The nanogrooved surface of polystyrene(PS) petri-dishes was induced by an ultraviolet laser irradiation method. The influence of the surface nanostructure on the growth of the human tongue squamous cells carcinomas (H...The nanogrooved surface of polystyrene(PS) petri-dishes was induced by an ultraviolet laser irradiation method. The influence of the surface nanostructure on the growth of the human tongue squamous cells carcinomas (HTSCC) was investigated. Cells cultured on laser-irradiated PS surface show an enhanced attachment and spreading in HTSCC cell culture test, and cell orientation was successfully controlled by selectively treating the PS surface. We also prove that the nanostructures on polymer surface improved the cell attachment and spreading.展开更多
TN305.2 2003043103聚二甲基硅氧烷微流控芯片的紫外光照射表面处理研究=Surface modification of poly(dimethylsiloxane)-fabricatedmicrofluidic chip by UV radiation[刊,中]/孟斐(浙江大学化学系微分析系统研究所.浙江,杭州(310028...TN305.2 2003043103聚二甲基硅氧烷微流控芯片的紫外光照射表面处理研究=Surface modification of poly(dimethylsiloxane)-fabricatedmicrofluidic chip by UV radiation[刊,中]/孟斐(浙江大学化学系微分析系统研究所.浙江,杭州(310028)),陈恒武…∥高等学校化学学报.-2002,23(7).-1264-1268研究了紫外光化学表面改性对聚二甲基硅氧烷(PDMS)微流控芯片的片基间粘接力及毛细管通道电渗流性能的影响。PDMS片基经紫外光射照后,粘接力增强,可实现PDMS芯片的永久性封合,同时亲水性得到改善,通道中的电渗流增大。与文献报道的等离子体表面处理方法比较,采用紫外光表面处理,设备简单,操作方便,耗费少,是一种简单易行的聚二甲基硅氧烷芯片表面处理方法。图7表1参10(张志升)展开更多
Wetting condition of micro/nanostructured surface has received tremendous attention due to the potential applications in commercial,industrial,and military areas.Surfaces with extreme wetting properties,e.g.,superhydr...Wetting condition of micro/nanostructured surface has received tremendous attention due to the potential applications in commercial,industrial,and military areas.Surfaces with extreme wetting properties,e.g.,superhydrophobic or superhydrophilic,are extensively employed due to their superior anti-icing,drag reduction,enhanced boiling heat transfer,self-cleaning,and anti-bacterial properties depending on solid-liquid interfacial interactions.Laser-based techniques have gained popularity in recent years to create micro/nano-structured surface owing to their high flexibility,system precision,and ease for automation.These techniques create laser induced periodic surface structures(LIPSS)or hierarchical structures on substrate material.However,micro/nanostructures alone cannot attain the desired wettability.Subsequent modification of surface chemistry is essentially needed to achieve target extreme wettability.This review paper aims to provide a comprehensive review for both laser texturing techniques and the following chemistry modification methods.Recent research progress and fundamental mechanisms of surface structure generation via different types of lasers and various chemistry modification methods are discussed.The complex combination between the laser texturing and surface chemistry modification methods to decide the final wetting condition is presented.More importantly,surface functionalities of these surfaces with extreme wetting properties are discussed.Lastly,prospects for future research are proposed and discussed.展开更多
The effects of SiCp surface modifications(Cu coating,Ni coating and Ni/Cu coating)on the microstructures and mechanical properties of Al matrix composites were investigated.Surface modification of SiC particles with C...The effects of SiCp surface modifications(Cu coating,Ni coating and Ni/Cu coating)on the microstructures and mechanical properties of Al matrix composites were investigated.Surface modification of SiC particles with Cu,Ni and Cu/Ni,respectively,was carried out by electroless plating method.SiCp/Al composites were prepared by hot pressed sintering followed by hot extrusion.The results show that the surface modification of SiC particles plays an effective role,which is relative to the type of surface coating,and the interfacial bonding become stronger in the following order:untreated SiCp<Ni(Cu)-coated SiCp<Ni/Cu-coated SiCp.The Ni/Cu-coated SiCp/Al composites exhibit the best comprehensive mechanical properties,with ultimate tensile strength(σUTS)and fracture strain(εf)of 389 MPa and 6.3%,respectively.Compared with that of untreated-SiCp/Al composites,theσUTS andεf are enhanced by 19.3%and 57.5%.展开更多
文摘The nanogrooved surface of polystyrene(PS) petri-dishes was induced by an ultraviolet laser irradiation method. The influence of the surface nanostructure on the growth of the human tongue squamous cells carcinomas (HTSCC) was investigated. Cells cultured on laser-irradiated PS surface show an enhanced attachment and spreading in HTSCC cell culture test, and cell orientation was successfully controlled by selectively treating the PS surface. We also prove that the nanostructures on polymer surface improved the cell attachment and spreading.
