期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
变模量弹塑性强度折减法在乐昌峡古滑坡体稳定分析中的应用 被引量:4
1
作者 靳晓兵 杨光华 +3 位作者 张玉成 钟志辉 李德吉 史永胜 《广东水利水电》 2012年第1期37-42,共6页
随着我国大规模的资源和能源开发以及基础设施建设,工程边坡的数量越来越多,边坡高度越来越高,滑坡灾害不仅时有发生,而且也越来越受人们的关注。目前用于边坡稳定性分析的数值方法中的强度折减法通常是仅对强度参数进行折减,且采用的... 随着我国大规模的资源和能源开发以及基础设施建设,工程边坡的数量越来越多,边坡高度越来越高,滑坡灾害不仅时有发生,而且也越来越受人们的关注。目前用于边坡稳定性分析的数值方法中的强度折减法通常是仅对强度参数进行折减,且采用的是理想弹塑性模型,由于其在弹性阶段是按线弹性且对弹性模量不折减,故未能充分考虑屈服前岩土体的非线性,采用这种理想弹塑性模型的强度折减法其计算所得到的变形偏小。该文利用变模量强度折减法和局部强度折减法分析了乐昌峡鹅公带古滑坡体的稳定性,以及库水位变化对鹅公带滑坡体稳定性影响的分析,及其鹅公带反压加固后稳定性的分析,分析方法可以为类似工程提供借鉴。 展开更多
关键词 边坡 变模量弹塑性强度折减法 局部强度折减法 古滑坡体
在线阅读 下载PDF
利用变模量强度折减法计算结果确定土质边坡临界滑动面的方法 被引量:6
2
作者 张玉成 杨光华 +2 位作者 胡海英 刘鹏 钟志辉 《岩土工程学报》 EI CAS CSCD 北大核心 2013年第S1期14-22,共9页
现有强度折减法用于边坡分析时,通常仅折减强度参数,不折减变形参数,采用的是理想弹塑性模型,其计算的安全系数与传统的极限平衡方法基本一致,获得的主要是边坡的安全系数,但其计算时未能真实考虑土体的非线性,很难得出接近实际的变形... 现有强度折减法用于边坡分析时,通常仅折减强度参数,不折减变形参数,采用的是理想弹塑性模型,其计算的安全系数与传统的极限平衡方法基本一致,获得的主要是边坡的安全系数,但其计算时未能真实考虑土体的非线性,很难得出接近实际的变形场。基于变模量弹塑性强度折减法可获得更符合实际的变形场,针对目前滑动面搜索方法存在的不足,在分析边坡的变形场和应力特点,滑动面的形成机理及其特征的基础上,研究了如何直接通过边坡变形场和应力场确定滑动面,探讨了3种确定滑动面的方法,一种是用位移梯度来确定最不利滑动面的方法;第二种是利用Flac计算方法的特点,利用非滑动区的节点速度趋于零,而滑动区节点速度非常大的特性确定滑动面;最后一种是利用边坡监测中的"测斜管"思想,用跟踪数值分析中节点位移,用发生位移突变的点作为滑动面上的点,拟合各点所得的曲线即为临界滑动面。文章对含软弱夹层黏土边坡的滑动面进行了分析,3种方法得到的滑动面位置比较一致,与传统极限平衡法相比,3种方法不仅可以应用于均质边坡,而且可以用来确定非均质边坡的滑动面。 展开更多
关键词 变模量弹塑性 强度折减法 边坡 形场和应力场 临界滑动面
在线阅读 下载PDF
Sensitivity analysis of influencing parameters in cavern stability 被引量:9
3
作者 Abolfazl Abdollahipour Reza Rahmannejad 《International Journal of Mining Science and Technology》 SCIE EI 2012年第5期707-710,共4页
In order to analyze the stability of the underground rock structures,knowing the sensitivity of geomechanical parameters is important.To investigate the priority of these geomechanical properties in the stability of c... In order to analyze the stability of the underground rock structures,knowing the sensitivity of geomechanical parameters is important.To investigate the priority of these geomechanical properties in the stability of cavern,a sensitivity analysis has been performed on a single cavern in various rock mass qualities according to RMR using Phase 2.The stability of cavern has been studied by investigating the side wall deformation.Results showed that most sensitive properties are coefficient of lateral stress and modulus of deformation.Also parameters of Hoek-Brown criterion and r c have no sensitivity when cavern is in a perfect elastic state.But in an elasto-plastic state,parameters of Hoek-Brown criterion and r c affect the deformability;such effect becomes more remarkable with increasing plastic area.Other parameters have different sensitivities concerning rock mass quality(RMR).Results have been used to propose the best set of parameters for study on prediction of sidewall displacement. 展开更多
关键词 Sensitivity analysis Cavern stability Numerical methods RMR rating system
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部