期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
多轴应力下塑性混凝土峰值后变形特征 被引量:9
1
作者 王四巍 王忠福 +1 位作者 潘旭威 高丹盈 《建筑材料学报》 EI CAS CSCD 北大核心 2014年第4期654-658,共5页
通过单轴压缩试验以及侧压恒定和侧向位移恒定的2类真三轴压缩试验,研究了塑性混凝土峰值后变形特征.结果表明:塑性混凝土峰值后变形特征与试验的侧限条件密切相关.塑性混凝土在单轴受压情况下,峰值后变形呈现软化特征;在侧压恒定的真... 通过单轴压缩试验以及侧压恒定和侧向位移恒定的2类真三轴压缩试验,研究了塑性混凝土峰值后变形特征.结果表明:塑性混凝土峰值后变形特征与试验的侧限条件密切相关.塑性混凝土在单轴受压情况下,峰值后变形呈现软化特征;在侧压恒定的真三轴压缩试验下,峰值后变形呈现理想塑化或近似塑化特征,试件的破坏主要表现为双向剪切破坏,且破坏方向与最小主应力方向一致;在侧向位移恒定的真三轴压缩试验下,峰值后变形呈现硬化特征,试件的破坏主要表现为轴向过大的压缩变形.当变形参数D2>0时,峰值后变形表现为硬化;当-0.1≤D2<0时,峰值后变形表现为理想塑化或近似塑化;当D2<-0.1时,峰值后变形表现为软化. 展开更多
关键词 塑性混凝土 峰值变形 多轴应力 变形参数
在线阅读 下载PDF
工作面推进速度对地表沉陷动态变形影响研究 被引量:14
2
作者 贾新果 宋桂军 陈凯 《煤炭科学技术》 CAS CSCD 北大核心 2019年第7期208-214,共7页
为了解决地表建构筑物受动态沉陷变形影响的保护问题,揭示地表沉陷移动过程中地表动态变形规律,整理统计了东胜矿区10余个地表岩移观测站实测数据,在此基础上建立了考虑工作面不同推进速度(2.5~20.0 m/d)的6个数值分析模型,分析总结了... 为了解决地表建构筑物受动态沉陷变形影响的保护问题,揭示地表沉陷移动过程中地表动态变形规律,整理统计了东胜矿区10余个地表岩移观测站实测数据,在此基础上建立了考虑工作面不同推进速度(2.5~20.0 m/d)的6个数值分析模型,分析总结了地表动态移动变形特征和规律。研究结果表明:地表移动时间、地表移动活跃期与工作面采深、推进速度之比存在线性关系;地表最大下沉速度与工作面推进速度和最大下沉量乘积的平方成正比,与采深的平方成反比;地表动态变形峰值与地表最终最大变形值的比值和工作面推进速度与主要影响半径的比值符合指数函数的关系;通过受护建构筑物地表临界变形值和地表变形参数建立了工作面安全推进速度计算模型,该计算模型可计算工作面最小推进速度。并以高压线塔下压煤安全开采为例,给出了工作面安全推进速度,实例验证了作者建立的工作面安全推进速度计算模型是有效的,为地表建构筑物的有效保护提供了技术依据。 展开更多
关键词 推进速度 动态沉陷 变形峰值 采动保护
在线阅读 下载PDF
00Cr22Ni5Mo3N双相不锈钢的高温软化机理 被引量:1
3
作者 赵科巍 马勤 +1 位作者 张红霞 王佳 《有色金属》 CAS CSCD 北大核心 2011年第2期68-71,共4页
采用热/力模拟实验方法对热轧态00Cr22Ni5Mo3N双相不锈钢(DSS)进行低应变高温平面变形试验。结果表明,在应变速率分别为0.1s-1和2s-1,变形温度900~1200℃条件下,双相不锈钢的峰值变形抗力随变形温度升高而降低,随应变速率的增大而增加... 采用热/力模拟实验方法对热轧态00Cr22Ni5Mo3N双相不锈钢(DSS)进行低应变高温平面变形试验。结果表明,在应变速率分别为0.1s-1和2s-1,变形温度900~1200℃条件下,双相不锈钢的峰值变形抗力随变形温度升高而降低,随应变速率的增大而增加,在各变形温度下,其差值达到30~80MPa。在1000~1200℃变形温度区间,铁素体组织发生完全的动态回复以及再结晶软化,部分奥氏体主要通过孪生变形及亚晶的形成进行软化。 展开更多
关键词 金属材料 00Cr22Ni5Mo3N双相不锈钢 峰值变形抗力 动态回复及再结晶 孪生变形
在线阅读 下载PDF
Humidification vibration deformation behavior of intact loess 被引量:1
4
作者 CHENG Da-wei LUO Ya-sheng +2 位作者 WU Cai-ping CHEN Xi GUO Hong 《Journal of Central South University》 SCIE EI CAS 2013年第7期1985-1991,共7页
A parameter, known as the parameter of humidification vibration deformation, was proposed, describing quantitatively the impact of water content on vibration settlement deformation, and its relationship with humidific... A parameter, known as the parameter of humidification vibration deformation, was proposed, describing quantitatively the impact of water content on vibration settlement deformation, and its relationship with humidification water content, dynamic shear stress peak value, initial consolidation stress and vibration frequency was built. The result shows that 1) the parameter of humidification vibration deformation increases with the vibration shear stress peak value increasing. 2) The humidification water content has significant influence on the curve of the parameter of humidification vibration deformation and the peak vibration shear stress. When the humidification water content is low, the curve increases slowly. However, when the humidification water content is high, the curve increases rapidly. 3) Initial consolidation stress has significant influence on the humidification vibration deformation coefficient. When initial consolidation stress is not large enough to destroy the loess structure, with initial consolidation stress increasing, the humidification vibration deformation coefficient decreases. On the contrary, the humidification vibration deformation coefficient increases with initial consolidation stress increasing. 4) With the increase of vibration time, the parameter of humidification vibration settlement shows an increasing trend overall. The initial dynamic shear stress peak value and humidification water content all have significant effects on the curve of the parameter of humidification vibration settlement and vibration time. However, the humidification water content is even more significant. 展开更多
关键词 intact loess vibration deformation humidification vibration deformation coefficient
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部