In this work,the chromium aluminum nitride(CrAlN)coatings were prepared on TC11 titanium alloy by composite magnetic field cathodic arc ion plating with controllable pulse electromagnetic combined with permanent magne...In this work,the chromium aluminum nitride(CrAlN)coatings were prepared on TC11 titanium alloy by composite magnetic field cathodic arc ion plating with controllable pulse electromagnetic combined with permanent magnet.The effects of electromagnetic frequency on the morphology,microstructure,nano-hardness and elastic modulus of the coatings were investigated by scanning electron microscope(SEM),X-ray diffraction(XRD)and nano-indenter.This paper has mainly studied the influence of CrAlN coatings which are prepared at various electromagnetic frequencies on the wear and erosion resistance through a series of wear and solid particle erosion experiments.It was found that the deposition rate of CrAlN coatings increases with the increase of electromagnetic frequency.And CrAlN coatings all preferentially grew along the(111)crystal plane.At 16.7 Hz,with the increase of pulsed electromagnetic frequency,the hardness is the highest(23.6 GPa)and the adhesion is the highest(41.5 N).In addition,the coating deposition exhibited the best wear and solid erosion resistance at 16.7 Hz and 33.3 Hz,the friction coefficient is about 0.35,and the erosion rate is about 0.2μm/g at 30°and less than 1μm/g at 90°,respectively.These results indicate that the CrAlN coating formed at an appropriate pulsed electromagnetic frequency can achieve excellent mechanical properties,wear and solid erosion resistance.展开更多
Visible-light-driven ZnGaNO solid solution–carbon nitride intercalation compound(CNIC) composite photocatalyst was synthesized via a mixing and heating method. The composite photocatalyst was characterized by X-ray d...Visible-light-driven ZnGaNO solid solution–carbon nitride intercalation compound(CNIC) composite photocatalyst was synthesized via a mixing and heating method. The composite photocatalyst was characterized by X-ray diffraction(XRD), field-emission scanning electron microscopy(FESEM), high-resolution transmission electron microscopy(HRTEM), Fourier transform infrared(FT-IR) spectroscopy, UV-vis diffuse reflection spectroscopy, X-ray photoelectron spectroscopy(XPS), photoluminescence(PL) spectroscopy and BET surface area measurements. The activity of ZnGaNO–CNIC composite photocatalyst for photodegradation of methyl orange(MO) is higher than that of either single-phase CNIC or ZnGaNO solid solution. The as-prepared composite photocatalysts exhibit an improved photocatalytic activity due to enhancement for the separation and transport of photo-generated electron–hole pairs.展开更多
Novel organic-inorganic composite photocatalyst offers new opportunities in the practical applications of photocatalysis. Novel visible light-induced Cr-doped Sr Ti O3–carbon nitride intercalation compound(CNIC) comp...Novel organic-inorganic composite photocatalyst offers new opportunities in the practical applications of photocatalysis. Novel visible light-induced Cr-doped Sr Ti O3–carbon nitride intercalation compound(CNIC) composite photocatalysts were synthesized. The composite photocatalyst was characterized by X-ray diffraction(XRD), field-emission scanning electron microscopy(FESEM), high-resolution transmission electron microscopy(HRTEM), Fourier transform infrared(FT-IR) spectroscopy, UV-vis diffuse reflection spectroscopy, photoluminescence(PL) spectroscopy, and BET surface area analyzer. The photocatalytic oxidation ability of the novel composite photocatalyst was evaluated using methyl orange(MO) as a target pollutant. The photocatalysts exhibited a significantly enhanced photocatalytic performance in degrading MO. For maximizing the photodegradation activity of the composite photocatalysts, the optimal CNIC content was determined. The improved photocatalytic activity of the as-prepared Cr-doped Sr Ti O3–CNIC composite photocatalyst may be attributed to the enhancement of photo-generated electron–hole separations at the interface.展开更多
基金Projects(2017GDAS CX-0202,2017GDAS CX-0111,2018 GDAS CX-0402) supported by Guangdong Academy of Science’ Special Project of Science and Technology Development,ChinaProject(2014B070705007) supported by Guangdong Science and Technology Plan Project,China+1 种基金Project(2016A030312015) supported by Scientific Research Fund of Guangdong Province,ChinaProject(2017A070701027) supported by Guangdong Science and Technology Program,China。
文摘In this work,the chromium aluminum nitride(CrAlN)coatings were prepared on TC11 titanium alloy by composite magnetic field cathodic arc ion plating with controllable pulse electromagnetic combined with permanent magnet.The effects of electromagnetic frequency on the morphology,microstructure,nano-hardness and elastic modulus of the coatings were investigated by scanning electron microscope(SEM),X-ray diffraction(XRD)and nano-indenter.This paper has mainly studied the influence of CrAlN coatings which are prepared at various electromagnetic frequencies on the wear and erosion resistance through a series of wear and solid particle erosion experiments.It was found that the deposition rate of CrAlN coatings increases with the increase of electromagnetic frequency.And CrAlN coatings all preferentially grew along the(111)crystal plane.At 16.7 Hz,with the increase of pulsed electromagnetic frequency,the hardness is the highest(23.6 GPa)and the adhesion is the highest(41.5 N).In addition,the coating deposition exhibited the best wear and solid erosion resistance at 16.7 Hz and 33.3 Hz,the friction coefficient is about 0.35,and the erosion rate is about 0.2μm/g at 30°and less than 1μm/g at 90°,respectively.These results indicate that the CrAlN coating formed at an appropriate pulsed electromagnetic frequency can achieve excellent mechanical properties,wear and solid erosion resistance.
基金Project(51208102)supported by the National Natural Science Foundation of China
文摘Visible-light-driven ZnGaNO solid solution–carbon nitride intercalation compound(CNIC) composite photocatalyst was synthesized via a mixing and heating method. The composite photocatalyst was characterized by X-ray diffraction(XRD), field-emission scanning electron microscopy(FESEM), high-resolution transmission electron microscopy(HRTEM), Fourier transform infrared(FT-IR) spectroscopy, UV-vis diffuse reflection spectroscopy, X-ray photoelectron spectroscopy(XPS), photoluminescence(PL) spectroscopy and BET surface area measurements. The activity of ZnGaNO–CNIC composite photocatalyst for photodegradation of methyl orange(MO) is higher than that of either single-phase CNIC or ZnGaNO solid solution. The as-prepared composite photocatalysts exhibit an improved photocatalytic activity due to enhancement for the separation and transport of photo-generated electron–hole pairs.
基金Project(51208102)supported by the National Natural Science Foundation of China
文摘Novel organic-inorganic composite photocatalyst offers new opportunities in the practical applications of photocatalysis. Novel visible light-induced Cr-doped Sr Ti O3–carbon nitride intercalation compound(CNIC) composite photocatalysts were synthesized. The composite photocatalyst was characterized by X-ray diffraction(XRD), field-emission scanning electron microscopy(FESEM), high-resolution transmission electron microscopy(HRTEM), Fourier transform infrared(FT-IR) spectroscopy, UV-vis diffuse reflection spectroscopy, photoluminescence(PL) spectroscopy, and BET surface area analyzer. The photocatalytic oxidation ability of the novel composite photocatalyst was evaluated using methyl orange(MO) as a target pollutant. The photocatalysts exhibited a significantly enhanced photocatalytic performance in degrading MO. For maximizing the photodegradation activity of the composite photocatalysts, the optimal CNIC content was determined. The improved photocatalytic activity of the as-prepared Cr-doped Sr Ti O3–CNIC composite photocatalyst may be attributed to the enhancement of photo-generated electron–hole separations at the interface.
