为了提升微结构注塑机的成型精度,提高合模系统的合模力稳定性和运动特性尤为重要。文章设计了由伺服电机驱动的1300 k N微结构注塑机的合模系统。在此基础上,建立了该系统的三维几何模型,并在Adams虚拟样机环境中对开合模过程进行了多...为了提升微结构注塑机的成型精度,提高合模系统的合模力稳定性和运动特性尤为重要。文章设计了由伺服电机驱动的1300 k N微结构注塑机的合模系统。在此基础上,建立了该系统的三维几何模型,并在Adams虚拟样机环境中对开合模过程进行了多体系统动力学及运动学仿真。仿真结果表明,在移模速度600 mm/s时,合模系统的开合模运动保持相对平稳。这对于保证制品质量和提高成型加工效率具有重要意义。此研究为提高微结构注塑机合模系统的设计精度和成型质量提供了理论依据。展开更多
During the propagation of high-power lasers within internal channels,the laser beam heats the propagation medium,causing the thermal blooming effect that degrades the beam quality at the output.The intricate configura...During the propagation of high-power lasers within internal channels,the laser beam heats the propagation medium,causing the thermal blooming effect that degrades the beam quality at the output.The intricate configuration of the optical path within the internal channel necessitates complex and time-consuming efforts to assess the impact of thermal blooming effect on the optical path.To meet the engineering need for rapid evaluation of thermal blooming effect in optical paths,this study proposed a rapid simulation method for the thermal blooming effect in internal optical paths based on the finite element method.This method discretized the fluid region into infinitesimal elements and employed finite element method for flow field analysis.A simplified analytical model of the flow field region in complex internal channels was established,and regions with similar thermal blooming effect were divided within this model.Based on the calculated optical path differences within these regions,numerical simulations of phase distortion caused by thermal blooming were conducted.The calculated result were compared with those obtained using the existing methods.The findings reveal that for complex optical paths,the discrepancy between the two approaches is less than 3.6%,with similar phase distortion patterns observed.For L-type units,this method and the existing methods identify the same primary factors influencing aberrations and exhibit consistent trends in their variation.This method was used to analyze the impact of thermal blooming effect in a straight channel under different gravity directions.The results show that phase distortion varies with changes in the direction of gravity,and the magnitude of the phase difference is strongly correlated with the component of gravity perpendicular to the optical axis.Compared to the existing methods,this approach offers greater flexibility,obviates the need for complex custom analysis programming.The analytical results of this method enable a rapid assessment of the thermal blooming effect in optical paths within the internal channel.This is especially useful during the engineering design.These results also provide crucial references for developing strategies to suppress thermal blooming effect.展开更多
A 499.8 MHz SOLEIL-type superconducting cavity was simulated and designed for the first time in this paper.The higher-order mode(HOM)properties of the cavity were investigated.Two kinds of coaxial HOM couplers were de...A 499.8 MHz SOLEIL-type superconducting cavity was simulated and designed for the first time in this paper.The higher-order mode(HOM)properties of the cavity were investigated.Two kinds of coaxial HOM couplers were designed.Using 4 L-type and 4 T-type HOM couplers,the longitudinal impedance and the transverse impedances were suppressed to below 3 kΩand 30 kΩ/m,respectivly.The HOM damping requirements of Hefei Advanced Light Facility(HALF)were satisfied.This paper conducted an in-depth study on the radio frequency(RF)design,multipacting optimization,and thermal analysis of these coaxial couplers.Simulation results indicated that under operating acceleration voltage,the optimized couplers does not exhibit multiplicating or thermal breakdown phenomena.The cavity has the potential to reach a higher acceleration gradient.展开更多
This work addresses the saturation influence of control voltage on the occurring of self-excited vibration of maglev vehicle-bridge interaction system, which greatly degrades the stability of the levitation control, d...This work addresses the saturation influence of control voltage on the occurring of self-excited vibration of maglev vehicle-bridge interaction system, which greatly degrades the stability of the levitation control, decreases the ride comfort, and restricts the cost of the whole system. Firstly, the interaction model of vehicle-bridge system is developed. Based on the interaction model, the relationship between the control voltage and vibration frequency is solved. Then, the variation of the effective direct component and fundamental harmonic are discussed. Furthermore, from the perspective of energy transmission between the levitation system and bridge, the principle underlying the self-excited vibration is explored, and the influence on the stability is discussed. Finally, in terms of the variation of the characteristic roots, the influence is analyzed further and some conclusions are obtained. This study provides a theoretical guidance for mastering the self-excited vibration problems.展开更多
