Effect of quenching process on the microstrucmre and mechanical properties of a kind of seamless tubes of steel 28CrMnMoV was investigated. Then, an investigation on the influence of two different quenching processes ...Effect of quenching process on the microstrucmre and mechanical properties of a kind of seamless tubes of steel 28CrMnMoV was investigated. Then, an investigation on the influence of two different quenching processes on the ductile-brittle transition behavior of this steel was undertaken. The ductile-brittle transition temperatures of the steel by two different quenching processes were also determined. The results show that a good combination of mechanical properties can be obtained through austenitizing experimental steel at 800 ℃ or 890 ℃ followed by tempering at 630 ℃. Ductile-to-brittle transition temperature of 28CrMnMoV steel austenitized at 800 ℃ followed by tempering at 640 ℃ is about -73 ℃, which is much lower than the value -37 ℃ when the steel was austenitized at 890℃ and then tempered at 650 ℃. This indicates that subcritical quenching process could decrease largely the ductile-to-brittle transition temperature of 28CrMnMoV steel.展开更多
The hot working mechanism of 2Cr11 MolVNbN steel was investigated by means of compression tests at temperatures of900-1150 ℃ and strain rates of 0.005-5 s^(-1).At strains of 0.2,0.3,0.5 and 0.7,the relationship among...The hot working mechanism of 2Cr11 MolVNbN steel was investigated by means of compression tests at temperatures of900-1150 ℃ and strain rates of 0.005-5 s^(-1).At strains of 0.2,0.3,0.5 and 0.7,the relationship among strain rate sensitivity,power dissipation efficiency and instability parameter under different conditions were studied.Power dissipation maps and instability maps at different strains were established.The optimal and the instable deformation regimes were established by the processing maps based on the dynamic material model.The processing maps were developed for the typical strains of 0.2,0.3,0.5 and 0.7,predicting the instability regions occurring at high strain rate more than 0.05 s^(-1),which should be avoided during hot deformation.The optimized processing parameters for hot working of 2CrllMolVNbN supercritical stainless steel were temperatures of 1080-1120 ℃ and strain rates of 0.005-0.01 s^(-1).展开更多
基金Project(2008FJ1003)supported by the Hunan Province Science and Technology,China
文摘Effect of quenching process on the microstrucmre and mechanical properties of a kind of seamless tubes of steel 28CrMnMoV was investigated. Then, an investigation on the influence of two different quenching processes on the ductile-brittle transition behavior of this steel was undertaken. The ductile-brittle transition temperatures of the steel by two different quenching processes were also determined. The results show that a good combination of mechanical properties can be obtained through austenitizing experimental steel at 800 ℃ or 890 ℃ followed by tempering at 630 ℃. Ductile-to-brittle transition temperature of 28CrMnMoV steel austenitized at 800 ℃ followed by tempering at 640 ℃ is about -73 ℃, which is much lower than the value -37 ℃ when the steel was austenitized at 890℃ and then tempered at 650 ℃. This indicates that subcritical quenching process could decrease largely the ductile-to-brittle transition temperature of 28CrMnMoV steel.
基金Project(CDJZR14130006)supported by the Fundamental Research Funds for the Central Universities,China
文摘The hot working mechanism of 2Cr11 MolVNbN steel was investigated by means of compression tests at temperatures of900-1150 ℃ and strain rates of 0.005-5 s^(-1).At strains of 0.2,0.3,0.5 and 0.7,the relationship among strain rate sensitivity,power dissipation efficiency and instability parameter under different conditions were studied.Power dissipation maps and instability maps at different strains were established.The optimal and the instable deformation regimes were established by the processing maps based on the dynamic material model.The processing maps were developed for the typical strains of 0.2,0.3,0.5 and 0.7,predicting the instability regions occurring at high strain rate more than 0.05 s^(-1),which should be avoided during hot deformation.The optimized processing parameters for hot working of 2CrllMolVNbN supercritical stainless steel were temperatures of 1080-1120 ℃ and strain rates of 0.005-0.01 s^(-1).
