Based on the coupling mode theory that the coupling ratio of fiber coupler changes periodically with center distance of two optical fibers, a novel manufacturing method of optical fiber couplers was developed with fus...Based on the coupling mode theory that the coupling ratio of fiber coupler changes periodically with center distance of two optical fibers, a novel manufacturing method of optical fiber couplers was developed with fused biconical taper experimental system. Its fabrication process is that the fiber is fused but not stretched when light begins to split, and the reduction of diameter of fiber is dependent on the theological characteristic of the fused fiberglass. The performance of the coupler was tested. The results show that the performance of the novel optical fiber coupler meets the performance expectations, and its diameter of coupling region （about 30 μm） is twice as long as that of classical fused biconical taper coupler （about 16 μm）, so the default, that is, the device is easy to fracture, is restrained and the reliability is greatly improved.展开更多
The main methods of the second phase quantitative analysis in current material science researches are manual recognition and extracting by using software such as Image Tool and Nano Measurer. The weaknesses such as hi...The main methods of the second phase quantitative analysis in current material science researches are manual recognition and extracting by using software such as Image Tool and Nano Measurer. The weaknesses such as high labor intensity and low accuracy statistic results exist in these methods. In order to overcome the shortcomings of the current methods, the Ω phase in A1-Cu-Mg-Ag alloy is taken as the research object and an algorithm based on the digital image processing and pattern recognition is proposed and implemented to do the A1 alloy TEM （transmission electron microscope） digital images process and recognize and extract the information of the second phase in the result image automatically. The top-hat transformation of the mathematical morphology, as well as several imaging processing technologies has been used in the proposed algorithm. Thereinto, top-hat transformation is used for elimination of asymmetric illumination and doing Multi-layer filtering to segment Ω phase in the TEM image. The testing results are satisfied, which indicate that the Ω phase with unclear boundary or small size can be recognized by using this method. The omission of these two kinds of Ω phase can be avoided or significantly reduced. More Ω phases would be recognized （growing rate minimum to 2% and maximum to 400% in samples）, accuracy of recognition and statistics results would be greatly improved by using this method. And the manual error can be eliminated. The procedure recognizing and making quantitative analysis of information in this method is automatically completed by the software. It can process one image, including recognition and quantitative analysis in 30 min, but the manual method such as using Image Tool or Nano Measurer need 2 h or more. The labor intensity is effectively reduced and the working efficiency is greatly improved.展开更多
基金Project(50235040) supported by the National Natural Science Foundation of China projected(NCET-040753) supporteby the Programof New Century Excellent Talents in University project(20050533037) supported by the Research Fund for the DoctoraProgramof Higher Education
文摘Based on the coupling mode theory that the coupling ratio of fiber coupler changes periodically with center distance of two optical fibers, a novel manufacturing method of optical fiber couplers was developed with fused biconical taper experimental system. Its fabrication process is that the fiber is fused but not stretched when light begins to split, and the reduction of diameter of fiber is dependent on the theological characteristic of the fused fiberglass. The performance of the coupler was tested. The results show that the performance of the novel optical fiber coupler meets the performance expectations, and its diameter of coupling region （about 30 μm） is twice as long as that of classical fused biconical taper coupler （about 16 μm）, so the default, that is, the device is easy to fracture, is restrained and the reliability is greatly improved.
基金Project(51171209)supported by the National Natural Science Foundation of China
文摘The main methods of the second phase quantitative analysis in current material science researches are manual recognition and extracting by using software such as Image Tool and Nano Measurer. The weaknesses such as high labor intensity and low accuracy statistic results exist in these methods. In order to overcome the shortcomings of the current methods, the Ω phase in A1-Cu-Mg-Ag alloy is taken as the research object and an algorithm based on the digital image processing and pattern recognition is proposed and implemented to do the A1 alloy TEM （transmission electron microscope） digital images process and recognize and extract the information of the second phase in the result image automatically. The top-hat transformation of the mathematical morphology, as well as several imaging processing technologies has been used in the proposed algorithm. Thereinto, top-hat transformation is used for elimination of asymmetric illumination and doing Multi-layer filtering to segment Ω phase in the TEM image. The testing results are satisfied, which indicate that the Ω phase with unclear boundary or small size can be recognized by using this method. The omission of these two kinds of Ω phase can be avoided or significantly reduced. More Ω phases would be recognized （growing rate minimum to 2% and maximum to 400% in samples）, accuracy of recognition and statistics results would be greatly improved by using this method. And the manual error can be eliminated. The procedure recognizing and making quantitative analysis of information in this method is automatically completed by the software. It can process one image, including recognition and quantitative analysis in 30 min, but the manual method such as using Image Tool or Nano Measurer need 2 h or more. The labor intensity is effectively reduced and the working efficiency is greatly improved.
