb test,the spray patterns obtained by simulation under the two sets of environmental pressures are similar to those in the experiment,and the simulation spray using the KH-RT model can fit the spray contraction of the near nozzle field and the vortex of the far nozzle field better.In the tube test,the spray patterns obtained by simulation under the five sets of flow velocity are similar to those in the experiment,and the simulation spray using the KH-RT model can fit the spray expansion and the vortex of the far nozzle field better.The RP-3 kerosene spray characteristics of the self-pressurized injector are also experimentally studied,and the results demonstrate that due to the higher viscosity of kerosene,the spray shrinks more easily,resulting in a smaller spray cone angle and larger penetration.Therefore,changes in environmental pressure have greater impact on the kerosene spray pattern.展开更多
In order to improve the utilization rate of foam,an arc jet nozzle was designed for precise dust control.Through theoretical analysis,the different demands of foam were compared amongst arc jets,flat jets and full con...In order to improve the utilization rate of foam,an arc jet nozzle was designed for precise dust control.Through theoretical analysis,the different demands of foam were compared amongst arc jets,flat jets and full cone jets when the dust source was covered identically by foam.It is proved that foam consumption was least when an arc jet was used.Foam production capability of an arc jet nozzle under different conditions was investigated through experiments.The results show that with the gas liquid ratio(GLR)increasing,the spray state of an arc jet nozzle presents successively water jet,foam jet and mist.Under a reasonable working condition range of foam production and a fixed GLR,foam production quantity increases at first,and then decreases with the increase of liquid supply quantity.When the inner diameter of the nozzle is 14 mm,the best GLR is 30 and the optimum liquid supply quantity is0.375 m^3/h.The results of field experiments show that the total dust and respirable dust suppression efficiency of arc jet nozzles is 85.8%and 82.6%respectively,which are 1.39 and 1.37 times higher than the full cone nozzles and 1.20 and 1.19 times higher than the fiat nozzles.展开更多
基金supported by the National Natural Science Foundation of China(No.51865031)the State Key Laboratory of Engines of Tianjin University(No.K2020-05)the Natural Science Foundation of the Jiangsu Higher Education Institutions of China(No.20KJB470014)。
文摘As a miniaturized direct injection(DI)solution,a self-pressurized injector is of great significance for small aviation piston engines,such as spark-ignited two-stroke heavy-fuel engines.The spray characteristics of DI injectors are an important application prerequisite.In this paper,the computational fluid dynamics(CFD)software AVL Fire is employed to study the spray characteristics.Two types of spray models are established based on the Han Sheet model and the KH-RT model,and simulation works are carried out according to two types of spray tests in the literature.The comparison results show that in the constant volume bomb test,the spray patterns obtained by simulation under the two sets of environmental pressures are similar to those in the experiment,and the simulation spray using the KH-RT model can fit the spray contraction of the near nozzle field and the vortex of the far nozzle field better.In the tube test,the spray patterns obtained by simulation under the five sets of flow velocity are similar to those in the experiment,and the simulation spray using the KH-RT model can fit the spray expansion and the vortex of the far nozzle field better.The RP-3 kerosene spray characteristics of the self-pressurized injector are also experimentally studied,and the results demonstrate that due to the higher viscosity of kerosene,the spray shrinks more easily,resulting in a smaller spray cone angle and larger penetration.Therefore,changes in environmental pressure have greater impact on the kerosene spray pattern.
基金supported by the National Natural Science Foundation of China(No.51474216)
文摘In order to improve the utilization rate of foam,an arc jet nozzle was designed for precise dust control.Through theoretical analysis,the different demands of foam were compared amongst arc jets,flat jets and full cone jets when the dust source was covered identically by foam.It is proved that foam consumption was least when an arc jet was used.Foam production capability of an arc jet nozzle under different conditions was investigated through experiments.The results show that with the gas liquid ratio(GLR)increasing,the spray state of an arc jet nozzle presents successively water jet,foam jet and mist.Under a reasonable working condition range of foam production and a fixed GLR,foam production quantity increases at first,and then decreases with the increase of liquid supply quantity.When the inner diameter of the nozzle is 14 mm,the best GLR is 30 and the optimum liquid supply quantity is0.375 m^3/h.The results of field experiments show that the total dust and respirable dust suppression efficiency of arc jet nozzles is 85.8%and 82.6%respectively,which are 1.39 and 1.37 times higher than the full cone nozzles and 1.20 and 1.19 times higher than the fiat nozzles.