An integrated evaluation system under randomness and fuzziness was developed in this work to systematically assess the risk of groundwater contamination in a little town, Central China. In this system, randomness of t...An integrated evaluation system under randomness and fuzziness was developed in this work to systematically assess the risk of groundwater contamination in a little town, Central China. In this system, randomness of the parameters and the fuzziness of the risk were considered simultaneously, and the exceeding standard probability of contamination and human health risk due to the contamination were integrated. The contamination risk was defined as a combination of "vulnerability" and "hazard". To calculate the value of "vulnerability", pollutant concentration was simulated by MODFLOW with random input variables and a new modified health risk assessment(MRA) model was established to analyze the level of "hazard". The limit concentration based on environmental-guideline and health risk due to manganese were systematically examined to obtain the general risk levels through a fuzzy rule base. The "vulnerability" and "hazard" were divided into five categories of "high", "medium-high", "medium", "low-medium" and "low", respectively. Then, "vulnerability" and "hazard" were firstly combined by integrated evaluation. Compared with the other two scenarios under deterministic methods, the risk obtained in the proposed system is higher. This research illustrated that ignoring of uncertainties in evaluation process might underestimate the risk level.展开更多
A multi-objective intelligent coordinating optimization strategy based on qualitative and quantitative synthetic model for Pb-Zn sintering blending process was proposed to obtain optimal mixture ratio. The mechanism a...A multi-objective intelligent coordinating optimization strategy based on qualitative and quantitative synthetic model for Pb-Zn sintering blending process was proposed to obtain optimal mixture ratio. The mechanism and neural network quantitative models for predicting compositions and rule models for expert reasoning were constructed based on statistical data and empirical knowledge. An expert reasoning method based on these models were proposed to solve blending optimization problem, including multi-objective optimization for the first blending process and area optimization for the second blending process, and to determine optimal mixture ratio which will meet the requirement of intelligent coordination. The results show that the qualified rates of agglomerate Pb, Zn and S compositions are increased by 7.1%, 6.5% and 6.9%, respectively, and the fluctuation of sintering permeability is reduced by 7.0%, which effectively stabilizes the agglomerate compositions and the permeability.展开更多
Crowd behaviors analysis is the‘state of art’research topic in the field of computer vision which provides applications in video surveillance to crowd safety,event detection,security,etc.Literature presents some of ...Crowd behaviors analysis is the‘state of art’research topic in the field of computer vision which provides applications in video surveillance to crowd safety,event detection,security,etc.Literature presents some of the works related to crowd behavior detection and analysis.In crowd behavior detection,varying density of crowds and motion patterns appears to be complex occlusions for the researchers.This work presents a novel crowd behavior detection system to improve these restrictions.The proposed crowd behavior detection system is developed using hybrid tracking model and integrated features enabled neural network.The object movement and activity in the proposed crowded behavior detection system is assessed using proposed GSLM-based neural network.GSLM based neural network is developed by integrating the gravitational search algorithm with LM algorithm of the neural network to increase the learning process of the network.The performance of the proposed crowd behavior detection system is validated over five different videos and analyzed using accuracy.The experimentation results in the crowd behavior detection with a maximum accuracy of 93%which proves the efficacy of the proposed system in video surveillance with security concerns.展开更多
To provide a seepage-stress coupling constitutive model that can directly describe the seepage-stress coupling relationship, a series of one-dimensional seepage-stress coupling tests on two kinds of soft rock (argilla...To provide a seepage-stress coupling constitutive model that can directly describe the seepage-stress coupling relationship, a series of one-dimensional seepage-stress coupling tests on two kinds of soft rock (argillaceous siltstone and brown mudstone) were performed by using an MTS-815.02 tri-axial rock mechanics test system, with which the stress-strain curves according to the seepage variation were obtained. Based on the experimental results and by employing Hooke's law, the formulation of the coefficient of strain-dependent permeability was presented and introduced to establish a coupling model. In addition, the mathematical expression and the incremental formulation for coupling model were advanced, in which five parameters that can be respectively determined by using the experimental results were included. The calculated results show that the proposed coupling model is capable of simulating the stress-strain relationship with considering the seepage-stress coupling in the nonlinear elastic stage of two kinds of soft rock.展开更多
