Combustion chamber components （cylinder head, cylinder liner, piston assembly and oil film） are treated as a coupled body. Based on the three-dimensional numerical simulation of heat transfer of the coupled body, a ...Combustion chamber components （cylinder head, cylinder liner, piston assembly and oil film） are treated as a coupled body. Based on the three-dimensional numerical simulation of heat transfer of the coupled body, a coupled three-dimensional calculation model for the in-cylinder working process and the combustion chamber components was built with domain decomposition and boundary coupling method, in which the coupled three-dimensional simulation of in-cylindcr working process and the combustion chamber components was adopted. The simulation was applied in the influence investigation of the space non-uniformity in heat transfer among combustion chamber components on the generation of in-cylinder emissions. The results show that the space non-uniformity in heat transfer among the combustion chamber components has great influence on the generation of in-cylinder NOx emissions. The heat transfer space non-uniformity of combustion chamber components has little effect on soot formation, and far less effect on soot formation than on NOx. Under two situations of different wall temperature distributions, the soot in cylinder is different by 1.3% when exhaust valves are open.展开更多
This paper examines the effect of equalizing ignition delay in a compression ignition engine.Two sets of tests were conducted,i.e.a set of constant injection timing tests with start of fuel injection at 10°crank ...This paper examines the effect of equalizing ignition delay in a compression ignition engine.Two sets of tests were conducted,i.e.a set of constant injection timing tests with start of fuel injection at 10°crank angle degree(CAD)before top dead center(BTDC)and a set of constant ignition timing tests while also keeping the 10℃AD BTDC injection and adding ignition improver(2-ethylhexylnitrate-,2-EHN)to the fuel mixtures.Soot particles were characterized using DMS-500 instrument in terms of mass,size,and number.The experimental results showed that adding 2-EHN to the model fuel blends reduced the soot surface area,soot mass concentration and soot mean size.Replacing 20 vol%of a C 7-heptane with 20 vol%methyl-decanoate(an oxygenated C 11 molecule)did not affect the ignition delay or rate of fuel air premixing,the peak in-cylinder pressure or heat release rates.Toluene addition(0−22.5 vol%)to heptane increased the mean size of the soot particles generated by only 3%while also resulted in a slight increase in the peak cylinder pressure and peak heat release rates.Blending toluene and methyl-decanoate into heptane without adding 2-EHN increased the premix phase fraction by at least 13%.However,by adding 2-EHN(4×10^(−4)−1.5×10^(−3)),the premixed phase fraction decreased by at least 11%.展开更多
In order to solve the failure of fuel system when using petroleum coke oil slurry (PCOS) in a R180 diesel engine directly,a petroleum coke oil slurry fuel system (PCOSFS) was developed and installed in R180 engine,whi...In order to solve the failure of fuel system when using petroleum coke oil slurry (PCOS) in a R180 diesel engine directly,a petroleum coke oil slurry fuel system (PCOSFS) was developed and installed in R180 engine,which was called PCOS engine.In order to analyze performances and emissions of the PCOS engine,a comparative experiment between PCOS engine fueled with PCOS and R180 engine fueled with diesel oil was carried out.The results show that the PCOS engine can run smoothly,the maximum output power decreases by about 6.2% and 19.0% and the maximum brake thermal efficiency reduces by around 5.85% and 4.13% as compared to R180 engine under the conditions of 1 200 and 1 600 r/min.The HC emissions of PCOS engine are lower than those of R180 engine at 1 200 r/min,and are close to those of R180 engine at 1 600 r/min.The CO emissions are similar to R180 engine at 1 200 and 1 600 r/min.The smoke intensity is close to R180 engine at 1 200 r/min,and is higher than R180 engine at 1 600 r/min.The particles emitted from PCOS engine array sparsely,but particles emitted from R180 engine array closely,cohering together.展开更多
Achieving simultaneous reduction of NOx,CO and unburned hydrocarbon(UHC) emissions without compromising engine performance at part loads is the current focus of dual fuel engine research.The present work focuses on an...Achieving simultaneous reduction of NOx,CO and unburned hydrocarbon(UHC) emissions without compromising engine performance at part loads is the current focus of dual fuel engine research.The present work focuses on an experimental investigation conducted on a dual fuel(diesel-natural gas) engine to examine the simultaneous effect of inlet air pre-heating and exhaust gas recirculation(EGR) ratio on performance and emission characteristics at part loads.The use of EGR at high levels seems to be unable to improve the engine performance at part loads.However,it is shown that EGR combined with pre-heating of inlet air can slightly increase thermal efficiency,resulting in reduced levels of both unburned hydrocarbon and NOx emissions.CO and UHC emissions are reduced by 24% and 31%,respectively,The NOx emissions decrease by 21% because of the lower combustion temperature due to the much inert gas brought by EGR and decreased oxygen concentration in the cylinder.展开更多
The art of cricket bowling is complex and arduous owing to the run-up and ball release time energy requirement to achieve speed and variations. Therefore, human bowlers cannot bowl for extended periods and numerous me...The art of cricket bowling is complex and arduous owing to the run-up and ball release time energy requirement to achieve speed and variations. Therefore, human bowlers cannot bowl for extended periods and numerous mechanical bowling machines have been built to help batsmen improve their skills during practice sessions. However, most of these existing machines are designed for spherical balls ignoring the distinguishing physical feature of a cricket ball: the raised equatorial seam, which makes it less of a sphere. The bowlers are known to often benefit from this seam in their pursuit to taking the batsmen's wicket by imparting swing, spin and bounce variations along-with other bowling variables. This lack of the seam consideration creates a void between human and mechanical bowling. In this work, we present design and development of an automatic bowling machine termed as ROBOWLER to make mechanical bowling more realistic. This machine ensures ball seam position as well as fulfills other constraints. Ball pitching and seam position accuracy results underscore the suitability of this design to enhance the capabilities of mechanical bowling.展开更多
基金Projects(50576008,50876016,51006015) supported by the National Natural Science Foundation of ChinaProject(20062180) supported by the Natural Science Foundation of Liaoning Province, ChinaProject(20100470070) supported by China Postdoctoral Science Foundation
文摘Combustion chamber components （cylinder head, cylinder liner, piston assembly and oil film） are treated as a coupled body. Based on the three-dimensional numerical simulation of heat transfer of the coupled body, a coupled three-dimensional calculation model for the in-cylinder working process and the combustion chamber components was built with domain decomposition and boundary coupling method, in which the coupled three-dimensional simulation of in-cylindcr working process and the combustion chamber components was adopted. The simulation was applied in the influence investigation of the space non-uniformity in heat transfer among combustion chamber components on the generation of in-cylinder emissions. The results show that the space non-uniformity in heat transfer among the combustion chamber components has great influence on the generation of in-cylinder NOx emissions. The heat transfer space non-uniformity of combustion chamber components has little effect on soot formation, and far less effect on soot formation than on NOx. Under two situations of different wall temperature distributions, the soot in cylinder is different by 1.3% when exhaust valves are open.