文摘TN305.2 2003043103聚二甲基硅氧烷微流控芯片的紫外光照射表面处理研究=Surface modification of poly(dimethylsiloxane)-fabricatedmicrofluidic chip by UV radiation[刊,中]/孟斐(浙江大学化学系微分析系统研究所.浙江,杭州(310028)),陈恒武…∥高等学校化学学报.-2002,23(7).-1264-1268研究了紫外光化学表面改性对聚二甲基硅氧烷(PDMS)微流控芯片的片基间粘接力及毛细管通道电渗流性能的影响。PDMS片基经紫外光射照后,粘接力增强,可实现PDMS芯片的永久性封合,同时亲水性得到改善,通道中的电渗流增大。与文献报道的等离子体表面处理方法比较,采用紫外光表面处理,设备简单,操作方便,耗费少,是一种简单易行的聚二甲基硅氧烷芯片表面处理方法。图7表1参10(张志升)
基金Project(52105175)supported by the National Natural Science Foundation of ChinaProject(BK20210235)supported by the Natural Science Foundation of Jiangsu Province,ChinaProject(JSSCBS20210121)supported by the Jiangsu Provincial Innovative and Entrepreneurial Doctor Program,China。
文摘Wetting condition of micro/nanostructured surface has received tremendous attention due to the potential applications in commercial,industrial,and military areas.Surfaces with extreme wetting properties,e.g.,superhydrophobic or superhydrophilic,are extensively employed due to their superior anti-icing,drag reduction,enhanced boiling heat transfer,self-cleaning,and anti-bacterial properties depending on solid-liquid interfacial interactions.Laser-based techniques have gained popularity in recent years to create micro/nano-structured surface owing to their high flexibility,system precision,and ease for automation.These techniques create laser induced periodic surface structures(LIPSS)or hierarchical structures on substrate material.However,micro/nanostructures alone cannot attain the desired wettability.Subsequent modification of surface chemistry is essentially needed to achieve target extreme wettability.This review paper aims to provide a comprehensive review for both laser texturing techniques and the following chemistry modification methods.Recent research progress and fundamental mechanisms of surface structure generation via different types of lasers and various chemistry modification methods are discussed.The complex combination between the laser texturing and surface chemistry modification methods to decide the final wetting condition is presented.More importantly,surface functionalities of these surfaces with extreme wetting properties are discussed.Lastly,prospects for future research are proposed and discussed.
基金Project(2017zzts111)supported by the Fundamental Research Funds for the Central Universities,China。
文摘The effects of SiCp surface modifications(Cu coating,Ni coating and Ni/Cu coating)on the microstructures and mechanical properties of Al matrix composites were investigated.Surface modification of SiC particles with Cu,Ni and Cu/Ni,respectively,was carried out by electroless plating method.SiCp/Al composites were prepared by hot pressed sintering followed by hot extrusion.The results show that the surface modification of SiC particles plays an effective role,which is relative to the type of surface coating,and the interfacial bonding become stronger in the following order:untreated SiCp<Ni(Cu)-coated SiCp<Ni/Cu-coated SiCp.The Ni/Cu-coated SiCp/Al composites exhibit the best comprehensive mechanical properties,with ultimate tensile strength(σUTS)and fracture strain(εf)of 389 MPa and 6.3%,respectively.Compared with that of untreated-SiCp/Al composites,theσUTS andεf are enhanced by 19.3%and 57.5%.
