期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
One-pot alternating current synthesis of SnO_(2) based composite with enhanced diffusion kinetic behaviors for lithium-ion batteries
1
作者 ZHANG Guo-qiang JING Ming-jun +10 位作者 HE Li LI Dan WU Yu-feng YI Ming-guang LIU Cheng WANG Xing-yu HU Hong-hui WU Meng WU Tian-jing HUANG Yu-jie HOU Hong-shuai 《Journal of Central South University》 CSCD 2024年第12期4424-4436,共13页
SnO_(2)is used as electrode material with excellent properties,but it has some disadvantages such as slow reaction kinetics,low inherent conductivity and complex preparation process.Here,SnO_(2)@carbon nanotubes(SnO_(... SnO_(2)is used as electrode material with excellent properties,but it has some disadvantages such as slow reaction kinetics,low inherent conductivity and complex preparation process.Here,SnO_(2)@carbon nanotubes(SnO_(2)@CNTs)is synthesized through an efficient method of one-pot alternating current electrochemical dispersion.By using heat treatment at 400℃,the SnO_(2)@CNTs-400 composite material with abundant mesoporous structure is obtained,while the crystal particles are grown,and a strong bonding effect is formed with CNTs via powerful Sn-O-C bond.Benefiting from the introduction of high electrical conductivity CNTs and outstanding structural characteristics,as prepared composite material(SnO_(2)@CNTs-400)exhibit enhanced diffusion dynamics,lithium-ion transmission rate and structural steadiness.The specific capacity of SnO_(2)@CNTs and SnO_(2)@CNTs-400 as anodes for lithium-ion batteries can reach 690.2 mA·h/g and 836.5 mA·h/g,respectively,after 100 cycles at 0.5 A/g.The abundant chemical bonds and porous structure can be formed in composite via alternating current synthesis method,which takes significant in improving electrochemical properties. 展开更多
关键词 alternating current mesoporous structure bonding unit electrochemical behavior
在线阅读 下载PDF
表面无损等离子体处理聚丙烯粘结强度产生机理分析 被引量:1
2
作者 李国明 唐颂超 +2 位作者 左立增 孙刚 陈延安 《工程塑料应用》 CAS CSCD 北大核心 2022年第1期116-121,共6页
以空气为等离子体反应气体对聚丙烯(PP)样板表面进行常压低温等离子体处理,分别采用光学显微镜、电晕笔、傅里叶变换红外光谱分析表征了处理后PP样板的表面形貌、表面润湿张力以及表面基团类型。将处理后PP样板与聚氨酯粘合剂以及聚氯乙... 以空气为等离子体反应气体对聚丙烯(PP)样板表面进行常压低温等离子体处理,分别采用光学显微镜、电晕笔、傅里叶变换红外光谱分析表征了处理后PP样板的表面形貌、表面润湿张力以及表面基团类型。将处理后PP样板与聚氨酯粘合剂以及聚氯乙烯(PVC)皮革复合制得PP/PVC复合板,测试了三者之间的粘结强度,并对粘结强度产生的机理进行了分析。研究表明,通过调整等离子体处理工艺,可以获得表面形貌无损的PP样板;表面无损PP样板的表面润湿张力相较于未处理样板仅由28 mN/m提高至31 mN/m,但粘结强度由40 N/m提升至809 N/m;表面无损PP样板表面的酰胺基团与粘合剂中的异氰酸根之间的化学键作用是粘结强度产生的根本原因;增加表面无损PP样板可与粘合剂反应的表面基团含量,能有效提升表面无损PP材料与粘合剂之间的粘结强度。 展开更多
关键词 表面无损 常压低温等离子体 聚丙烯 润湿张力 化学键作用 粘结强度
在线阅读 下载PDF
一个值得商榷的说法
3
作者 卜柃科 《化学教学》 CAS 北大核心 1999年第9期47-48,共2页
关键词 化学 值得商榷 元素化学 基本性质 研究元素 原子半径 几何构型 原因分析 第一电离能 化学键作用
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部