To increase the efficiency and reliability of the thermodynamics analysis of the hydraulic system, the method based on pseudo-bond graph is introduced. According to the working mechanism of hydraulic components, they ...To increase the efficiency and reliability of the thermodynamics analysis of the hydraulic system, the method based on pseudo-bond graph is introduced. According to the working mechanism of hydraulic components, they can be separated into two categories: capacitive components and resistive components. Then, the thermal-hydraulic pseudo-bond graphs of capacitive C element and resistance R element were developed, based on the conservation of mass and energy. Subsequently, the connection rule for the pseudo-bond graph elements and the method to construct the complete thermal-hydraulic system model were proposed. On the basis of heat transfer analysis of a typical hydraulic circuit containing a piston pump, the lumped parameter mathematical model of the system was given. The good agreement between the simulation results and experimental data demonstrates the validity of the modeling method.展开更多
The influence of temperature and mass fraction of Pluonic F127 on the rheological properties of polyvinyl butyric （PVB）/Pluronic F127/polyethylene glycol （PEG） 200 blend systems was investigated by a rotational rh...The influence of temperature and mass fraction of Pluonic F127 on the rheological properties of polyvinyl butyric （PVB）/Pluronic F127/polyethylene glycol （PEG） 200 blend systems was investigated by a rotational rheometer with parallel plates. The results show that the blend systems approach homogeneous state at 140, 150 and 160℃while the rheological properties of the blend systems significantly deviate from the homogeneous systems at 120℃. Shear thinning behavior is observed for all the blend systems at different temperatures and is enhanced by increasing Pluronic F127 content. The complex viscosity, storage modulus, loss modulus, zero-shear activation energy and flow recovery of the blend systems increase with the increase of Pluronic F127 content. There is a crossing point for the loss modulus and the storage modulus of each sample at high frequency, which is called specified frequency （SF）. The loss modulus is larger than the storage modulus when the frequency is less than the SF, and when frequency is more than SF, the loss modulus is smaller than the storage modulus.展开更多
A new solar coupling regeneration system is proposed in order to improve the reliability of solar desiccant regeneration system.The new system makes comprehensively use of the solar energy and can also be appropriate ...A new solar coupling regeneration system is proposed in order to improve the reliability of solar desiccant regeneration system.The new system makes comprehensively use of the solar energy and can also be appropriate for energy-storage in a night operation mode when the electric power supply is at its valley.Comparison of the performance of the new system,the solar thermal regeneration system and the solar electrodialysis regeneration system are made and the influential factors of the performance of the new system are investigated.The results reveal that the new system will be more energy efficient than the solar thermal regeneration system and the solar electrodialysis regeneration system.展开更多
文摘为了提升微结构注塑机的成型精度,提高合模系统的合模力稳定性和运动特性尤为重要。文章设计了由伺服电机驱动的1300 k N微结构注塑机的合模系统。在此基础上,建立了该系统的三维几何模型,并在Adams虚拟样机环境中对开合模过程进行了多体系统动力学及运动学仿真。仿真结果表明,在移模速度600 mm/s时,合模系统的开合模运动保持相对平稳。这对于保证制品质量和提高成型加工效率具有重要意义。此研究为提高微结构注塑机合模系统的设计精度和成型质量提供了理论依据。
文摘During the propagation of high-power lasers within internal channels,the laser beam heats the propagation medium,causing the thermal blooming effect that degrades the beam quality at the output.The intricate configuration of the optical path within the internal channel necessitates complex and time-consuming efforts to assess the impact of thermal blooming effect on the optical path.To meet the engineering need for rapid evaluation of thermal blooming effect in optical paths,this study proposed a rapid simulation method for the thermal blooming effect in internal optical paths based on the finite element method.This method discretized the fluid region into infinitesimal elements and employed finite element method for flow field analysis.A simplified analytical model of the flow field region in complex internal channels was established,and regions with similar thermal blooming effect were divided within this model.Based on the calculated optical path differences within these regions,numerical simulations of phase distortion caused by thermal blooming were conducted.The calculated result were compared with those obtained using the existing methods.The findings reveal that for complex optical paths,the discrepancy between the two approaches is less than 3.6%,with similar phase distortion patterns observed.For L-type units,this method and the existing methods identify the same primary factors influencing aberrations and exhibit consistent trends in their variation.This method was used to analyze the impact of thermal blooming effect in a straight channel under different gravity directions.The results show that phase distortion varies with changes in the direction of gravity,and the magnitude of the phase difference is strongly correlated with the component of gravity perpendicular to the optical axis.Compared to the existing methods,this approach offers greater flexibility,obviates the need for complex custom analysis programming.The analytical results of this method enable a rapid assessment of the thermal blooming effect in optical paths within the internal channel.This is especially useful during the engineering design.These results also provide crucial references for developing strategies to suppress thermal blooming effect.