文摘This paper examines the effect of equalizing ignition delay in a compression ignition engine.Two sets of tests were conducted,i.e.a set of constant injection timing tests with start of fuel injection at 10°crank angle degree(CAD)before top dead center(BTDC)and a set of constant ignition timing tests while also keeping the 10℃AD BTDC injection and adding ignition improver(2-ethylhexylnitrate-,2-EHN)to the fuel mixtures.Soot particles were characterized using DMS-500 instrument in terms of mass,size,and number.The experimental results showed that adding 2-EHN to the model fuel blends reduced the soot surface area,soot mass concentration and soot mean size.Replacing 20 vol%of a C 7-heptane with 20 vol%methyl-decanoate(an oxygenated C 11 molecule)did not affect the ignition delay or rate of fuel air premixing,the peak in-cylinder pressure or heat release rates.Toluene addition(0−22.5 vol%)to heptane increased the mean size of the soot particles generated by only 3%while also resulted in a slight increase in the peak cylinder pressure and peak heat release rates.Blending toluene and methyl-decanoate into heptane without adding 2-EHN increased the premix phase fraction by at least 13%.However,by adding 2-EHN(4×10^(−4)−1.5×10^(−3)),the premixed phase fraction decreased by at least 11%.
基金Project(2007BAA09B05)supported by the National Key Technology Research and Development Program of ChinaProject(50804004)supported by the National Natural Science Foundation of China
文摘In order to solve the failure of fuel system when using petroleum coke oil slurry (PCOS) in a R180 diesel engine directly,a petroleum coke oil slurry fuel system (PCOSFS) was developed and installed in R180 engine,which was called PCOS engine.In order to analyze performances and emissions of the PCOS engine,a comparative experiment between PCOS engine fueled with PCOS and R180 engine fueled with diesel oil was carried out.The results show that the PCOS engine can run smoothly,the maximum output power decreases by about 6.2% and 19.0% and the maximum brake thermal efficiency reduces by around 5.85% and 4.13% as compared to R180 engine under the conditions of 1 200 and 1 600 r/min.The HC emissions of PCOS engine are lower than those of R180 engine at 1 200 r/min,and are close to those of R180 engine at 1 600 r/min.The CO emissions are similar to R180 engine at 1 200 and 1 600 r/min.The smoke intensity is close to R180 engine at 1 200 r/min,and is higher than R180 engine at 1 600 r/min.The particles emitted from PCOS engine array sparsely,but particles emitted from R180 engine array closely,cohering together.
文摘Achieving simultaneous reduction of NOx,CO and unburned hydrocarbon(UHC) emissions without compromising engine performance at part loads is the current focus of dual fuel engine research.The present work focuses on an experimental investigation conducted on a dual fuel(diesel-natural gas) engine to examine the simultaneous effect of inlet air pre-heating and exhaust gas recirculation(EGR) ratio on performance and emission characteristics at part loads.The use of EGR at high levels seems to be unable to improve the engine performance at part loads.However,it is shown that EGR combined with pre-heating of inlet air can slightly increase thermal efficiency,resulting in reduced levels of both unburned hydrocarbon and NOx emissions.CO and UHC emissions are reduced by 24% and 31%,respectively,The NOx emissions decrease by 21% because of the lower combustion temperature due to the much inert gas brought by EGR and decreased oxygen concentration in the cylinder.
文摘The art of cricket bowling is complex and arduous owing to the run-up and ball release time energy requirement to achieve speed and variations. Therefore, human bowlers cannot bowl for extended periods and numerous mechanical bowling machines have been built to help batsmen improve their skills during practice sessions. However, most of these existing machines are designed for spherical balls ignoring the distinguishing physical feature of a cricket ball: the raised equatorial seam, which makes it less of a sphere. The bowlers are known to often benefit from this seam in their pursuit to taking the batsmen's wicket by imparting swing, spin and bounce variations along-with other bowling variables. This lack of the seam consideration creates a void between human and mechanical bowling. In this work, we present design and development of an automatic bowling machine termed as ROBOWLER to make mechanical bowling more realistic. This machine ensures ball seam position as well as fulfills other constraints. Ball pitching and seam position accuracy results underscore the suitability of this design to enhance the capabilities of mechanical bowling.