基金supported by the Fundamental Research Funds for the Central Universities(WK2310000098).
文摘A 499.8 MHz SOLEIL-type superconducting cavity was simulated and designed for the first time in this paper.The higher-order mode(HOM)properties of the cavity were investigated.Two kinds of coaxial HOM couplers were designed.Using 4 L-type and 4 T-type HOM couplers,the longitudinal impedance and the transverse impedances were suppressed to below 3 kΩand 30 kΩ/m,respectivly.The HOM damping requirements of Hefei Advanced Light Facility(HALF)were satisfied.This paper conducted an in-depth study on the radio frequency(RF)design,multipacting optimization,and thermal analysis of these coaxial couplers.Simulation results indicated that under operating acceleration voltage,the optimized couplers does not exhibit multiplicating or thermal breakdown phenomena.The cavity has the potential to reach a higher acceleration gradient.
基金Projects(11302252,11202230)supported by the National Natural Science Foundation of China
文摘This work addresses the saturation influence of control voltage on the occurring of self-excited vibration of maglev vehicle-bridge interaction system, which greatly degrades the stability of the levitation control, decreases the ride comfort, and restricts the cost of the whole system. Firstly, the interaction model of vehicle-bridge system is developed. Based on the interaction model, the relationship between the control voltage and vibration frequency is solved. Then, the variation of the effective direct component and fundamental harmonic are discussed. Furthermore, from the perspective of energy transmission between the levitation system and bridge, the principle underlying the self-excited vibration is explored, and the influence on the stability is discussed. Finally, in terms of the variation of the characteristic roots, the influence is analyzed further and some conclusions are obtained. This study provides a theoretical guidance for mastering the self-excited vibration problems.
基金Projects(51039001,51009063) supported by the National Natural Science Foundation of ChinaProject(SX2010-026) supported by State Council Three Gorges Project Construction Committee Executive Office,China+1 种基金Project(2012BS046) supported by Henan University of Technology,ChinaProject(BYHGLC-2010-02) supported by the Guangzhou Water Authority,China
文摘An integrated evaluation system under randomness and fuzziness was developed in this work to systematically assess the risk of groundwater contamination in a little town, Central China. In this system, randomness of the parameters and the fuzziness of the risk were considered simultaneously, and the exceeding standard probability of contamination and human health risk due to the contamination were integrated. The contamination risk was defined as a combination of "vulnerability" and "hazard". To calculate the value of "vulnerability", pollutant concentration was simulated by MODFLOW with random input variables and a new modified health risk assessment(MRA) model was established to analyze the level of "hazard". The limit concentration based on environmental-guideline and health risk due to manganese were systematically examined to obtain the general risk levels through a fuzzy rule base. The "vulnerability" and "hazard" were divided into five categories of "high", "medium-high", "medium", "low-medium" and "low", respectively. Then, "vulnerability" and "hazard" were firstly combined by integrated evaluation. Compared with the other two scenarios under deterministic methods, the risk obtained in the proposed system is higher. This research illustrated that ignoring of uncertainties in evaluation process might underestimate the risk level.
基金Project(2002CB312203) supported by the National Key Fundamental Research and Development Programof China pro-ject(60574030) supported bythe National Natural Science Foundation of China project(06FD026) supported bythe Natural Science Foun-dation of Hunan Province , China
文摘A multi-objective intelligent coordinating optimization strategy based on qualitative and quantitative synthetic model for Pb-Zn sintering blending process was proposed to obtain optimal mixture ratio. The mechanism and neural network quantitative models for predicting compositions and rule models for expert reasoning were constructed based on statistical data and empirical knowledge. An expert reasoning method based on these models were proposed to solve blending optimization problem, including multi-objective optimization for the first blending process and area optimization for the second blending process, and to determine optimal mixture ratio which will meet the requirement of intelligent coordination. The results show that the qualified rates of agglomerate Pb, Zn and S compositions are increased by 7.1%, 6.5% and 6.9%, respectively, and the fluctuation of sintering permeability is reduced by 7.0%, which effectively stabilizes the agglomerate compositions and the permeability.
文摘Crowd behaviors analysis is the‘state of art’research topic in the field of computer vision which provides applications in video surveillance to crowd safety,event detection,security,etc.Literature presents some of the works related to crowd behavior detection and analysis.In crowd behavior detection,varying density of crowds and motion patterns appears to be complex occlusions for the researchers.This work presents a novel crowd behavior detection system to improve these restrictions.The proposed crowd behavior detection system is developed using hybrid tracking model and integrated features enabled neural network.The object movement and activity in the proposed crowded behavior detection system is assessed using proposed GSLM-based neural network.GSLM based neural network is developed by integrating the gravitational search algorithm with LM algorithm of the neural network to increase the learning process of the network.The performance of the proposed crowd behavior detection system is validated over five different videos and analyzed using accuracy.The experimentation results in the crowd behavior detection with a maximum accuracy of 93%which proves the efficacy of the proposed system in video surveillance with security concerns.
基金Projects(50378069, 50639090) supported by the National Natural Science Foundation of ChinaProject(50639090) supported by the Joint Fund of Yalong River Hydropower Development, China
文摘To provide a seepage-stress coupling constitutive model that can directly describe the seepage-stress coupling relationship, a series of one-dimensional seepage-stress coupling tests on two kinds of soft rock (argillaceous siltstone and brown mudstone) were performed by using an MTS-815.02 tri-axial rock mechanics test system, with which the stress-strain curves according to the seepage variation were obtained. Based on the experimental results and by employing Hooke's law, the formulation of the coefficient of strain-dependent permeability was presented and introduced to establish a coupling model. In addition, the mathematical expression and the incremental formulation for coupling model were advanced, in which five parameters that can be respectively determined by using the experimental results were included. The calculated results show that the proposed coupling model is capable of simulating the stress-strain relationship with considering the seepage-stress coupling in the nonlinear elastic stage of two kinds of soft rock.
基金Project(51175518)supported by the National Natural Science Foundation of China
文摘To increase the efficiency and reliability of the thermodynamics analysis of the hydraulic system, the method based on pseudo-bond graph is introduced. According to the working mechanism of hydraulic components, they can be separated into two categories: capacitive components and resistive components. Then, the thermal-hydraulic pseudo-bond graphs of capacitive C element and resistance R element were developed, based on the conservation of mass and energy. Subsequently, the connection rule for the pseudo-bond graph elements and the method to construct the complete thermal-hydraulic system model were proposed. On the basis of heat transfer analysis of a typical hydraulic circuit containing a piston pump, the lumped parameter mathematical model of the system was given. The good agreement between the simulation results and experimental data demonstrates the validity of the modeling method.
基金Project(20776161) supported by the National Natural Science Foundation of China
文摘The influence of temperature and mass fraction of Pluonic F127 on the rheological properties of polyvinyl butyric （PVB）/Pluronic F127/polyethylene glycol （PEG） 200 blend systems was investigated by a rotational rheometer with parallel plates. The results show that the blend systems approach homogeneous state at 140, 150 and 160℃while the rheological properties of the blend systems significantly deviate from the homogeneous systems at 120℃. Shear thinning behavior is observed for all the blend systems at different temperatures and is enhanced by increasing Pluronic F127 content. The complex viscosity, storage modulus, loss modulus, zero-shear activation energy and flow recovery of the blend systems increase with the increase of Pluronic F127 content. There is a crossing point for the loss modulus and the storage modulus of each sample at high frequency, which is called specified frequency （SF）. The loss modulus is larger than the storage modulus when the frequency is less than the SF, and when frequency is more than SF, the loss modulus is smaller than the storage modulus.
基金Project(51036001)supported by the National Natural Science Foundation of ChinaProject(2011BAJ03B05)supported by the National Science and Technology Pillar Program during the 12th Five-Year Plan Period of China
文摘A new solar coupling regeneration system is proposed in order to improve the reliability of solar desiccant regeneration system.The new system makes comprehensively use of the solar energy and can also be appropriate for energy-storage in a night operation mode when the electric power supply is at its valley.Comparison of the performance of the new system,the solar thermal regeneration system and the solar electrodialysis regeneration system are made and the influential factors of the performance of the new system are investigated.The results reveal that the new system will be more energy efficient than the solar thermal regeneration system and the solar electrodialysis regeneration system.
